1. Important Safety Instructions
SAVE THESE INSTRUCTIONS. For household use only. For indoor use only.
WARNING
To avoid fire, electric shock, or injury, observe the following points:
- For EU Market - This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- For non-EU markets - This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Use the appliance only indoors, on non-carpeted floor surfaces such as vinyl, tile, sealed wood, etc. Do not vacuum over loose objects or carpet edges. Stalling the brush can lead to premature belt failure.
- Do not allow to be used as a toy. Close attention is necessary when used by or near children, pets, or plants.
- Use only as described in this manual. Use only manufacturer’s recommended attachments.
- Do not use with damaged cord or plug. If appliance has been dropped, damaged, left outdoors, dropped into water, or is not working as it should, return it to a service center.
- Do not handle charger, including charger plug, and charger terminals with wet hands.
- Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
- Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
- Use extra care when cleaning on stairs.
- Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
- Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
- Do not use without filter in place.
- Prevent unintentional starting. Ensure the switch is in the off-position before picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliance that has the switch on invites accidents.
- Disconnect the battery pack from the appliance before making any adjustments, changing accessories, or storing appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally.
- Recharge only with the charger specified by Tineco. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
- Use appliances only with specifically designated Tineco battery packs. Use of any other battery packs may create a risk of injury and fire.
- When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
- Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
- Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
- Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130 °C (265 °F) may cause explosion.
- Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
- Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
- Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care.
- Always turn off the appliance before connecting or disconnecting the motorized nozzle.
- Do not charge or store the appliance outdoors or in the car. Only charge, store or use the battery in a dry indoor area where the temperature is higher than 4 °C (39.2 °F) but lower than 40 °C (104 °F). The charger is for indoor use only.
- Do not pick up ultrafine particles such as lime, cement, sawdust, gypsum powder, or ash.
- Do not use to pick up sharp objects such as metal nails, glass pieces, paper clips, or pins.
- Do not use to pick up hazardous materials and chemicals, such as solvents, drain cleaners, strong acids, or strong bases.
- Stop operation immediately if the appliance overheats, makes unusual noises, produces unusual odors, has low suction, or leaks electricity.
- Turn off the vacuum cleaner and unplug it for long-term storage.
- Clean the dirty water tank after each use to avoid possible blockages, which can lead to low suction, motor overheating, or reduced appliance lifespan.
- Store in a dry place after use.
- Do not place or immerse the appliance in standing water, and do not clean flooded areas.
- All data and technical instructions in this manual are based on laboratory test results from Tineco or third parties. The company reserves all rights for final explanations.
- Always unplug the appliance before cleaning or maintenance.
- Rolling over the power cord with the appliance can be dangerous.
- Do not use the appliance if the water depth is more than 5 mm above the surface.
- Do not unplug by pulling on the cable. To unplug, grasp the plug, not the cable.
- To avoid fire and electric shock – Use only Tineco cleaning products intended for use with this appliance.
- Do not leave the appliance plugged in unattended. Unplug after use and before cleaning.
- The operating instructions for the appliance with liquid dispensing system specify the quantity and type of liquid to be used.
- Do not direct liquid or steam at equipment containing electrical components, such as the inside of an oven.
- If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid hazards.
Cleaning Solution Information
- WARNING – To reduce the risk of fire and electric shock, use only the Tineco cleaning solution intended for this appliance.
- A large amount of cleaning solution entering the motor can damage the appliance.
- Fill the solution according to the instructions in the “Operation” section. We recommend using the provided cleaning solution. Do not use the product with acidic, alkaline solutions, or other environmentally harmful substances.
- Keep out of reach of children. Avoid contact with eyes and skin; if contact occurs, rinse thoroughly with water. If irritation persists, seek medical attention. If swallowed, seek medical attention.
- Disposal of dirty water and solution must comply with local environmental regulations.
Appliance Information
- Do not attempt to repair or modify the appliance other than as instructed in the operation and maintenance guidelines.
- The appliance must only be operated with the supplied power adapter. Always unplug the appliance before cleaning or maintenance.
- Use extra care when cleaning on stairs.
- Ensure the switch is in the off position before lifting or carrying the appliance. Do not lay the appliance flat or tilt it to prevent dirty water from entering the motor.
- To avoid accidental activation, please place the appliance on the charging dock.
- Always properly insert the dirty water tank and clean water tank before use.
- Do not allow the appliance or charging station to get wet to avoid fire and short-circuit injuries.
- WARNING: To recharge the battery, use only the charger supplied with this appliance.
Drying and Charging Dock Notes
WARNING
Do not immerse in water.
CAUTION
Hot surface. Avoid contact during use.
2. Product Overview

