Skmei SKMEI 2396

Contents

SKMEI 2396 Outdoor Sports Watch User Manual

Dual Display, Waterproof, Multi-functional

1. Product Overview

Thank you for choosing the SKMEI 2396 Outdoor Sports Watch. This watch combines analog and digital displays with multiple functions designed for an active lifestyle. Please read this manual carefully to understand the operation and features of your new watch.

SKMEI 2396 watch, front view with khaki band

Figure 1: SKMEI 2396 Watch Front View

Key Features:

  • Dual Display: Analog and Digital timekeeping.
  • Water Resistance: 50M (5ATM) for daily use, swimming, and light rain.
  • Multi-functional: Stopwatch, Alarm, Date, Week, LED Backlight, Multiple Time Zones.
  • Durable Construction: Plastic case, Resin dial window, Silicone band.

Button Functions:

Diagram showing watch buttons and their functions

Figure 2: Watch Buttons and Their Functions

  • LIGHT Button (Top Left): Activates the LED backlight.
  • MODE Button (Bottom Left): Cycles through different modes (Time, Alarm, Stopwatch, Dual Time).
  • START/STOP Button (Top Right): Starts/stops stopwatch, adjusts settings in setting mode.
  • RESET Button (Bottom Right): Resets stopwatch, adjusts settings in setting mode.

2. Setup and Initial Settings

Setting Digital Time and Date:

  1. From the normal time display, press the MODE button three times until the seconds start flashing. This indicates you are in time setting mode.
  2. Press the RESET button to cycle through the setting items: Seconds → Hour → Minute → Month → Date → Day of Week.
  3. Use the START/STOP button to adjust the flashing item.
  4. Once all settings are correct, press the MODE button to exit the setting mode.

Setting Analog Time:

  1. Pull out the crown (the small knob on the right side of the watch case).
  2. Turn the crown to adjust the analog hands to the desired time.
  3. Push the crown back in to start the analog timekeeping.

12/24 Hour Format:

In the normal time display, press the START/STOP button to toggle between 12-hour (AM/PM indicator) and 24-hour formats.

3. Operating Instructions

Using the Stopwatch:

  1. From the normal time display, press the MODE button once to enter Stopwatch mode.
  2. Press the START/STOP button to start the stopwatch.
  3. Press the START/STOP button again to stop the stopwatch.
  4. Press the RESET button to reset the stopwatch to zero.
  5. Press the MODE button to return to normal time display.

Setting and Using the Alarm:

  1. From the normal time display, press the MODE button twice to enter Alarm mode. The hour digits will flash.
  2. Press the START/STOP button to adjust the hour.
  3. Press the RESET button to switch to minute setting.
  4. Press the START/STOP button to adjust the minutes.
  5. Press the MODE button to exit Alarm setting mode.
  6. To turn the alarm ON/OFF, in Alarm mode, press the START/STOP button. An alarm icon will appear/disappear.

Using the LED Backlight:

Press the LIGHT button (top left) at any time to illuminate the digital display for a few seconds.

Watch display with LED backlight activated

Figure 3: LED Backlight in Action

Dual Time Function:

Your watch supports a second time zone. To set it:

  1. From the normal time display, press the MODE button three times to enter time setting mode, then press MODE again to cycle past the main time settings until you see the dual time display (often indicated by 'DT' or similar).
  2. The hour digits for the second time zone will flash. Use START/STOP to adjust the hour.
  3. Press RESET to switch to minute setting for the second time zone. Use START/STOP to adjust minutes.
  4. Press MODE to exit.
Watch on wrist showing dual time display

Figure 4: Dual Time Display

4. Maintenance

Water Resistance (50M / 5ATM):

Watch submerged in water demonstrating 50M water resistance

Figure 5: 50M Water Resistance

Your watch is designed to withstand water pressure up to 50 meters. This means it is suitable for:

  • Daily use (splashes, rain).
  • Showering (avoid hot water).
  • Swimming in shallow water.

Important: Do NOT operate any buttons while the watch is submerged in water, as this can compromise the water seal.

Cleaning:

Wipe the watch case and band regularly with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by drying.

Battery Replacement:

When the display becomes dim or the watch stops functioning, the battery may need replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure the water resistance is maintained.

Close-up of watch back cover and clasp

Figure 6: Watch Back Cover and Clasp

5. Troubleshooting

  • Display is blank or dim: The battery may be low or depleted. Replace the battery.
  • Buttons are unresponsive: Try pressing all buttons firmly. If still unresponsive, the watch might need a battery replacement or a reset (if applicable, consult a technician).
  • Time is inaccurate: Ensure the time is set correctly. If the watch consistently loses or gains time, the movement may be faulty, and professional service is recommended.
  • Water inside the watch: If you notice condensation or water droplets inside the watch, stop using it immediately and seek professional repair to prevent further damage.

6. Specifications

Product parameter diagram with watch dimensions and specifications table

Figure 7: Product Parameters and Dimensions

FeatureSpecification
BrandSKMEI
Model Number2396
Display TypeAnalog-Digital
MovementDigital
Water Resistance Depth5Bar (50M)
Case MaterialPlastic (ABS + TPU)
Band Material TypeSilicone (TPU)
Dial Window Material TypeResin
Clasp TypeBuckle (Stainless Steel)
Case ShapeRound
Case Width56mm
Case Thickness20mm
Band Width27.2mm
Band Length26cm (Watch Length)
Weight73.3g
FeaturesStop Watch, Luminous, Back Light, LED Display, Chronograph, Complete Calendar, Multiple Time Zone, Alarm, Week Display

7. User Tips

  • Read the Manual: Familiarize yourself with all functions to get the most out of your watch.
  • Avoid Extreme Temperatures: Do not expose your watch to extreme heat or cold, as this can affect its accuracy and lifespan.
  • Regular Cleaning: Keep your watch clean to prevent dirt buildup, especially on the band and around the buttons.
  • Check Water Resistance: Always ensure the crown is pushed in completely before exposing the watch to water.

8. Warranty and Support

For warranty information and customer support, please refer to the terms provided by your original seller or retailer. Keep your proof of purchase for any warranty claims.

9. Product Video Showcase

Video: A visual demonstration of the SKMEI 2396 watch's features and design.

© 2023 SKMEI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.