1. Introduction
The Herdio HWAS4 In-Wall Speaker Selector Switch provides a convenient solution for controlling audio distribution to multiple speaker zones in your home. This 4-channel controller supports up to 120W peak power per channel, offering distortion-free audio adjustment with its passive, transformer-based design. It is designed for hassle-free installation, fitting standard single-gang electrical junction boxes, and is compatible with a wide range of speaker impedances and wire gauges.
2. Key Features
- 4-Zone Independent Control: Manage audio in up to four separate zones.
- 120W Peak Distortion-Free Audio: Handles up to 120W peak / 60W RMS per channel with passive, transformer-based volume control for zero sound quality loss.
- 3-Mode Flexible Multi-Zone Control: Selectable operation modes for customizable speaker zone setup, allowing effortless switching between individual, grouped, or all zones.
- In-Wall Sleek Design: Blends seamlessly with your home decor.
- Hassle-Free Standard Installation: Designed to fit standard single-gang electrical junction boxes, similar to regular light switches.
- Universal Wide Compatibility: Works with 4Ω, 8Ω, and 16Ω impedance speakers.
- Robust & Secure Connections: High-quality terminal blocks accept up to 14AWG speaker wire for reliable audio transmission.
- Durable White Finish: Ensures longevity and aesthetic appeal.

3. What's in the Box
Upon opening your Herdio HWAS4 package, you should find the following items:
- 1 x 4-Channel Volume Controller (HWAS4)
- 1 x Replaceable Cover
- Installation Screws
- Owner's Manual

4. Technical Specifications
| Feature | Specification |
|---|---|
| Model | HWAS4 |
| Speaker Maximum Output Power | 120W (Peak) / 60W (RMS) per channel |
| Surround Sound Channel Configuration | 2.0 (Stereo) |
| Control Method | Touch (Rotary Knobs) |
| Impedance Compatibility | 4Ω, 8Ω, 16Ω (8Ω recommended for volume control) |
| Wire Gauge Support | Up to 14 AWG |
| Water Resistance Level | Not water resistant |
| Form-factor | In-wall |
| Dimensions (H x W) | 4.5" x 2.75" (Standard Single-Gang) |

5. Setup and Installation
5.1 Safety Precautions
- Always disconnect power to the circuit before installing or servicing any electrical device.
- Ensure all wiring is done by a qualified individual and complies with local electrical codes.
- Do not exceed the maximum power handling capacity of the device (120W Peak / 60W RMS per channel).
5.2 Installation Location
The HWAS4 is designed for in-wall installation and fits standard single-gang electrical junction boxes. Choose a location that is easily accessible and central to the speaker zones you wish to control.
5.3 Wiring Instructions
The HWAS4 uses robust terminal blocks for secure connections. It supports speaker wires up to 14 AWG.
- Prepare Wires: Strip approximately 1/2 inch (1.2 cm) of insulation from the ends of your amplifier output wires and speaker wires.
- Connect Amplifier Output: Connect the speaker output wires from your amplifier to the input terminals on the HWAS4. Ensure correct polarity (positive to positive, negative to negative). The HWAS4 acts as an intermediary between your amplifier and multiple pairs of speakers.
- Connect Speaker Zones: Connect the speaker wires from each of your four speaker zones (A, B, C, D) to the corresponding output terminals on the HWAS4. Again, observe correct polarity for each connection.
- Secure Connections: Ensure all wires are firmly seated in their respective terminal blocks to prevent loose connections and potential short circuits.
- Mount the Switch: Carefully place the wired HWAS4 into the wall junction box and secure it with the provided installation screws. Attach the replaceable cover plate.


6. Operation
The Herdio HWAS4 allows for flexible control over your speaker zones using its four rotary knobs.
6.1 Zone Control
Each knob (labeled A, B, C, D) corresponds to a specific speaker zone. To activate or deactivate a zone, simply rotate the corresponding knob. The passive design ensures distortion-free audio adjustment.

6.2 Multi-Zone Operation Modes
The HWAS4 supports three selectable operation modes for customizable speaker zone setup:
- Individual Zones (A, B, C, D): Activate each zone independently by turning its respective knob.
- Grouped Zones (A+B/C+D): Combine specific zones for simultaneous control.
- All Zones (A+B+C+D): Activate all connected speaker zones at once.


7. Maintenance
The Herdio HWAS4 requires minimal maintenance. To keep your device in optimal condition:
- Cleaning: Use a soft, dry cloth to wipe the surface of the switch. Avoid using harsh chemicals or abrasive cleaners, as they may damage the finish.
- Connections: Periodically check all wire connections to ensure they remain secure. Loose connections can lead to poor audio quality or intermittent sound.
8. Troubleshooting
If you encounter issues with your Herdio HWAS4, try the following troubleshooting steps:
- No Sound from a Zone:
- Ensure the corresponding knob for that zone is fully engaged.
- Check the speaker wire connections for that zone at both the HWAS4 and the speaker end.
- Verify that the amplifier is powered on and functioning correctly.
- No Sound from Any Zone:
- Confirm that the amplifier's output is correctly connected to the HWAS4's input terminals.
- Check all amplifier settings and connections.
- Ensure all zone knobs on the HWAS4 are engaged.
- Distorted or Poor Audio Quality:
- Check all speaker wire connections for proper polarity and secure fit.
- Ensure your speakers' impedance is compatible with the HWAS4 (4Ω, 8Ω, or 16Ω).
- Verify that the amplifier's output power does not exceed the HWAS4's handling capacity.
9. User Tips
- Amplifier Connection Clarity: When connecting your amplifier, ensure its speaker output is connected to the input terminals of the HWAS4. The HWAS4 then distributes this signal to your chosen speaker zones.
- Wire Management: For a clean and professional installation, consider using cable ties to manage speaker wires within the wall box before securing the switch.
10. Warranty and Support
For warranty information, technical support, or customer service inquiries, please refer to the contact details provided with your purchase or visit the official Herdio website.
Note: An instruction manual for the Herdio HWA16BT Bluetooth Audio Control Amplifier Receiver System is available as a PDF at this link. Please be aware that this PDF is for a different product model (HWA16BT) and not the HWAS4 speaker selector switch.