Main Unit and Components
- Self-cleaning button
- Mode button
- ThermoBlast button
- ChromaGlow Display
- Dirty Water Tank Release
- Dirty Water Tank Handle
- Clean Water Inlet
- DustReveal Green LED
- ThermoBlast Outlet
- Mute/Voice Switch Button
- Power On/Off
- Handle/Tube
- Dirty Water Tank (DWT)
- Clean Water Tank (CWT)
- Clean Water Tank Release
- Brush Roller
- Deodorizing and Cleaning Solution
- Cleaning Tool
- Dry Filter
- Drying and Charging Dock
3. Specifications
| Feature | Specification |
|---|---|
| Product Model | FLOOR ONE S9 MASTER SERIES |
| Voltage | 25.2 V 3900 mAh Li-Ion |
| Rated Power | 450 W |
| Charging Time | 4 - 5 Hours |
| Clean Water Tank (CWT) Capacity | approx. 0.85 L |
| Dirty Water Tank (DWT) Capacity | approx. 0.7 L (Flat: 0.5 L) |
| Protection Class | IPX4 |
Drying and Charging Dock Specifications
| Feature | Specification |
|---|---|
| Input | 220 - 240 V~ 50 - 60 Hz |
| Rated Power (Charging) | 35 W |
| Rated Power (Drying) | 620 W |
| Output | 30 V= 1 A |
*Estimated runtime data was determined by Tineco laboratory.
4. Setup
- Unpack the Appliance: Carefully remove all components from the packaging.
- Assemble the Handle: Insert the handle (L) into the main body of the vacuum cleaner until it clicks securely into place.
- Place on Charging Dock: Position the appliance on the Drying and Charging Dock (T). Ensure it is properly seated for charging.
- Charge the Battery: Connect the power adapter to the charging dock and plug it into a wall outlet. Allow the appliance to fully charge before first use (approximately 4-5 hours). The ChromaGlow display (D) will indicate charging status.
- Fill the Clean Water Tank (CWT): Press the Clean Water Tank Release (O) and remove the CWT (N). Fill the CWT with clean water and the recommended Tineco cleaning solution through the Clean Water Inlet (G). Do not exceed the MAX fill line. Reinsert the CWT until it clicks.
- Check Dirty Water Tank (DWT): Ensure the Dirty Water Tank (M) is empty and properly installed before use.
Visual aid:

Image: Main unit and handle assembly.
5. Operating Instructions
- Power On: Press the Power On/Off button (K) to start the appliance.
- Select Cleaning Mode: Press the Mode button (B) to cycle through available cleaning modes:
- AUTO Mode: The iLoop Smart-Sensor (image below) automatically detects dirt and adjusts suction power and water flow for optimal cleaning.
- MAX Mode: Provides maximum suction and water flow for heavily soiled areas.
- HEAT Mode: Activates ThermoBlast technology for hot water mopping.
- QUIET Mode: Operates at a lower noise level for less disruptive cleaning.
Visual aid:

Image: Easy-to-read thumb screen supporting real-time status and mode updates.
- Start Cleaning: Tilt the appliance back to engage the brush roller (P) and begin cleaning. The DustReveal Green LED (H) will illuminate to highlight hidden dirt.
- ThermoBlast Technology: In HEAT mode, the ThermoBlast button (C) activates the hot water spray for enhanced cleaning of stubborn stains. The ThermoBlast Outlet (I) will dispense heated water.
- iLoop Smart-Sensor: The intelligent sensor automatically adjusts suction power and water flow based on the detected level of dirt, ensuring efficient cleaning.
- Edge Cleaning: The appliance features a design that allows for flush edge cleaning, reaching dirt close to baseboards and in corners.
- Flat-Lying Design: The 180° flat-lying design with a 9.9 cm profile allows for easy cleaning under furniture like beds and sofas.
- Power Off: When finished, return the appliance to the charging dock and press the Power On/Off button (K) to turn it off.
Visual aid:

Image: TINECO iLoop Smart-Sensor automatically adjusts suction power and water flow based on dirt detection.

