HXCONTROLLER MPPT Solar Charge Controller 40A-100A

Contents

HXCONTROLLER MPPT Solar Charge Controller

Models: 40A, 60A, 80A, 100A

1. Product Overview

Thank you for choosing the new generation of MPPT controller produced by our company. This product is developed according to the latest technology, representing the latest level of photovoltaic technology development, and has many excellent performances.

Basic Functions:

  • Innovative maximum power point tracking technology can significantly improve the energy utilization rate of the solar system, with a conversion efficiency of up to 97%.
  • Quickly scan the entire I-V curve, and efficiently track the maximum power point.
  • Three types of lead-acid batteries (sealed, colloidal, and open type) and lithium battery series charging programs are optional.
  • With automatic protection of overcharge, overdischarge, overload, and short circuit.
  • RS485 communication interface allows multi-machine communication, convenient for viewing controller operating parameters.

Key Features:

  • Advanced MPPT maximum power point tracking technology, tracking efficiency no less than 99.5%.
  • LCD designed to dynamically display operation data and working status.
  • Compatible with Seal, GEL, Flooded, LifePO4 battery charging (user battery can adjust charging).
  • Dual USB 5V charging ports.
  • 12V/24V/36V/48V/60V/72V/84V/96V automatic identification.
  • Over-voltage, over-current, and over-temperature protection.
  • Max input solar panel voltage (VOC) is 230VDC.
  • Support RS485 WIFI Device (optional, purchased separately).
HXCONTROLLER MPPT Solar Charge Controller front view
Figure 1: HXCONTROLLER MPPT Solar Charge Controller

2. Safety Precautions

This manual introduces the related operations of the MPPT solar charge controller. It is applicable to all models of our MPPT solar charge controller and is intended for installers and operators.

Before installing and operating the controller, please read this manual first and keep it in a safe place for easy reference.

  • Ensure all wiring is correct and secure before powering on the system.
  • Do not attempt to repair the controller yourself. Contact qualified personnel for service.
  • Ensure proper ventilation around the controller to prevent overheating.
  • Connect batteries with correct polarity to avoid damage to the controller and battery.
  • Use appropriate wire gauges for all connections to handle the expected current.

3. Setup and Installation

3.1. Installation Safety Distance

Observe the following safety clearances and ensure that other equipment or objects are not within this range to ensure that there is enough space for heat dissipation.

DirectionSafe Distance
Left and Right20cm
Up30cm
Down30cm

3.2. Connection Method

The correct wiring sequence of the solar controller is as follows:

  1. First connect the positive and negative poles of the battery.
  2. Connect the positive and negative poles of the DC load.
  3. Finally, connect the positive and negative poles of the solar panel.
Solar system connection diagram
Figure 2: Connection Diagram

Wiring Diagram Details:

Controller ports and interfaces
Figure 3: Controller Ports and Interfaces
  1. Temperature sensor interface
  2. Solar panels input terminals (+/-)
  3. Battery terminals (+/-)
  4. DC load terminals (+/-)
  5. RS485 interface
  6. Terminal box cover plate
  7. LCD display
  8. Cooling hole

4. Operating Instructions

4.1. Key Operation

Controller buttons and indicators
Figure 4: Controller Buttons and Indicators
No.NameNo.Name
1Solar panel indicator (PV)5SET / Back button
2Charging indicator (CHARGE)6UP button
3DC load indicator (LOAD)7DOWN button
4Warning indicator (ALARM)8CONFIRM button (press for 3 seconds)

4.2. LCD Main Interface Description

The LCD dynamically displays the operation data and working status of the equipment.

LCD display elements explanation
Figure 5: LCD Main Interface Elements
No.Name (System default main interface)
1DC Voltage (from solar panels)
2Controller Generation Wattage
3Charging Current
4Battery Voltage
5Total Power Generation (Kwh)

4.3. Parameter Setting Steps

In the default main interface, press the SET button to enter the main menu. Use DOWN or UP buttons to view the submenu options. Press CONFIRM to enter a selected option.

  • Language Setting: Available in Chinese and English.
  • DC Output Setting: Click to select to turn on or off the DC load.
  • Battery Type Setting: There are 4 built-in battery types (Lead Acid, Gel, LifePo4, Li-ion) to choose from, and users can add custom battery types. After selecting the battery type, click CONFIRM to set the required voltage.
  • Charging Current Setting: The charging current setting range varies with different products. Refer to the

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.