1. Product Overview
The VaneAims FXB16F-LED is a versatile metal LED indicator light designed for various applications, including car and boat dashboards. It features a robust, waterproof construction and simplifies wiring with built-in resistors.
- Brand: VaneAims
- Product Type: Metal Indicator Light (AC/DC Universal)
- Core Feature: Built-in resistors, no additional resistors required for wiring; waterproof and durable metal construction.
- Size Range: 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 19mm, 22mm (mounting diameter)
- Certifications: CE, RoHS compliant
2. Key Specifications
| Item | Details |
|---|---|
| Product Model | FXB16F-LED |
| Head Shape | Flat Head |
| Mounting Diameter | 6mm / 8mm / 10mm / 12mm / 14mm / 16mm / 19mm / 22mm |
| Cable Length | 145mm (standard) |
| Waterproof Rating | IP67 |
| Material | Copper plating (nickel) |
| Color Options | Red / Blue / Yellow / White / Green |
| Rated Current | ≤20mA |
| Voltage Options | 3V / 6V / 12V / 24V / 220V (AC/DC universal) |
| Luminous Flux | <60 |
| Power Source | AC |
| Item Type | Indicator Lights, Pilot Lamp |
| Origin | Mainland China |
3. Installation & Wiring Instructions
3.1 Installation Steps
- Drill a mounting hole on the panel according to the selected size (6mm – 22mm).
- Insert the indicator light into the hole from the front of the panel.
- Secure the indicator light with the matching nut from the back of the panel.
- Connect the power cables to the corresponding terminals (AC/DC compatible, non-polar design, no need to distinguish positive and negative poles when wiring).
3.2 Wiring Note
- The indicator light has built-in resistors, so no additional resistors are needed when wiring.
- Ensure the operating voltage matches the selected voltage option (3V/6V/12V/24V/220V) to avoid burnout.
- Do not exceed the rated current (≤20mA) during operation.
▲ WARNING: Disconnect the power supply before wiring.
4. Operating Instructions
The VaneAims Metal LED Indicator Light operates simply by applying the correct voltage within its specified range (3-48V AC/DC or 220V AC/DC, depending on the model). Due to its non-polar design, the orientation of the power connection does not affect functionality.
Upon successful connection to a power source, the LED will illuminate in its designated color (Red, Blue, Yellow, White, or Green), providing a clear visual signal.
Video: Demonstration of the LED indicator lights powering on and displaying various colors.
5. Product Dimensions
Detailed dimensions for various mounting diameters are provided below to assist with installation planning.

Figure 5.1: Dimensions for the 6mm Metal Indicator Light (Flat Head type).

Figure 5.2: Dimensions for the 8mm Metal Indicator Light (Flat Head type).

Figure 5.3: Dimensions for the 10mm Metal Indicator Light (Flat Head type).

Figure 5.4: Dimensions for the 12mm Metal Indicator Light (Flat Head type).

Figure 5.5: Dimensions for the 16mm Cutout Flat Lamp (Flat Head type).

Figure 5.6: Dimensions for the 16mm Cutout Flat Lamp (Screw type).

Figure 5.7: Dimensions for the 19mm Cutout Flat Lamp (Flat Head type).

Figure 5.8: Dimensions for the 19mm Cutout Flat Lamp (Screw type).

Figure 5.9: Dimensions for the 22mm Cutout Flat Lamp (Flat Head type).

Figure 5.10: Dimensions for the 22mm Cutout Flat Lamp (Screw type).
6. Maintenance
To ensure the longevity and optimal performance of your VaneAims LED indicator lights, follow these simple maintenance guidelines:
- Cleaning: Gently wipe the surface of the indicator light with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the metal finish or the LED lens.
- Connection Check: Periodically inspect the wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to intermittent operation or failure.
- Environmental Protection: While the lights are IP67 waterproof, prolonged exposure to harsh chemicals or extreme temperatures should be avoided to prevent material degradation.
7. Troubleshooting
If you encounter issues with your LED indicator light, refer to the following common problems and solutions:
- Light Does Not Illuminate:
- Verify that the power supply is active and providing the correct voltage as specified for your indicator light model.
- Check all wiring connections for proper contact and ensure they are not loose or damaged.
- Confirm that the rated current (≤20mA) is not exceeded.
- Light Flickers or is Dim:
- Inspect wiring for loose connections or partial breaks.
- Ensure the power source is stable and not experiencing voltage fluctuations.
- Check for any signs of damage to the indicator light itself.
- Water Ingress:
- Although rated IP67, ensure the mounting nut is tightened correctly and the rubber seal ring is properly seated during installation to maintain the waterproof seal.
If the problem persists after following these steps, please consult the manufacturer or a qualified electrician.
8. User Tips
- Simplified Wiring: Thanks to built-in resistors, you do not need to add external resistors, making installation quicker and easier.
- Non-Polar Design: The AC/DC universal compatibility and non-polar design mean you don't have to worry about positive and negative pole orientation during wiring.
- Versatile Voltage: With a wide range of voltage options (3V to 220V), ensure you select the correct voltage variant for your specific application to prevent damage.
- Secure Mounting: Always ensure the indicator light is securely fastened with its matching nut and that the rubber seal ring is correctly positioned for optimal waterproof performance.
9. Frequently Asked Questions (FAQ)
- Q: Are you a trading company or manufacturer?
- A: We are a factory.
- Q: Do you provide samples? Is it free or extra?
- A: Yes, we can supply samples if we have ready parts in stock. Customers are responsible for the sample cost and courier fees.
- Q: What if I receive poor quality goods?
- A: We maintain strict quality control during manufacturing to ensure high-quality products. Our goal is customer satisfaction.
- Q: What drawing formats do you need for production?
- A: Both 2D and 3D formats are acceptable. 2D formats include PDF, CAD, JPG, etc. 3D formats include STP, IGS, STL, SAT, PRT, IPT, etc.
- Q: Can you produce according to samples?
- A: Yes, we can produce based on your samples or technical drawings. We can also build the necessary molds and fixtures.
10. Warranty & Support
For detailed warranty information and customer support, please refer to the official user manual PDF available from the manufacturer. This document provides comprehensive details regarding product guarantees, service terms, and contact information for technical assistance.
You can typically find the full user manual by searching for the product model 'FXB16F-LED' on the VaneAims official website or by referencing the PDF document: VaneAims FXB16F-LED User Manual (PDF).