1. Product Safety Notice
The user manual contains important information about the assembly and use of the e-bike. Read the entire user manual carefully and pay particular attention to the safety notice before using the e-bike. Failure to follow this manual may result in serious injury or damage to the e-bike.
- Always wear a helmet when riding your e-bike.
- Keep the battery keys properly. If the keys are lost, you will not be able to unlock or lock the battery.
- Ensure the e-bike's battery is fully charged before every ride.
- Always familiarize yourself with local road laws and strictly adhere to them.
- Do not ride the e-bike under the influence of drugs or alcohol.
- Always respect pedestrians.
- Do not operate the e-bike under wet conditions, as this may lead to loss of control and injury. Wet environments may also damage the e-bike's electronics and void the warranty.
2. Parts & Components
Familiarize yourself with the main parts and components of your URLIFE E20 electric bicycle:
- Handlebar: For steering and control.
- Frame: The main structure of the bicycle, made of Carbon Steel.
- Front light: Provides illumination for night riding.
- Fork: Front suspension for a smoother ride.
- Disc brake: Provides reliable stopping power.
- Tire(tyre): 20-inch fat tires for all-terrain riding.
- Saddle: The seat for the rider.
- Seatpost: Supports the saddle and allows for height adjustment.
- Battery: 48V 13Ah Lithium battery, providing power to the motor.
- Rack: Rear cargo rack for carrying items.
- Rearlight: Provides visibility from the rear.
- Motor: 250W Brushless DC Motor.
- Pedal: For manual propulsion.
- Chainwheel: Front gear for the chain.
- Controller: Manages motor and battery functions.
- Chain: Connects the chainwheel to the rear gears.
Included Accessories:
- User Manual (x1)
- Pedals (x2)
- Charger (x1)
- Hex Wrench (x3)
- 15mm External Hex Wrench (x1)
- Warranty Card (x1)

3. Assembly Instructions
For a visual guide, please refer to the official installation video on YouTube: https://www.youtube.com/@URLIFEBIKE
3.1. Handlebar Installation
- Use a hex screwdriver to unscrew the four nuts on the handlebar stem lock cap.

Step 1: Unscrew the handlebar stem nuts. - Assemble the handlebars and tighten the four nuts in the order shown in the picture.

Step 2: Assemble and tighten the handlebars.
3.2. Front Fender and Headlight Installation
- As shown in the picture, unscrew the nut for later use.
- Assemble and install the headlights and mudguards, align them with the holes, and tighten them with the nuts that were removed earlier.
3.3. Front Wheel Installation
- Remove the front fork axle and do not use it. Align the front wheel with the front fork and place it into the slot smoothly, ensuring the disc rotor is aligned with the brake caliper.
- Take out the quick-release skewer, fit the springs in order, and insert it through the wheel axle from one side.
- First install and secure the front fork safety hook/anti-drop washers, then install and tighten the quick-release nut, and finally close the quick-release lever. After installation, check that the front wheel is tight, rotates smoothly, and the brake does not rub against the disc rotor.
3.4. Rear Rack and Rear Lights Installation
- Unscrew the rear shelf support rod and the nuts on both sides, align the rear shelf with the screw holes on the support rod, and tighten the support rod nuts and the nuts on both sides.
- Unscrew the rear light nut, align it with the nut hole on the rear rack, and tighten the nut.
3.5. Seat Installation
- Place the saddle into the clamp slot smoothly, adjust it to the proper position and angle. Tighten the clamp fixing screw to ensure the saddle is securely installed without looseness.
- Hold the saddle body and align it with the saddle clamp on the seat post.
3.6. Left and Right Foot Pedals Installation
- Identify Left/Right Pedals: Check the markings on the pedals (L = Left, R = Right). Do not install them in reverse.
- Install the Left Pedal: Align the pedal marked "L" with the left crank arm, then turn it counterclockwise to tighten securely.
- Install the Right Pedal: Align the pedal marked "R" with the right crank arm, then turn it clockwise to tighten securely. Check Installation: Ensure both pedals are tight and rotate smoothly after installation.
4. Operating Instructions
The URLIFE E20 features a colorful LCD HD display for easy monitoring of your ride data and settings.

