1. Introduction
This user manual provides detailed instructions for the installation, operation, and maintenance of your ISUDAR T75X 9-inch Android 14 Car Radio. Please read this manual thoroughly before using the product to ensure safe and optimal performance. This device is designed to enhance your driving experience with advanced features like Carplay, Android Auto, GPS navigation, and multimedia playback.
2. Safety Precautions
- For any issues during installation or usage, please contact our after-sales support.
- Please install this product under professional guidance, as it involves electronic equipment and automotive accessories that may pose risks such as electric shock, injury, or other hazards if handled by untrained individuals.
- Ensure the power is disconnected during installation.
- It is highly recommended to seek professional help for the installation or servicing of this product, as it involves electronic equipment and automotive accessories that may pose risks such as electric shock, injury, or other hazards if handled by untrained individuals.
- This product is designed for vehicles with a 12V DC power system only. Do not install it on vehicles with a different power supply, as it may damage the product or cause a fire due to over-voltage.
- Turn off the car and disconnect the positive battery terminal before installation. Insulate all wires properly after installation to prevent short circuits that can lead to product damage or fires.
- Avoid using the car audio system for an extended period after turning off the engine to prevent draining the battery power.
- If the product gets exposed to water damage or foreign matter while driving, park the vehicle in a safe location, turn off the ignition switch (ACC OFF) immediately, and consult your dealer or customer service. Do not use the product in this condition, as it may result in fire, electric shock, or other failures.
- In case of smoke, strange noises, unusual odors, or any other abnormal signs during normal use, immediately turn off the power and consult your dealer or customer service. Do not use the product in this condition, as it may result in fire, electric shock, or other failures.
- Please place the product out of reach of children to avoid unnecessary harm.
- The manufacturer reserves the right to provide the final explanation.
3. Setup and Installation
This section guides you through the physical installation and initial setup of your car radio.
3.1 Wiring Diagram
Refer to the following diagram for proper wiring connections. Ensure all connections are secure before powering on the device.

Figure 3.1: Main Wiring Diagram. This diagram shows the connections for power, CANbus, GPS antenna, 4G antenna, rearview input, and USB cables.
- Power cable (optional)
- CANbus (optional): If your package includes the CANbus box, connect the CANbus port to the car radio socket.
- CANbus port (optional)
- GPS antenna
- 4G antenna
- Radio Antenna cable (optional)
- Rearview input/WiFi/Bluetooth antenna: This port must be installed for optimal WiFi & BT signal reception.
- 6-pin USB cable
- 4-pin USB cable
- RCA cable
Note: If your car has a JBL or other amplifier system, you may need a different power cord adapter or a more complicated wiring method. Please contact support if needed.
3.2 Power Plug Definition
The table below details the pinout for the power connector. This information is crucial for correct electrical installation.
| Pin | Attribute Name | Description |
|---|---|---|
| 1 | GND | Ground |
| 2 | B+ | Battery +12V |
| 3 | ACC | Accessory Power |
| 4 | ILL | Illumination |
| 5 | BACK UP | Camera Back up |
| 6 | WHEEL1 | Steering Wheel Control 1 |
| 7 | WHEEL 2 | Steering Wheel Control 2 |
| 8 | ANT+12V | Antenna Power |
| 9 | FR- | Front Right Speaker- |
| 10 | RL- | Rear Left Speaker- |
| 11 | FR+ | Front Right Speaker+ |
| 12 | RL+ | Rear Left Speaker+ |
| 13 | FL- | Front Left Speaker- |
| 14 | RR+ | Rear Right Speaker+ |
| 15 | FL+ | Front Left Speaker+ |
| 16 | RR- | Rear Right Speaker- |
Table 3.1: Power Connector Pinout Definition.
3.3 GPS Antenna Installation
The GPS Antenna is recommended to be installed on the dashboard or below the windshield for optimal signal reception.

Figure 3.2: Recommended GPS Antenna placement.
3.4 Frame Installation Tip
If replacing an existing car radio, transfer the snap clip from the original frame to the new one. Skip this step if not applicable to your vehicle.

