1. Introduction
Thank you for choosing the UGREEN 40Gbps Dual-Bay M.2 NVMe SSD Cloner. This device is designed for ultra-fast data transfers, efficient SSD cloning, and flexible storage management with support for various RAID modes. Please read this manual carefully to ensure proper use and optimal performance of your device.

Figure 1: UGREEN Dual-Bay M.2 NVMe SSD Cloner
2. Key Features
- Blazing 40Gbps Speed: Utilizes USB4 technology for ultra-fast data transfers, reaching speeds up to 3700MB/s, ideal for large files and demanding tasks.
- Dual NVMe Slots & Clone Function: Features two M.2 NVMe SSD slots for storage expansion and a one-touch copy feature for easy drive duplication.
- Extreme Heat Dissipation: Designed with an aluminum alloy cover and an integrated cooling fan to maintain optimal operating temperatures and stability during heavy use.
- Wide Compatibility: Supports various M.2 NVMe SSD sizes (2280/2260/2242/2230) and is compatible with major brands like Crucial, WD, and Kingston.
- RAID Support: Offers multiple use cases including RAID 0 (Rapid mode for ultra-fast transmission), RAID 1 (Safety mode for secure data storage), PM mode (Normal mode for easy expansion), and Union Mode (for capacity expansion).
3. Package Contents
Please check the package contents upon unboxing:
- UGREEN 40Gbps Dual-Bay M.2 NVMe SSD Cloner
- USB-C to USB-C Cable
- Power Adapter
- User Manual (this document)
4. Setup Instructions
4.1 Installing M.2 NVMe SSDs
- Gently slide open the enclosure cover to access the SSD slots.
- Insert your M.2 NVMe SSD(s) into the designated slots (Source and Target). Ensure the SSDs are compatible with M Key or M&B Key NVMe/PCIe interfaces.
- Secure the SSD(s) in place using the provided fasteners or clips.
- Close the enclosure cover securely.

Figure 2: M.2 SSD Installation and Compatibility (2230, 2242, 2260, 2280 sizes)
4.2 Connecting to a Host Device
- Connect the provided USB-C to USB-C cable from the enclosure to your computer or host device.
- Connect the power adapter to the enclosure and plug it into a power outlet. The device requires external power for operation.
- The enclosure is compatible with Windows, Mac OS, and Linux operating systems.

Figure 3: Wide Compatibility with various operating systems and devices
5. Operating Instructions
5.1 Data Transfer Mode
When connected to a host device, the SSDs in the enclosure will appear as external drives. You can transfer data at speeds up to 40Gbps (USB4) depending on your host device's capabilities.

Figure 4: High-Speed Data Transmission
5.2 One-Key Offline Clone Function
The enclosure supports offline cloning, allowing you to duplicate an SSD without connecting to a computer.
- Ensure both Source (A) and Target (B) M.2 NVMe SSDs are correctly installed in their respective slots.
- Important: The capacity of the Target drive (B) must be equal to or greater than the Source drive (A). The Target disk will be formatted during the cloning process, so back up any important data on the Target disk beforehand.
- Disconnect the enclosure from any host computer.
- Press and hold the "Clone" button (usually a physical button on the device) for a few seconds until the LED indicators start to flash, indicating the cloning process has begun.
- Monitor the LED indicators for cloning progress. Once complete, the indicators will show a steady light or turn off.

Figure 5: One-Click Offline Copy Operation
5.3 RAID Modes
The enclosure supports various RAID configurations for enhanced performance or data redundancy.
- RAID 0 (Rapid Mode): Combines two SSDs into a single logical unit for ultra-fast transmission, ideal for professional video editing and large-scale video games.
- RAID 1 (Safety Mode): Mirrors data across two SSDs, providing a secure environment with multiple backups for critical data.
- PM Mode (Normal Mode): Presents each SSD as an independent drive, easily expandable by adding or removing SSDs flexibly.
- Union Mode (Capacity Expansion): Combines the capacities of multiple hard disks to store large amounts of data.
Refer to the detailed PDF manual for specific instructions on how to configure RAID modes.

Figure 6: Multiple Use Cases and RAID Modes
6. LED Indicator Status
The LED indicator provides visual feedback on the device's status:
- White light flashing: Device read/write is normal.
- Red light flashing: Read exception or error.
- White light flashing (during cloning): Indicates cloning in progress.

Figure 7: LED Indicator Guide
7. Maintenance
- Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
- Ensure proper ventilation around the enclosure, especially during prolonged use, to aid the cooling fan.
- Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
- Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.

Figure 8: Extreme Heat Dissipation System
8. Troubleshooting
- Device not recognized:
- Ensure all cables are securely connected.
- Verify the power adapter is connected and receiving power.
- Try connecting to a different USB port or computer.
- Check if the M.2 NVMe SSDs are properly seated in their slots.
- Slow transfer speeds:
- Ensure your host device supports USB4 (40Gbps) for maximum speed.
- Check the quality of your USB-C cable; use the provided cable or a certified USB4 cable.
- Verify the performance of your M.2 NVMe SSDs.
- Cloning fails or errors:
- Ensure the Target SSD's capacity is equal to or greater than the Source SSD's capacity.
- Make sure the enclosure is disconnected from any computer during offline cloning.
- Check the LED indicator for error codes (red flashing).
- Ensure both SSDs are healthy and free of errors.
- Overheating:
- Ensure the cooling fan is operating.
- Provide adequate ventilation around the device.
- Reduce heavy workloads if overheating persists.
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | CM847-65733 |
| Interface Type | M.2 (M Key) NVMe/PCIe |
| Data Transfer Speed | Up to 40Gbps (USB4) |
| SSD Compatibility | M.2 NVMe SSDs (2230, 2242, 2260, 2280). Does NOT support NGFF SSD. |
| Max Capacity | Up to 16TB (8TB per slot) |
| Cloning Function | One-key offline clone (Target capacity ≥ Source capacity) |
| RAID Modes | RAID 0, RAID 1, PM, Union Mode |
| Cooling System | Aluminum alloy cover, built-in cooling fan, thermal pad |
| Operating System Compatibility | Windows, Mac OS, Linux |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 15cm x 10cm x 8cm |
| Package Weight | 1.0 kg |

Figure 9: Large Capacity Support (up to 16TB)
10. User Tips
- For optimal performance, ensure your M.2 NVMe SSDs are high-quality and compatible with the enclosure's specifications.
- Always back up critical data before performing any cloning operations.
- When using RAID modes, understand the implications of each mode on data redundancy and performance.
- Keep the firmware of your SSDs and the enclosure updated for best compatibility and performance.
11. Warranty and Support
UGREEN products come with a standard warranty. For detailed warranty information, technical support, or service inquiries, please visit the official UGREEN website or contact their customer service.
An additional user manual in PDF format with more detailed instructions and diagrams can be found here: UGREEN SSD Cloner User Manual (PDF).
12. Safety Information
- Do not expose the device to water or moisture.
- Avoid dropping or subjecting the device to strong impacts.
- Keep out of reach of children.
- Use only the provided power adapter and cables.