Lemorele G96

Contents

Lemorele 4K HDMI Switch 5 In 1 Out User Manual

Model: G96

Thank you for choosing the Lemorele 4K HDMI Switch. This manual provides detailed instructions for setting up and operating your device. Please read it carefully before use.

1. Product Overview

The Lemorele 4K HDMI Switch allows you to connect up to five HDMI signal sources to a single HDMI display device. This enables seamless switching between various input sources, such as laptops, gaming consoles (PS5, Xbox Series X/S, Nintendo Switch), TV boxes, Blu-ray players, and more, sending the desired signals to your TV, monitor, or projector.

This switch supports high-definition video and multi-channel audio transmission, meeting the demands of modern audio-visual setups. It features video amplification to enhance and optimize transmitted signals, supporting a bandwidth of up to 10.2 Gbps.

Lemorele 4K HDMI Switch G96 with remote control
Lemorele 4K HDMI Switch G96 and its remote control.
Diagram showing 5 HDMI inputs and 1 HDMI output for the switch
The 5-in-1-out HDMI Switch connects multiple input devices to a single output display.

2. Package Contents

Please check the package for the following items:

  • HDMI Switch (G96) x 1
  • USB-C Power Cable x 1
  • Infrared Remote Control x 1
  • User Manual x 1
Video: Unboxing and connection demonstration of the Lemorele G96 HDMI Switch.

3. Setup Instructions

Follow these steps to connect your HDMI Switch:

  1. Power Supply: First, connect the provided USB-C power cable to the 'USB-C Power' port on the HDMI Switch and then to a 5V/2A USB power adapter (not included) or a compatible USB port.
  2. HDMI Input Connections: Connect your HDMI source devices (e.g., laptop, game console, Blu-ray player) to the HDMI IN 1, HDMI IN 2, HDMI IN 3, HDMI IN 4, and HDMI IN 5 ports on the switch using HDMI cables.
  3. HDMI Output Connection: Connect the 'HDMI OUT' port on the switch to your display device (e.g., TV, monitor, projector) using an HDMI cable.
Setup diagram showing various devices connected to the HDMI switch and a monitor
Example setup with multiple devices connected to the HDMI Switch.

Note:

  • Ensure all devices are powered off before making connections.
  • Use high-quality HDMI cables for optimal performance, especially for 4K resolutions.
  • The switch can automatically filter channels with no input signal.

4. Operating the HDMI Switch

You have two methods to switch between HDMI input sources:

4.1 Using the Infrared Remote Control

  1. Point the infrared remote control towards the front of the HDMI Switch.
  2. Press the corresponding number button (1, 2, 3, 4, or 5) on the remote control to switch to the desired HDMI input source.
  3. The signal indicator light on the switch will illuminate for the active input.

4.2 Using the Manual Switch Button

  1. Locate the 'Switch' button on the front panel of the HDMI Switch.
  2. Press the button repeatedly to cycle through the HDMI input sources (1 to 5).
  3. The signal indicator light on the switch will illuminate for the active input.
Image showing both IR remote control and manual button for switching inputs
Two convenient ways to switch between your HDMI sources.

5. Specifications

FeatureDescription
Model NumberG96
TypeHDMI Switch (5 In 1 Out)
Max Resolution4K@30Hz, 1080P@60Hz
HDMI VersionHDMI 2.0 Compatible
BandwidthUp to 10.2 Gbps
Power SupplyUSB-C 5V/2A
Dimensions (L x W x H)161 x 58 x 18 mm (6.3 x 2.3 x 0.7 inches)
Weight150g
CertificationCE

5.1 Transmission Distance & Cable Gauge

The performance of your HDMI connection can be affected by cable length and gauge. Please refer to the table below for recommended specifications:

Resolution4K@30Hz1080P@60Hz
Transmission Distance0.75 - 10 meters0.75 - 24 meters
Support Line LengthInputOutputInputOutput
0.75 - 5 meters0.75 - 5 meters0.75 - 12 meters0.75 - 12 meters
Warm Reminder: HDMI cable length and corresponding wire gauge must comply with the following table
Line Length0.75 - 3 meters5 - 10 meters12 - 15 meters20 meters
Wire Gauge30AWG28AWG26AWG24AWG
Table showing resolution, transmission distance, and recommended cable length and wire gauge
Detailed specifications for optimal performance based on cable length and gauge.

6. Troubleshooting

  • No Signal/Black Screen:
    • Ensure all HDMI cables are securely connected to both the switch and your devices.
    • Verify the HDMI Switch is receiving adequate power via the USB-C cable.
    • Try a different HDMI cable.
    • Ensure your display device is set to the correct HDMI input.
    • Test with a different input source or display device to isolate the issue.
  • Flickering/Poor Picture Quality:
    • Check the length and gauge of your HDMI cables against the specifications table in Section 5.1. Longer or thinner cables may degrade signal quality, especially for 4K resolutions.
    • Ensure your source device's resolution and refresh rate are supported by your display and the switch.
    • Try reducing the resolution or refresh rate of the source device.
  • Remote Control Not Working:
    • Ensure there are no obstructions between the remote and the switch's IR receiver.
    • Check if the remote control's battery needs replacement.
    • Make sure you are pointing the remote directly at the switch.

7. Maintenance

  • Keep the device in a cool, dry place, away from direct sunlight and heat sources.
  • Do not expose the device to water or excessive moisture.
  • Clean the device with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
  • Do not attempt to disassemble or repair the device yourself. This will void the warranty.

8. User Tips

  • For optimal remote control performance, ensure a clear line of sight between the remote and the switch's IR receiver. Precise aiming may be required.
  • Consider labeling your HDMI input cables (e.g., 'PS5', 'Laptop') to easily identify which input corresponds to which device when switching.
  • If you experience any issues, a simple power cycle (unplugging and replugging the power cable) can often resolve minor glitches.

9. Warranty and Support

This product comes with a standard manufacturer's warranty. For warranty claims, technical support, or further assistance, please contact your retailer or the manufacturer directly. Please retain your proof of purchase for warranty purposes.

For the most up-to-date information and additional resources, you may refer to the official user manual PDF: Lemorele G96 User Manual (PDF)


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.