1. Introduction
The MYAMi MY-MPPT1200G Solar Charge Controller is an advanced Maximum Power Point Tracking (MPPT) device designed for efficient charging of various battery types, particularly in electric vehicle charging applications. It features intelligent control, multiple protection mechanisms, and a user-friendly full-color LCD display to ensure optimal performance and safety.
This manual provides essential information for the proper installation, operation, and maintenance of your solar charge controller. Please read it thoroughly before use.
2. Key Features
- Lithium Battery Activation: Comes with a function to activate lithium batteries.
- Intelligent Multiple Protection: Includes overcharge protection (OVP), over-temperature protection (OTP), over-current protection (OCP), and over-power protection (OPP).
- Intelligent Control Charging: Optimizes charging process for various battery types.
- Intelligent Temperature-Controlled Fan: The cooling fan activates when the internal temperature exceeds 45°C and turns off when it drops below 40°C, ensuring optimal operating temperature.
- Full-Color Multifunctional LCD Display: Provides clear and intuitive display of operating data and charging status.
- High Efficiency Boost: MPPT technology offers a tracking and conversion efficiency of 97%-99%.
- Wide Photovoltaic Input Voltage: Supports PV input voltage from 12V to 60V.
- Multi-Battery Type Charging: Compatible with Lead acid, Gel, Phosphate, and Ternary batteries, supporting adjustable 48V, 60V, and 72V battery systems.
- High-Precision Battery Voltage Monitoring: Built-in function to prevent battery overcharging.
- Upgraded MC4 Photovoltaic Connectors: Features high-strength PPO flame-retardant insulating shell, waterproof and dustproof design, and a tin-plated copper inner core for enhanced safety and convenience.

Figure 1: Controller with its 6 major advantages listed.

Figure 2: Upgraded MC4 Photovoltaic Connectors for secure and safe connections.
3. Package Contents
Upon opening the package, please verify that all items listed below are present and in good condition:
- MYAMi MPPT Solar Charge Controller (Main Unit)
- Instruction Manual (1 pc)
- Fuse Plug (2 pcs)

Figure 3: Standard package contents.
4. Setup and Installation
Before installation, ensure the controller is placed in a well-ventilated area, away from direct sunlight, high temperatures, and moisture. The controller is designed to be compact and lightweight for easy integration.
4.1 Physical Installation
- Mount the controller securely using the integrated mounting tabs. Ensure there is sufficient space around the unit for proper airflow, especially for the intelligent temperature-controlled fan.
- Note the dimensions: 17cm (length) x 6cm (width) x 9.5cm (height). The unit weighs approximately 0.7kg.

Figure 4: Controller dimensions and connection overview.
4.2 Wiring Connections
Follow these steps carefully to connect the solar charge controller. Incorrect wiring can damage the controller, battery, or solar panels.
- Connect to Battery: Connect the positive (red) and negative (black) cables from your battery bank to the corresponding battery terminals on the controller. Ensure a secure connection. The controller supports adjustable battery voltages of 48V, 60V, and 72V.
- Connect to Solar Panels: Connect the positive (red) and negative (black) cables from your solar panels to the corresponding PV input terminals on the controller. The PV input voltage range is 12-60V. Use the upgraded MC4 photovoltaic connectors for a reliable connection.
- Verify Connections: Double-check all connections for correct polarity and tightness before proceeding.

Figure 5: Controller terminals for battery and solar panel connections.
Video 1: Demonstration of the Boost MPPT Solar Charge Controller in an electric tricycle charging setup, showing PV input (12-60V), adjustable battery voltage (48V, 60V, 72V), and charging current (15A/8A).
5. Operating Instructions
5.1 Power On and Display
Once correctly wired, the controller will power on automatically. The full-color LCD display will show real-time operating data. The display automatically alternates between battery level and power generation information.

