AULA S100Pro

Contents

AULA S100Pro Wireless Mechanical Keyboard User Manual

Model: S100Pro

1. Introduction

Thank you for choosing the AULA S100Pro Wireless Mechanical Keyboard. This keyboard is designed for versatility and performance, featuring a three-mode connection (Wired, 2.4G Wireless, Bluetooth), hot-swappable switches, durable PBT keycaps, and a long-lasting 4000mAh battery. This manual will guide you through the setup, operation, and maintenance of your new keyboard.

AULA S100Pro keyboard in three color variations, highlighting its three-mode connection feature.
Figure 1: AULA S100Pro Mechanical Keyboard - Three-mode connection overview.

2. Setup and Connection

2.1 Package Contents

Ensure all items are present in the package:

  • AULA S100Pro Mechanical Keyboard
  • USB Type-C Cable
  • 2.4G Wireless Receiver
  • Keycap Puller (for hot-swapping)
  • Switch Puller (for hot-swapping)
  • User Manual (this document)

2.2 Connection Modes

The AULA S100Pro supports three connection modes: Wired (USB Type-C), 2.4G Wireless, and Bluetooth (BT). A switch on the keyboard allows you to select the desired mode.

Close-up of the keyboard's side, showing the Type-C port and a switch labeled BT, Wired, and 2.4G for mode selection.
Figure 2: Connection mode switch and Type-C port.

2.2.1 Wired Connection

  1. Locate the USB Type-C port on the keyboard.
  2. Connect the provided USB Type-C cable to the keyboard and the other end to an available USB port on your computer.
  3. Set the mode switch on the keyboard to "Wired".
  4. The keyboard will be automatically recognized by your system.

2.2.2 2.4G Wireless Connection

  1. Locate the 2.4G wireless receiver (USB dongle).
  2. Plug the 2.4G wireless receiver into an available USB port on your computer.
  3. Set the mode switch on the keyboard to "2.4G".
  4. The keyboard should connect automatically. If not, press Fn + R (or a similar key combination indicated in the quick start guide) to initiate pairing.

2.2.3 Bluetooth Connection

  1. Set the mode switch on the keyboard to "BT".
  2. On your device (computer, tablet, phone), enable Bluetooth and search for new devices.
  3. The keyboard should appear as "AULA S100Pro" or similar. Select it to pair.
  4. You may need to enter a code on the keyboard and press Enter to complete pairing.
  5. The keyboard can typically store multiple Bluetooth profiles (e.g., Fn+Q, Fn+W, Fn+E for different devices). Refer to the quick start guide for specific key combinations.

2.3 Adjustable Footrest

The keyboard features a double-section adjustable footrest, allowing you to set the typing angle to one of two heights for ergonomic comfort.

Diagram showing the keyboard's adjustable footrest with 'One section' and 'Two sections' height options.
Figure 3: Double-section adjustable footrest.

3. Operation

3.1 Backlight Control

The AULA S100Pro features regional mixed lighting. Use the Fn key in combination with other keys (usually arrow keys or dedicated lighting keys) to adjust brightness, change lighting effects, or turn the backlight on/off. Specific key combinations are typically found in the quick start guide.

Close-up of keyboard keys showing regional light mixing with various colors.
Figure 4: Regional light mixing on the keyboard.

3.2 Function Keys (Fn Combinations)

The keyboard utilizes an Fn key for various secondary functions. Common combinations include:

  • Fn + F1-F12: Multimedia controls, volume adjustment, etc.
  • Fn + (specific keys): Switching Bluetooth profiles (e.g., Fn+Q, Fn+W, Fn+E).
  • Fn + (specific keys): Backlight mode and brightness adjustments.

Refer to the quick start guide for a complete list of Fn key combinations.

4. Maintenance

4.1 Cleaning

  • Keycaps: The PBT keycaps are durable and resistant to oiling. Use a soft, damp cloth with mild soap and water to clean them. For deeper cleaning, use the provided keycap puller to remove them and clean individually.
  • Keyboard Body: Wipe the keyboard body with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
  • Between Keys: Use compressed air to remove dust and debris from between the keycaps and switches.

4.2 Hot-Swappable Switches

The AULA S100Pro features a full key shaft base that is hot-swappable, allowing you to easily change switches without soldering. This extends the keyboard's life and allows for customization of typing feel.