Figure 3.3: Illustrates transferring snap clips for proper frame fitment.
3.5 CANBUS Setup
Setting the correct CANBUS type allows the car radio to better integrate with the original vehicle information system. This step is only necessary if your car radio includes a CANBUS Box and requires setup. If not, you can skip this step entirely.
Steps to set up CANBUS:
- Connect the device to Wi-Fi.
- Go to: Settings > Factory (Code: 123456) > Select models.
- Select: CanBox > Cars for > Models for > Config.
For example, if you purchased a car radio for a Jeep Renegade, and the CANBUS box shows the brand SS (Simple Soft), then choose: 03: Simple Soft > 87: JEEP > 11: 16 Renegade > LowConfig.

Figure 3.4: CANBUS configuration screen showing model selection.
4. Operating Instructions
4.1 Reverse Camera Functionality
This section details how to connect and configure your reverse camera.
4.1.1 Connection for Reverse Camera
For Original Camera: Just connect the yellow Port "A" to the yellow Port "B" as shown in the wiring diagram (Figure 3.1).
For Aftermarket Reverse Camera (With Canbus):
- Connect the yellow port “B" to the yellow port "C". The Camera red wire connects with the power cable wire “BACK" or "Reverse" (Camera Back UP: The 5th Pin on the “Power Connector" is the brown or pink wire).
- The red wire connects with red wire. The black wire connects with the Car reversing light negative electrode.
For Aftermarket Reverse Camera (Without Canbus):
- Connect the yellow port "B" to the yellow port "C". The Camera red wire connects with the power cable wire “BACK" or "Reverse" (Camera Back UP: The 5th Pin on the “Power Connector" is the brown or pink wire).
- The red wire connects with red wire and connects with the Car reversing light positive electrode. The black wire connects with the Car reversing light negative electrode.

Figure 4.1: Detailed wiring for original and aftermarket reverse cameras.
4.1.2 Setting for Reverse Camera
Test the Reverse Camera Display: Shift the gear into reverse and check if the rearview camera displays a proper image. If the image does not appear correctly, follow these steps:
- Settings > Reverse > Reversing System selection > Set the correct camera format.
- Engage reverse gear in your car > Tap the car screen > Tap the setting icon > Set the correct camera format.
Default Setting:
- For original rearview camera: The "NTSC" format is recommended.
- For aftermarket rearview camera: If your camera uses a different format, please select the appropriate option based on its specifications. If you have installed an AHD camera, the "AHD 1080P-25Hz" format is recommended.

Figure 4.2: Reverse camera settings for format and system selection.
4.2 System Settings
4.2.1 Steering Wheel Control
To configure steering wheel controls:
- Click the Steering Wheel icon to open the settings page.
- Click "START", press the corresponding button on the screen, and then press the physical button on the steering wheel. After learning, the button will be highlighted.
- After setting all the necessary buttons, click “END” to complete and save.
Note: For car radios equipped with CANBUS, the steering wheel control buttons are directly decoded by CANBUS and do not require setting in this application. If your car radio is equipped with CANBUS, but the steering wheel control buttons still do not work after setting the CANBUS type, please contact after-sales support for reset instructions.
Video 4.1: Demonstration of button functions and touch button settings, including steering wheel control configuration.
4.2.2 Other Settings
Logo Setting: You can customize your startup image.
- Prepare the image: Bitmap 32bit, Resolution 1024*600, 1280*720, or other (depending on your screen resolution), Format: BMP, PNG, JPG.
- Copy the logo image to a USB flash drive.
- Insert the USB flash drive into the USB port of the car radio.
- Click "Settings > Factory (Code:123456) > LOGO Setting”, enter the logo setting option, select the image from the USB, and click "Logo setting".
Animation Boot Logo:
- Prepare the animation: Bitmap 32bit, Resolution 1024*600, 1280*720, or other, Format: Zip.
- Copy the boot animation compressed package to the USB root directory interface.
- Insert the U-disk into the device USB port.
- Click on "Boot Animation > Pull down the status bar and click the "Menu" > An import box will pop up > Click "Import from external storage" and a password box will pop up > Enter the password "Topway". Select the zip and click "Confirm".
Radio Setting:
- Adjust the radio reception area: Settings > Factory (Code:123456) > Select radio region > Default Radio Area.
- RDS: Settings > Factory (Code:123456) > Config info > RDS > ON/OFF.
Button Color:
- Click "Color" > Select the desired physical button color.
- If you don't have the Color app, click "Settings > Factory (Code:123456) > Config info > Color > ON/OFF”.
5. Connectivity
5.1 Wired & Wireless Carplay
To use Carplay, click the Tlink5 APK to enter the page. Then click the Setting icon to access Carplay & Android Auto settings.
5.1.1 Wired connection
- Turn off the WiFi and Bluetooth of the phone.
- Use a 4 pin USB cable to connect.
5.1.2 Wireless connection
- Turn on WiFi and Bluetooth of your iPhone.
- Find the Bluetooth of the stereo and connect it (Bluetooth name: CarKit_blink, PIN password: 0000).
- When your iPhone is connected for the first time, it will display on the phone screen:
- Bluetooth Pairing Request: Click "Pair”
- Allow Contacts and Favorites Sync? : Click “Allow”
- Use CarPlay with “ZLINK” ? : Click “Use CarPlay”
- Click the Tlink5 APK. The car stereo will display "Connecting, please wait..." and then enter the CarPlay page. After a successful CarPlay connection, it will automatically switch to Wi-Fi connection.
Tips: Long press the bottom left lower corner menu key to activate Siri. Click the "Car" icon to return to the car stereo's app interface.