Image: ThermoBlast technology with golden spray angle and enhanced water flow.
6. Maintenance
- Self-Cleaning Cycle (FlashDry): After each use, place the appliance on the Drying and Charging Dock (T) and press the Self-cleaning button (A). The FlashDry system will clean the brush roller with heated water and then dry it at 85°C for 5 minutes. A SilentDry mode (40 minutes) is also available.
- Empty and Clean Dirty Water Tank (DWT): Regularly empty the DWT (M) by pressing the Dirty Water Tank Release (E) and lifting it by the handle (F). Rinse the tank thoroughly with clean water.
- Clean Brush Roller: The brush roller (P) features an anti-tangle design. During self-cleaning, a comb and squeegee work to remove hair and debris. For manual cleaning, remove the brush roller and rinse it under running water.
- Clean Dry Filter: Remove and clean the Dry Filter (S) regularly to maintain optimal suction performance. Rinse with water and ensure it is completely dry before reinserting.
- StreakFree Squeegee Maintenance: The innovative StreakFree squeegee automatically lowers during backward movement to ensure floors are dry and streak-free. Ensure it is kept clean for optimal performance.
Visual aid:

Image: FlashDry self-cleaning system with heated water cleaning and 5 min flash drying at 85°C or 40 min SilentDry.

Image: Quick dirty water disposal, showing one-hand removal of the dirty water tank.
7. Troubleshooting
If you encounter any issues with your Tineco Floor ONE S9 Master, please refer to the following common troubleshooting steps. For more detailed information, consult the full user manual (PDF) linked in the Support section.
- Appliance not turning on: Ensure the battery is fully charged and the appliance is properly seated on the charging dock. Check the power connection to the dock.
- Low suction power: Check if the Dirty Water Tank (DWT) is full and needs emptying. Clean the brush roller (P) and the Dry Filter (S) for any blockages. Ensure the clean water tank has sufficient water and solution.
- Water leaks: Ensure both the Clean Water Tank (CWT) and Dirty Water Tank (DWT) are correctly installed and sealed. Check for any cracks or damage to the tanks.
- Brush roller not rotating: Check for any hair or debris tangled around the brush roller. Ensure the brush roller is correctly installed.
- Unusual noises: Turn off the appliance immediately and check for any foreign objects caught in the brush roller or air ducts.
8. User Tips
- Controlling Hot Water Function: The ThermoBlast hot water mopping function is activated in 'HEAT' mode. If you prefer to clean without hot water, simply select 'AUTO', 'MAX', or 'QUIET' mode instead.
- Optimal Cleaning Solution: Always use Tineco brand cleaning solution for best results and to prevent damage to the appliance.
- Regular Self-Cleaning: Run the self-cleaning cycle after every use to keep the brush roller and internal components clean and odor-free.
- Check Filters: Periodically check and clean the dry filter to maintain strong suction and prevent motor strain.
9. Warranty and Support
Your Tineco Floor ONE S9 Master comes with a manufacturer's warranty. Please refer to the full user manual for detailed warranty terms and conditions.
For expert customer service and support, please visit: global.tineco.com/support. Response is typically within 24 hours.
A comprehensive user manual in PDF format is available for download:
10. Recycling Information
Battery Recycling Information (BattG)
The battery contains materials that are harmful to the environment and must therefore be removed from the appliance before disposal. The appliance must be switched off to remove the battery.
Batteries and accumulators must not be disposed of with household waste! Every consumer is obliged to hand in all batteries and accumulators, regardless of whether they contain harmful substances or not, at a collection point in their municipality/district or in stores, so that they can be disposed of in an environmentally friendly manner. Please only hand in batteries and accumulators in a discharged state.
Therefore, batteries and accumulators are marked with the symbol shown on the left.

Image: Battery recycling symbol.
WEEE Recycling Information
Old appliances must not be disposed of with household waste! Every consumer is obliged to hand in all appliances at the end of their service life at a collection point in their municipality/district or in stores, so that they can be disposed of professionally and in an environmentally friendly manner.
The illustration on the left shows the symbol of the wheeled bin, which indicates the separate collection of electrical and electronic equipment (WEEE).

Image: WEEE recycling symbol.
Symbols Guide
| Symbol | Meaning |
|---|---|
| Read the instruction manual | |
| For indoor use only | |
| Direct Current (DC) | |
| Alternating Current (AC) |