Figure 6: HD LCD Color Screen Display with indicators for Photovoltaic voltage, Charging current, Charging voltage, Charging power, Cumulative power generation capacity, Battery state, Controller temperature, Charging state, Set status lock, and Fully charged state.
5.2 Setting Battery Voltage
The controller allows for adjustable battery voltage settings (48V, 60V, 72V). Use the 'Set' button on the front panel to cycle through and select the appropriate battery voltage for your system. Refer to the detailed instructions in the User Manual (PDF) for specific steps on adjusting this setting.
5.3 Charging Process
The controller utilizes MPPT technology to maximize power harvest from your solar panels, converting it into efficient charging current for your battery. The charging current can be up to 15A for the 1200W model or 8A for the 600W model (if applicable). The intelligent temperature-controlled fan will operate as needed to maintain optimal internal temperatures during charging.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your solar charge controller.
- Cleaning: Periodically clean the exterior of the controller to remove dust and debris. Ensure the fan vents are clear for proper cooling. Use a soft, dry cloth.
- Connection Check: Regularly inspect all wiring connections (battery and solar panel) to ensure they are tight and free from corrosion. Loose connections can lead to power loss or overheating.
- Fuse Replacement: The controller includes replacement fuses. If the controller stops functioning, check the fuses located near the battery connection terminals. Replace blown fuses with ones of the same rating.
- Environmental Conditions: Ensure the controller remains in a dry, well-ventilated environment within its specified operating temperature range.
7. Troubleshooting
If you encounter issues with your solar charge controller, refer to the following common problems and solutions:
- Controller Not Powering On:
- Check battery connections for proper polarity and tightness.
- Verify battery voltage is within the supported range (48V, 60V, 72V).
- Check the fuses. Replace if blown.
- No Charging Current:
- Ensure solar panels are receiving adequate sunlight.
- Check PV input wiring for correct polarity and secure connections.
- Verify PV input voltage is within the 12-60V range.
- Check if the battery is already fully charged.
- Overcharge Protection (OVP) Activated:
- The controller has detected that the battery voltage has exceeded a safe limit. It will stop charging to protect the battery.
- Ensure the correct battery type and voltage are selected in the controller settings.
- Over-Temperature Protection (OTP) Activated:
- The controller's internal temperature is too high. Ensure adequate ventilation and clear any obstructions from the fan.
- The fan should activate above 45°C. If it's not, check for fan malfunction.
- Over-Current Protection (OCP) / Over-Power Protection (OPP) Activated:
- The charging current or power has exceeded safe limits. This could be due to an oversized solar array or a fault in the system.
- Verify your solar panel array's specifications match the controller's maximum input capabilities.
For persistent issues, please consult the full User Manual (PDF) or contact customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | MY-MPPT1200G |
| Product Name | Boost MPPT Solar Charge Controller |
| Application | Solar Working Station, Lighting Controller, Solar System Controller, Voltage Controller, Charger Controller |
| Maximum Current | 30A |
| Charging Current | 15 A |
| MPPT Efficiency | 97%-99% |
| Battery Type | Lead acid/Gel/Phosphate/Ternary battery |
| Battery Voltage | Adjustable 48V, 60V, 72V |
| PV Input Voltage | 12-60V |
| Display | LCD Display (Full-color) |
| Protection | OCP/OLP/SCP/OTP (Over-Current, Over-Load, Short-Circuit, Over-Temperature Protection) |
| Is Smart Device | Yes |
| Color | Green |
| Weight | 0.7KG |
| Size (L*W*H) | 17*6*9.5cm |
| Origin | Mainland China |
9. User Tips
- Always ensure that the solar panel voltage (PV input) is within the specified range (12-60V) to prevent damage to the controller.
- Match the controller's output voltage setting to your battery bank's nominal voltage (48V, 60V, or 72V) for safe and efficient charging.
- For optimal performance and to prevent overheating, ensure the controller is installed in a location with good air circulation. The intelligent fan will assist, but proper ambient conditions are crucial.
- Use appropriate gauge wiring for all connections to minimize voltage drop and ensure safety.
10. Warranty and Support
For specific warranty information and technical support, please refer to the official MYAMi documentation or contact the seller directly. Keep your purchase receipt for warranty claims.
A detailed User Manual is available in PDF format for further reference: Download User Manual (PDF).