Figure 5.1: Wireless and Wired Apple Carplay and Android Auto functionality with Mirror Link support.
5.2 Wired & Wireless Android Auto
To use Android Auto, click the Tlink5 APK to enter the page.
5.2.1 Wired connection
- Turn off the WiFi and Bluetooth of the phone.
- Use a 4 pin USB cable to connect.
- Turn on the Android Auto app on your phone.
5.2.2 Wireless connection
- Go to Play Store and download the Android Auto App in your phone.
- Turn on WiFi and Bluetooth of your phone.
- Find Bluetooth of the stereo (Bluetooth name: CarKit_blink, PIN password: 0000) and connect with it.
- Turn on the Android Auto app on your phone after connecting the Bluetooth successfully.
Note:
- Please make sure that your phone supports Google services and wireless Android Auto.
- Apple CarPlay & Android Auto does not support playing video APP like YouTube due to safety considerations while driving.
- After accessing Carplay & Android Auto, if you want to exit Carplay & Android Auto and play music using Bluetooth, please turn off WiFi instead of disconnecting Bluetooth to disconnect.
5.3 Mirror Link
5.3.1 iPhone AirPlay Connection
Click the ZLINK APK to enter the page. Switch to the Mirror Link page by pressing the icon.
Click the icon to switch wireless/wired mirroring connection.
- On the car radio, tap the iPhone icon to activate hotspot connection mode. Then, connect the car radio to your iPhone's personal hotspot.
- On your iPhone, open “Control Center”, tap “Screen Mirroring”, and select "zj-airplay”. Once connected, wireless screen mirroring will begin successfully.
5.3.2 Android Link Connection
- Tap the Android icon and scan the QR code to download the app.
- Turn on your phone's BT and connect it to the car radio. After connection, turn off your phone's Wi-Fi and enable the mobile hotspot.
- Connect the car radio to your phone's hotspot. Select Wireless Connection, then enter the setup wizard.
- On your phone, tap Start Screen Mirroring. The screen will then be mirrored successfully.
6. Specifications
The ISUDAR car radio offers various configurations. Below is a detailed comparison of the different models (LX5A, T10C, T58M, T58B, Q74X, T75X).

