1. Introduction
The Beitian BT-3707A is a high-precision aviation-type GNSS antenna designed for full-band, high-gain RTK differential measurement and mapping applications. It supports multiple satellite navigation systems including BDS, GPS, GLONASS, GALILEO, and QZSS, providing centimeter-level positioning accuracy and stable tracking in complex environments. Its robust design and strong anti-interference performance make it suitable for a wide range of professional uses.




2. Specifications
The Beitian BT-3707A antenna offers robust performance for demanding GNSS applications. Key parameters are detailed below:

2.1. General Parameters
- Model: BT-3707A
- Type: GNSS
- IS It With PCB: Yes
- Origin: Mainland China
- GPS Type: Receiver & Antenna
2.2. Antenna Characteristics
- Frequency Range:
- BDS: B1I, B2I, B3I
- GPS: L1C/A, L2P (Y)/L2C, L5
- GLONASS: L1, L2
- GALILEO: E1, E5A, E5B
- QZSS: L1, L2, L5
- Polarization Method: Right-hand circular polarization
- Horizontal Coverage Angle: 360°
- Output Impedance: 50Ω
- VSWR: ≤2.0
- Axial Ratio: ≤3dB
2.3. Electrical Characteristics
- LNA Gain: 35±2dB
- Noise Figure: ≤1.5dB
- Gain Flatness: ±1dB
- P1dB: 0dBm
- Operating Voltage: 3.0V-18.0V
- Operating Current: ≤45mA
2.4. Structural Characteristics
- Connector: SMA-K
- Antenna Size: Φ90*25.5mm (excluding connectors)
- Weight: 130g
- Installation Method: Screw fixing
- Shell Material: Aluminum alloy
- Radome Material: PC
2.5. Environmental Characteristics
- Working Temperature: -40℃ to +85℃
- Storage Temperature: -40℃ to +85℃
- Humidity: 95% non-condensing
- Waterproof Grade: IP67
3. Setup and Installation
The BT-3707A antenna is designed for easy and convenient installation using screw fixing. Follow these steps for proper setup:
- Choose a Mounting Location: Select a clear, unobstructed location with a direct view of the sky to ensure optimal satellite signal reception. Avoid areas with potential signal interference from other electronic devices or large metallic structures.
- Prepare the Mounting Surface: Ensure the mounting surface is flat and stable. The antenna features a circular base with four screw holes for secure attachment.
- Secure the Antenna: Use appropriate screws (not included) to firmly attach the antenna to the chosen surface through the designated screw holes on the aluminum alloy base.
- Connect the Cable: Connect a compatible SMA-K cable (not included) to the antenna's connector. Ensure the connection is tight and secure to prevent signal loss and maintain the IP67 waterproof rating.
- Connect to RTK Module: Route the cable to your RTK positioning module and connect it to the appropriate GNSS antenna input.
- Verify Connection: Before operation, visually inspect all connections to ensure they are secure and free from damage.
The compact size and light weight of the antenna make it suitable for various application scenarios, including UAVs, unmanned ships, agricultural machinery, and driverless cars.
4. Operating Instructions
Once the BT-3707A GNSS antenna is correctly installed and connected to your RTK positioning module, its operation is largely automatic. The antenna functions as a passive receiver, capturing satellite signals for your connected device.
- Power On Your RTK Module: Ensure your RTK positioning module or GNSS receiver is powered on according to its own operating instructions. The antenna draws power (3.0V-18.0V) from the connected device via the coaxial cable.
- Initiate Signal Acquisition: Your RTK module will automatically begin acquiring satellite signals from the supported constellations (BDS, GPS, GLONASS, GALILEO, QZSS).
- Monitor Signal Status: Refer to your RTK module's software or display for signal strength, satellite lock, and positioning status. The high-gain (35±2dB) and strong anti-interference performance of the BT-3707A antenna contribute to stable tracking even in complex environments.
- Begin Positioning/Measurement: Once sufficient satellite signals are acquired and a fix is established, your RTK module can perform centimeter-level positioning and differential measurements.
The antenna is designed to adapt to various mainstream RTK positioning modules, including those from Trimble, NovAtel, ComNav, Unicore, South, CHCNAV, Hi-Target, Zhonghai Da, and Foshan.
5. Maintenance
The Beitian BT-3707A GNSS antenna is built for durability and requires minimal maintenance. Adhering to these guidelines will help ensure its longevity and optimal performance:
- Regular Cleaning: Periodically clean the radome (PC material) with a soft, damp cloth to remove dust, dirt, or debris that might accumulate and potentially obstruct signal reception. Avoid abrasive cleaners or solvents.
- Inspect Connections: Regularly check the SMA-K connector and cable for any signs of wear, corrosion, or damage. Ensure the connection remains tight and secure.
- Environmental Protection: While the antenna has an IP67 waterproof rating, prolonged exposure to extreme conditions (e.g., direct saltwater spray, harsh chemicals) should be minimized if possible.
- Storage: When not in use for extended periods, store the antenna in a clean, dry environment within the specified storage temperature range of -40℃ to +85℃.
- Avoid Physical Damage: Protect the antenna from physical impacts or excessive force, which could damage the internal components or the aluminum alloy shell.
6. Troubleshooting
If you encounter issues with your BT-3707A GNSS antenna, consider the following troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| No satellite signal / Poor signal strength |
|
|
| Inaccurate positioning |
|
|
| Antenna not powering on (if applicable to module) |
|
|
7. User Tips
While no specific user tips were available from reviews or Q&A for this product, general best practices for GNSS antennas include:
- Optimal Placement: Always aim for the highest possible mounting point with the clearest 360-degree view of the sky to maximize satellite visibility and minimize signal blockages.
- Cable Management: Use high-quality coaxial cables of appropriate length and ensure they are properly secured and protected from environmental damage or sharp bends.
- Interference Avoidance: Keep the antenna away from other transmitting devices, high-power electronics, or large metallic objects that can cause electromagnetic interference or signal reflections (multipath).
- Firmware Updates: Regularly check for firmware updates for your connected RTK module, as these can often improve signal processing and positioning accuracy.
8. Warranty and Support
For warranty information, technical support, or service inquiries regarding your Beitian BT-3707A GNSS antenna, please contact the seller or the official Beitian customer service directly. Ensure you have your purchase details and the product's serial number (found on the bottom of the antenna) ready when contacting support.