4.1. Display Functions
- Speed Modes: View Average Speed (AVG SPEED), Maximum Speed (MAX SPEED), and Real-time Speed (RT SPEED).
- Battery Indicator: A 5-segment battery level indicator with digital percentage display. An optimized algorithm ensures stable battery level prompts. If the system supports battery communication, it can display an accurate percentage.
- Headlight Indicator: Long press the '+' button to turn on the headlights. The instrument displays a light symbol.
- Brake Prompt: Displays a brake symbol when power is cut off during braking.
- Gear Indicator: Shows the current assist level (0~3), where 0 is neutral (no assist) and 1~3 corresponds to assist levels. In 6km push mode, "P" is displayed.
- Fault Prompt: Displays a fault symbol when an error is detected. Refer to the troubleshooting section for fault codes.
- Mileage Modes: Includes Single Trip (TRIP), Total Mileage (ODO), and Riding Time (TIME).
- Mileage Display: Shows mileage or time information according to the selected mode.
4.2. Power On/Off
- When using for the first time, insert the battery key into the battery lock, turn it to the right to 'On' and remove the key. The battery power can be output normally.
- Long press the left power button on the display to turn the e-bike on or off.
4.3. Assist Level Selection
In manual gear shift mode, briefly press the '+' or '-' button to change assist levels and adjust the power ratio. The system offers 3 levels (1 being minimum, 3 maximum), with level 1 set as default when powered on. Level 0 indicates neutral with no assist.
5. Precautions
5.1. Battery and Charging
- Charge within 0°C~45°C, discharge within -20°C~60°C. Keep the battery dry.
- Do not expose the battery to acidic or alkaline liquids, avoid rain, and keep away from fire, heat sources, and high-temperature environments.
- Do not reverse the battery polarity, disassemble the battery, or cause a short circuit.
- Use the original charger and do not charge for more than 12 hours. The charging current should not exceed 2A.
- If not used for a long time, store the battery in a cool, dry place and charge it for two hours every month.
- Follow the charging instructions; otherwise, the consequences are at your own risk.
- Ensure the charger is compatible with the battery type and voltage. Do not mix chargers.
- Charge in a well-ventilated area; avoid charging in enclosed spaces or under direct sunlight.
- When charging, connect the battery first, then plug in the power. After charging, disconnect the power first, then remove the battery.
- Stop charging when the green light turns on. Do not leave the charger connected to the power source without charging.
- If the indicator light is abnormal, there is a strange smell, or the charger overheats, stop charging immediately and have the charger checked or replaced.
- Do not disassemble used batteries; they are hazardous and should be recycled by professional departments.
- Avoid foreign objects, especially water or other liquids, entering the charger to prevent short circuits.
- Do not carry the charger with the bike unless it is properly cushioned and placed in a toolbox. Do not disassemble or replace components inside the charger.



5.2. Riding
- Do not use the product before reading the manual and understanding its performance.
- Do not lend the bike to someone who cannot operate it to avoid injury.
- Always wear a helmet, follow traffic rules, and do not ride on motor vehicle lanes or crowded pedestrian paths.
- Do not carry passengers or items beyond the legal limit. Do not park in building entrances, stairwells, walkways, or emergency exits.
- Do not charge or park in residential buildings. Keep the bike away from flammable materials when charging, and do not charge for too long.
- Ride at a speed not exceeding 15km/h on non-motorized lanes, downhill, or uneven roads. Ride on the right side if there is no non-motorized lane.
- Adjust the distance or slope carefully to avoid crossing safety lines of other vehicles or passengers.
- Check tire pressure before riding; recommended pressure is 35-45 PSI.
- Check the electrical circuit, lighting, and other systems before riding.
- Ensure the front and rear brakes are working, the handlebar and wheels are securely fastened, and the reflectors are not damaged or dirty.
- Keep the motor clean and lubricated.
- Do not exceed the maximum load capacity of 120kg.
- Braking distance increases in rain or snow; ride slowly and carefully.
- Avoid riding in heavy rain or other severe weather conditions.
- Do not ride with one hand. The bike is suitable for users aged 18-45. Do not allow anyone under 16 to ride the electric bicycle on public roads.
6. Maintenance and Care
- Ensure the front and rear wheels are centered on the fork or frame.
- Store the bike in a shaded, dry place after riding.
- Do not wash the bike with water; use a damp cloth to clean the surface.
- Regularly check the motor and brakes; do not oil the brakes.
- Regularly check and tighten all screws and bolts.
- Recommended torque (in kgf.cm): Handlebar screws 60-80, stem screws 175-200, seat screws 175-250, wheel screws 320-450.
- Regularly check the chain tension and adjust it with the chain tensioner.
- Regularly inspect the tires for damage, cracks, or excessive wear. The inner tube and valve should be perpendicular to the rim. Replace the tire immediately if it is punctured or excessively worn. Seek professional help for tire replacement.
- Do not modify the frame, fork, stem, or other critical structural or electrical components. Use original parts for replacements; otherwise, the warranty will be void, and any damage or loss caused by modifications is your responsibility.
7. Troubleshooting: Fault Codes
The UKS1 display can provide error indications for vehicle faults. When a fault is detected, the system will display an error code "n" and its description in the speed display area. Refer to the table below to identify the corresponding fault.
| NO | Fault Information | Display Code | Remarks |
|---|---|---|---|
| 1 | Brake System Fault | 02 | |
| 2 | Pedal Assist Sensor Malfunction | 03 | |
| 3 | Battery Under-Voltage | 06 | |
| 4 | Motor Failure | 07 | |
| 5 | Throttle Fault | 08 | |
| 6 | Controller Error | 09 | |
| 7 | Communication Receive Failure | 10 | Cannot receive display data |
| 8 | Communication Transmit Failure | 11 | Cannot receive controller data |
8. Product Specifications
The URLIFE E20 electric bicycle is designed for adults and teens, offering a blend of power, range, and comfort.