Figure 6.1: Comparison of key features across different ISUDAR car radio models.
| Feature | LX5A | T10C | T58M | T58B | Q74X | T75X |
|---|---|---|---|---|---|---|
| Chip | Allwinner F133 | Allwinner A100 | Allwinner T820 | Allwinner T820 | Qualcomm 6115 | UIS7865 |
| Cores | 1 | 4 | 8 | 8 | 8 | 8 |
| System | LINUX | 10 | 13 | 13 | 13 | 14 |
| RAM | X | 2GB | 4GB | 6GB | 8GB | 8GB |
| ROM | X | 64GB | 64GB | 128GB | 128GB | 128GB |
| Carplay | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Android Auto | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 4G Network | X | X | X | X | ✓ | ✓ |
| Wifi | ✓ | Wifi 6 | Wifi 6 | Wifi 6 | 2.4G & 5G | 2.4G & 5G |
| Bluetooth | ✓ | 5.4 | 5.4 | 5.4 | 5.0 | 5.0 |
| Video Playback | 1080P | 1080P/2K/4K | 1080P/2K/4K | 1080P/2K/4K | 1080P/2K/4K | 1080P |
| Amplifier | 4*45W | 4*45W | 4*47W | 4*47W | 4*47W | 4*47W |
| Radio | FM | FM | FM/AM/RDS | FM/AM/RDS | FM/AM/RDS | FM/AM/RDS |
| DSP | X | X | ✓ | ✓ | ✓ | ✓ |
| USB Ports | 2 | 2 | 3 | 3 | 3 | 3 |
| Navigation | X | GPS & GLONASS | GPS & GLONASS | GPS & GLONASS | GPS & GLONASS | GPS & GLONASS |
| Reverse camera | Support | Support | Support | Support | Support | Support |
| Cooling fan | X | X | ✓ | ✓ | ✓ | ✓ |
Table 6.1: Detailed Specifications for ISUDAR Car Radio Models.
General Specifications (Applicable to T75X model unless specified)
- Chipset: UIS7865/Qualcomm Snapdragon 662(SM6115)
- Processor Speed: 4*Cortex-A73 2.0Ghz, 4*Cortex-A53 1.8GH
- Processor Type: 8 core
- Operating System: Android 13 (T75X is Android 14)
- RAM: 8G
- ROM: 128G
- Display Size: 9"
- Resolution: 1280*720P (QLED screen for T75X)
- Out Power: 4*47W
- Voltage: 12 V
- Item Weight: 2kg
- Item Size: 9 inch display screen
- Special Features: Built-In Speaker/Microphone, WiFi function, Support 3G/4G Network, Built-in GPS, Charger, Mobile Phone, MP3 players, Voice Control, DSP, CarPlay, Android Auto, Reversing Input, Split Screen, Support steering wheel control
- Digital Media Format: Mp3, MP4, WMA, JPEG
- OSD Language: Multi-language support (Chinese, English, Arabic, German, French, Spanish, etc.)
- Certification: CE, RoHS
- On-line Weather: Support
- On-line Theme: Optional
- Carplay & Android auto: Support
- Subwoofer: Support
- Microphone: Built-in