Close-up of keyboard switches being removed with a switch puller, demonstrating the hot-swappable feature.
Figure 5: Hot-swappable switch replacement.
  1. Power off the keyboard or disconnect it from your device.
  2. Use the keycap puller to gently remove the desired keycap.
  3. Use the switch puller to carefully grip the switch and pull it straight up.
  4. Align the pins of the new switch with the holes on the PCB and press down firmly until it clicks into place. Ensure pins are not bent.
  5. Replace the keycap.

5. Troubleshooting

5.1 Keyboard Not Responding

  • Wired Mode: Ensure the USB Type-C cable is securely connected to both the keyboard and the computer. Check if the mode switch is set to "Wired". Try a different USB port or cable.
  • 2.4G Wireless Mode: Ensure the 2.4G receiver is plugged in and the mode switch is set to "2.4G". Try re-pairing by pressing Fn + R (or as per quick start guide). Ensure the keyboard battery is charged.
  • Bluetooth Mode: Ensure Bluetooth is enabled on your device and the mode switch is set to "BT". Re-pair the keyboard if necessary. Ensure the keyboard battery is charged.

5.2 Keys Not Working or Double-Typing

  • This could indicate a faulty switch. Utilize the hot-swappable feature to replace the problematic switch.
  • Ensure the switch is fully seated in the PCB.
  • Clean any debris around the switch.

5.3 Backlight Not Working

  • Ensure the keyboard battery is sufficiently charged.
  • Check backlight settings using Fn key combinations (e.g., brightness adjustment).

5.4 Battery Life Issues

  • Ensure the keyboard is fully charged using the provided Type-C cable.
  • Reduce backlight brightness or turn it off to conserve battery.
  • The keyboard has a 4000mAh battery, providing approximately 32 hours with default lighting effects and up to 132 hours with lighting off.

6. Specifications

Below are the detailed specifications for the AULA S100Pro Mechanical Keyboard:

FeatureSpecification
ModelS100Pro
Layout98% layout, 99 keys
Connection ModeThree-mode (Wired Type-C + Bluetooth + 2.4G Wireless)
Keycup PrintingDoublshot
Keycup MaterialPBT plastic (two-color PBT spherical keycap)
Switches Hot SwapYes (full-key hot-swappable)
Backlight TypeMULTICOLOR (regional mixed light)
Full Size KeyboardYes
Wrist SupportNo
Interface TypeUSB, Type-C, Bluetooth
Battery IncludedYes
Operation StyleMechanical
Keyboard Standard100 Keys
ApplicationDesktop, Laptop, Number, Tablet
Type2.4Ghz Wireless
OriginMainland China
CertificationCE, FCC, RoHS
Product Size369.96 (L) × 126.56 (W) × 40.65 (H) ±0.5mm
Product WeightAbout 928g (without cables/receiver) / About 973g (with cables/receiver)
Rated VoltageDC 3.7V (Full 4.2V)
Battery Capacity4000mAh
Charging Voltage/CurrentDC 5V / 500mA
Rated Current≤ 125mA @3.7V (default lighting effect) / ≤ 30mA (backlight and sidelight off)
Battery LifeAbout 32 hours (default lighting effect) / About 132 hours (backlight and side lights off)
Operating SystemWIN XP/7/8/10/Android/iOS/MAC
Table showing detailed product parameters for the S100Pro keyboard, including dimensions, weight, battery, and operating systems.
Figure 6: S100Pro Product Parameter Table.
Table comparing specifications of AULA S100Pro and S100 models, including layout, connection, switch, keycap, and lighting.
Figure 7: Product Version Comparison (S100Pro vs S100).

7. User Tips

  • Battery Management: To maximize wireless usage, remember to fully charge the keyboard. The 4000mAh battery provides significant usage time, but turning off the backlight when not needed can extend it further.
  • Connection Versatility: Take advantage of the three connection modes. Use wired for competitive gaming or when charging, 2.4G wireless for a stable, low-latency wireless experience, and Bluetooth for connecting to multiple devices like tablets or phones.
  • Customization: The hot-swappable switches allow for easy customization. Experiment with different switch types to find your preferred typing feel without needing to buy a new keyboard.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official AULA website or contact the seller directly. Keep your proof of purchase for warranty claims.

A PDF version of this user manual is available for download: User Manual (PDF)

9. Video Demonstration

Watch a demonstration of the AULA S100Pro keyboard's typing sound and feel:

Video 1: AULA S100Pro Mechanical Keyboard Typing Sound Test.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.