8.1. Exterior Dimensions
| Parameter | Specification |
|---|---|
| Model | E20 |
| Frame Material | Carbon Steel |
| Unfolded Size | 1630*730*1120mm |
| Package Size | 1370*240*650mm |
| Wheelbase | 1070mm |
| Pedal Height from Ground | 120mm |
| Wheel Size | 20 inches |
| Frame Color | Black/Green |
8.2. Performance Parameters
| Parameter | Specification |
|---|---|
| Frame Weight | 30 ± 0.3KG |
| Load Capacity | 120kg |
| Power Consumption per 100km | 3.75kwh |
| Electric Range | 40-60 Miles |
| Pedal Assist Range | 60-80 Miles |
| Maximum Climbing Angle | 15° |
| Operating Temperature | -10~45°C |
| Waterproof Rating | IP54 |
8.3. Parameter Configuration
| Parameter | Specification |
|---|---|
| Model | E20 |
| Battery Type | Lithium-ion Battery |
| Battery Capacity | 13 Ah |
| Battery Rated Voltage | DC48V |
| Charging Voltage | DC54.6V |
| Charger Input Voltage | AC100-240V |
| Charging Time | 6-7 hours |
| Motor Type | Brushless DC Motor |
| Motor Rated Speed | 450/min |
| Motor Rated Voltage | 48V |
| Controller Undervoltage Value | 41V±1V |
| Controller Current Limit | 18±1A |
8.4. Product Features
| Feature | Availability |
|---|---|
| Smart App | No |
| Front Light | Yes |
| Rear Light | Yes |
| Seat | Adjustable |
| Cruise Control | No |
| Braking System | Front and Rear Disc Brakes |
| Custom Stickers | Supported |
Note: Battery level, load, tire pressure, road conditions, chain, and tire lubrication can affect the maximum speed. The range is tested under the following conditions: 25°C, 60kg load, 15-20km/h speed, flat and hard road surface, from full charge to complete discharge, continuous testing. Driving habits, temperature, load, tire pressure, and road conditions can affect the range.
9. Warranty Information & Support
URLIFE provides a warranty for its E20 electric bicycle components as detailed below:
| Parts & Components | Warranty Period | Warranty Terms |
|---|---|---|
| Frame | 12 months | Covered: natural deformation, welding cracks, desoldering cracks, manufacturing defects. Not covered: self-modification, damage upon crash. |
| Battery | 12 months | Covered: poor contact, power failure, no power storage, capacity below 60%. Not covered: water ingression, artificial damage, poor maintenance (e.g., not charging for over a month). |
| Motor | 12 months | Covered: coil phase damage, demagnetization, detachment, axle deformation, noisy bearing, other quality defects. Not covered: damage caused by improper riding/operation, unauthorized alteration, artificial reasons. |
| Others | / | Please contact us upon damage. |
For the latest warranty information, please visit: https://urlifebike.com/pages/warranty
After-Sales Service Contact:
- Official Website: service@urlifebike.com
- Sales Channel: supportus@urlifebike.com / supporteu@urlifebike.com
A detailed user manual in PDF format is also available for download: URLIFE E20 User Manual (PDF).
10. User Tips
- Assembly: The assembly process for this e-bike is generally straightforward. Follow the instructions carefully, and refer to the video guide if needed.
- Battery Check: Upon receiving your e-bike, ensure the battery is charging correctly. If you encounter any issues with charging, contact customer support immediately.
- Customer Service: For any significant issues, consider purchasing from sellers known for robust customer service to ensure timely support.
11. Disclaimer
- The company reserves the right to modify and interpret the product models, specifications, or related information mentioned in this manual.
- The functions mentioned in this manual are specific to the mentioned models.
- The company will not notify users of any changes or modifications to the product models, specifications, or related information.
- Do not reproduce, modify, distribute, or publish the content of this manual without prior written permission from the company.
- Please read this manual carefully before using the product and follow the instructions. The company is not responsible for any product damage or personal or property loss caused by improper use.
- For more product information, please visit the official website: https://urlifebike.com/