Figure 6.2: T75X model CPU, Android version, RAM, and ROM details.
7. Troubleshooting (FAQ)
This section addresses common issues and provides solutions.
7.1 Why are my steering wheel controls and rear-view camera functions not working properly?
You may need to reconfigure the Canbus type. Please contact our after-sales support to receive guidance on the specific Canbus settings for your vehicle model.
7.2 Black screen / can't power on.
- Press the RST button on the car stereo. This button is typically used to reset the system and may help resolve any temporary issues.
- Check if the car stereo is receiving a stable DC12V voltage. Ensure that the power source is providing the correct voltage to the stereo.
- Inspect the car stereo fuse to see if it is burnt out. If the fuse is blown, replace it with a new one of the same rating.
- Reconnect the BATT + / ACC / GND wires of the car stereo to the corresponding BATT + / ACC / GND wires of the original car wiring. Ensure the connections are secure and properly aligned.
7.3 My car has an amplifier system. Why is there no sound after installation?
- Please ensure that the power cable we provided is compatible with your car. If it's not, contact our after-sales support for a compatible power cable.
- Please connect the AUX cable of the power cable to the AUX cable of the RCA cable. AUX-L-IN = AUDIO OUT L; AUX-R-IN = AUDIO OUT R; AUX L = AUX IN L; AUX R = AUX IN R.
- Make sure the power cable we provided includes a separate blue AMP Control wire, which should be connected to the blue "AMP CONT" wire on the RCA harness.
- Turn on the amplifier switch in the settings: The amplifier and fan share a power supply. Therefore, please enable "Always on" in the Fan app.
7.4 Why can't I play videos while driving?
For safe driving, video playback is disabled. You need to set it to open as follows: Settings > Factory (Code:8888) > Brake setting > Close.
Video 7.1: Demonstration of video playback settings, including disabling video while driving.
7.5 Why does the music stop when reversing?
For safety reasons, you need to turn it on as follows: Settings > Reverse > Reversing volume control, and adjust the volume to your desired level.
7.6 How to set up automatic connection to CarPlay after connection Bluetooth?
Setting follow: Settings > General > Application self start > Tlink5.
7.7 How to change between Celsius and Fahrenheit units?
First, connect your car stereo to your phone's hotspot or WiFi. Then, open the weather app. Click the gear icon in the top right corner and select your preferred temperature unit. To switch the air conditioning temperature unit: Settings > Original > TEMP norm > Fahrenheit/Centigrade > confirm.
7.8 How to change the speed unit?
Please follow the path below to modify the settings: Click the "Theme" APP icon > Click the gear icon in the upper right corner > Plugin > Speed unit.
7.9 Why is the time or time zone not updating automatically?
Follow this path to set it: Settings > System > Date & Time, connect your car stereo to your phone's hotspot or WiFi and then open the "Set time automatically".
7.10 Why is my weather information and location not updated?
You need to connect the car stereo to your mobile phone hotspot or WiFi, and the weather information and location will be updated online.
7.11 The touch screen is not sensitive or the touch position is wrong.
Find a wired mouse and connect it to the USB port, then use the mouse cursor to click the following path to enter the settings: Settings > Factory (Code:123456) > Touch area key > POSITION, Then select "CALBRATION", last you need to click the screen position with your finger instead of clicking the mouse.
7.12 How to use the picture-in-picture function?
Settings > General > Video suspension window > ON.
7.13 If I don't have a factory-installed rearview camera and don't want the reversing image to be displayed when reversing, how do I turn it off?
Settings > Factory (Code: 123456) > Reverse Mode > Prohibit reversing.
7.14 How to change the language?
Settings > More > System > Languages > System Languages.
8. Maintenance
Proper maintenance ensures the longevity and optimal performance of your ISUDAR car radio.
- Keep the screen clean using a soft, dry cloth. Avoid abrasive cleaners that could scratch the display.
- Ensure proper ventilation around the unit to prevent overheating, especially during extended use.
- Regularly check wiring connections for any signs of wear, corrosion, or looseness to prevent electrical issues.
- Update the system software periodically to ensure optimal performance, security, and access to new features. Check the manufacturer's website for the latest updates.
9. User Tips
Maximize your experience with these helpful tips:
- For optimal GPS performance, ensure the GPS antenna is placed in a clear line of sight, such as on the dashboard or below the windshield, away from obstructions.
- If experiencing issues with steering wheel controls, double-check the CANBUS settings as described in Section 3.5. If your vehicle has a complex amplifier system, contact support for specific wiring guidance.
- To personalize your device, explore the online theme launchers and custom boot logo options available in the system settings (Section 4.2.2).
- When using wireless Carplay/Android Auto, ensure your phone's Bluetooth is connected to the stereo and Wi-Fi is enabled for the connection. If you wish to switch to Bluetooth music playback, remember to turn off Wi-Fi on the head unit to avoid potential conflicts and ensure a smooth transition.
- Utilize the online voice control feature (available on T10C, T58M, T58B, T75X models) for hands-free operation. Remember that an activated code might be required for full functionality.
10. Warranty and Support
This product comes with a 12-month warranty from the date of receipt of the goods. The valid replacement period is 14 days from the date of receipt of the goods.
For any issues during installation or usage, please contact our after-sales support.
Contact Information:
- Email: compliance.gavimosa@outlook.com
- Support Email: xyl-supports@aliyun.com
The manufacturer reserves the right to provide the final explanation regarding product specifications and warranty terms.