1. Introduction
Thank you for choosing the MLMZYML Q39 Pro Wireless Headphones. These true wireless earbuds are designed to provide an immersive audio experience with smart convenience. Featuring Bluetooth 5.4 for stable, low-latency connectivity, an LED power display for easy battery monitoring, and active noise cancellation for clear sound. Their ergonomic ear-hook design ensures a secure fit for sports and daily activities, complemented by IPX4 water resistance. Enjoy high-fidelity stereo sound, long-lasting battery life, one-step pairing, and intuitive touch controls. This manual will guide you through the setup, operation, and maintenance of your new headphones.

2. Safety Information & FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
3. Product Overview
3.1 Package Contents
- 1x Pair of Q39 Pro Wireless Headphones
- 1x Charging Case
- 1x Instruction Manual
- 1x Charging Cable
3.2 Key Description (Touch Controls)
- Power On: Take earphones out of the charging case (automatic power on and pairing), or long press the touch button for 3-5 seconds.
- Power Off: Put earphones in the charging case (automatic shut down), or long press the touch button for 3-5 seconds.
- Play/Pause: During playback, click the touch button on one earphone to pause; click again to resume.
- Answer/Hang Up Call: When an incoming call, click the touch button on one earphone to answer; click again to hang up.
- Reject Call: When an incoming call, long press the earphone touch button for 2-3 seconds.
- Previous/Next Song: Double-click the touch button.
- Adjust Volume: Triple-click the touch button.

4. Setup and Pairing
4.1 Initial Power On and Pairing
- Take both earphones out of the charging case simultaneously.
- The earphones will automatically power on and begin pairing.
- Wait for 5 to 30 seconds. When one earphone flashes continuously and the other is off, pairing is successful.
- Turn on the wireless (Bluetooth) function on your phone, search for the corresponding earphone device name (e.g., "Q39 Pro"), and connect.
4.2 Troubleshooting Pairing Issues
Single-Ear Connection Problem (One earphone mute):
- Put both earphones back into the charging case simultaneously.
- Wait a few seconds, then take them out again.
- Wait for 5 to 30 seconds.
- Turn on your phone's wireless function, find the previously paired device, and unpair it.
- Turn off your phone's wireless function, then turn it back on.
- Search for the earphone device again and connect.
Phone Cannot Find Earphone Device:
- Put both earphones back into the charging case simultaneously.
- Wait a few seconds, then take them out again.
- Wait for 5 to 30 seconds.
- Turn on your phone's wireless function, search for the corresponding earphone device, and connect.
5. Operating Instructions
Refer to the "Key Description" in Section 3.2 for detailed touch control functions.
5.1 Music Playback
- Play/Pause: Click the touch button on either earphone.
- Next Song: Double-click the touch button on the right earphone.
- Previous Song: Double-click the touch button on the left earphone.
- Volume Up: Triple-click the touch button on the right earphone.
- Volume Down: Triple-click the touch button on the left earphone.
5.2 Call Management
- Answer Call: Click the touch button on either earphone.
- Hang Up Call: Click the touch button on either earphone during a call.
- Reject Call: Long press the touch button on either earphone for 2-3 seconds when an incoming call.
5.3 Memory Card Playback
The Q39 Pro headphones are fully compatible with memory cards for direct playback. Insert a memory card into the designated slot on the charging case. You can confidently download and listen to music even when the battery is low or without a connected device.


6. Maintenance
- Cleaning: Regularly wipe the earphones and charging case with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Storage: When not in use, store the earphones in their charging case to protect them from dust and damage.
- Charging: Use the provided charging cable and a compatible power adapter. Avoid overcharging or leaving the earphones uncharged for extended periods.
- Water Resistance: The earphones are IPX4 water-resistant, meaning they can withstand splashes and sweat. Do not submerge them in water or expose them to heavy rain.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Earphones not powering on | Low battery; not removed from case correctly. | Charge the earphones. Ensure both are removed from the case simultaneously. Long press touch button for 3-5 seconds. |
| Only one earphone connects (single-ear mute) | Pairing issue; incorrect connection sequence. | Place both earphones back in the charging case for a few seconds, then remove them. Wait 5-30 seconds. Unpair from phone, turn Bluetooth off/on, then search and reconnect. |
| Phone cannot find earphones | Earphones not in pairing mode; Bluetooth interference. | Place both earphones back in the charging case for a few seconds, then remove them. Wait 5-30 seconds. Ensure phone's Bluetooth is on and search again. |
| Intermittent connection | Distance from device; interference; low earphone battery. | Keep earphones close to your device. Avoid environments with strong wireless interference. Ensure earphones are charged. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand Name | MLMZYML |
| Model | Q39 Pro |
| Style | Ows ear hook headphones |
| Communication | Wireless (Bluetooth 5.4) |
| Wireless Type | Bluetooth |
| Active Noise-Cancellation | Yes (ENC Call Noise Reduction) |
| Volume Control | Yes |
| Vocalism Principle | Dynamic |
| Material | PVC, ABS |
| Category | Earphones & Headphones |
| Origin | Mainland China |
| Water Resistance | IPX4 (from product description) |
| Memory Card Support | Yes (from product description) |
9. User Tips
- For optimal sound quality, ensure the earphones are properly seated in your ears. The ear-hook design is meant for a secure fit, especially during movement.
- If experiencing audio drops or connection instability, try resetting the earphones by placing them back in the charging case for a few seconds, then taking them out again to re-establish the connection.
- Keep the charging case and earphones clean to ensure proper charging contacts and touch control responsiveness.
- The LED display on the charging case provides a quick visual of battery levels for both the case and individual earbuds, so check it regularly to avoid unexpected power loss.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official product documentation or contact the seller directly.
A detailed user manual in PDF format is also available for download: User Manual (PDF).