1. Introduction
The GLEDOPTO Elite 1D2P-EXMU GL-C-620WL is a versatile WLED controller designed to manage both digital RGBIC and PWM single-color/CCT LED strips. It features a built-in relay and fuse for enhanced safety and energy efficiency, along with Ethernet and Type-C connectivity for reliable control and easy updates. This manual provides detailed instructions for setting up, operating, and maintaining your controller.
Key Features:
- Dual Output Support: Compatible with both Digital and PWM LED strips.
- Wide Voltage Input: Supports DC 5V – 24V, with a maximum total current of 15A.
- Built-in Relay & Fuse: Energy-saving relay reduces standby power consumption; fuse protects against overcurrent.
- Ethernet Port with Crystal Oscillator: Stable wired network connection, plug-and-play.
- Type-C Port: Can be used for power supply (5V, 3A max) and firmware downloading.
- Sound-Reactive Effects: Built-in microphone allows LED effects to sync with music rhythm.
- Advanced App Control: Fully compatible with WLED app, supports Alexa and Home Assistant.
- Multiple Input Options: Power via terminal block, DC jack, or Type-C.
2. Safety & Warnings
Please read all instructions carefully before use to ensure safety and prevent damage to the device or injury.
- Children Safety: Keep the device and its cord out of reach of children under 3 years old.
- Power Input: For DC port connections, do not exceed 3A. Exceeding this limit may damage the controller.
- LED Strip Compatibility: This controller has three PWM channels: V+, IO4, and IO2. It can only connect to 3-wire CCT LED strips or 2-wire monochrome LED strips. It cannot connect to PWM RGB/RGBW/RGBCCT light strips.
- Fuse Protection: The built-in 20A fuse is designed to protect the circuit. It will blow if the current exceeds 15A, preventing damage to the controller and connected strips.
3. Package Contents
Verify that all items are present in the package:
- 1 x Elite 1D2P-EXMU Controller
- 1 x User Instruction (this manual)
- 1 x 3cm Sticker
- 1 x 5A Pluggable Fuse
- 1 x Packaging Box
4. Specifications
| Attribute | Specification |
|---|---|
| Model No. | GL-C-620WL |
| Input Voltage | DC 5-24V |
| Total Output Current | 15A Max |
| Output Current/Channel | 10A Max |
| Type-C Voltage | 5V |
| DC/Type-C Current | 3A Max |
| IP Rate | IP20 |
| Material | Flame Retardant PC |
| Net Weight (N.W.) | 78.1g |
| Gross Weight (G.W.) | 87.2g |
| Size | 129x50x23mm |
| Operating Temperature | -20~45°C |
| Connection Mode | WiFi/Ethernet |
| Certification | CE, ROHS |
| Applicable Lights | PWM WS2811 WS2812 WS2813 WS2815 SK6812 Digital RGBIC Strip Light |
| Controlled Method | APP/remote control/External switch |
5. Setup
5.1 Initial Preparation
- Remove all protective films from the device.
5.2 Power Connection
The controller supports three input methods for power:
- V+, V- power interface (terminal block)
- 5.5x2.1mm DC Socket
- Type-C interface
Connect the provided USB cable to a certified 5V power adapter for Type-C power. Ensure the power supply matches the voltage requirements of your LED strips (DC 5-24V).
5.3 Power On
Press and hold the function button for 3 seconds to power on the device.
5.4 Network Connection
The controller can be connected to your network via wired Ethernet or wirelessly via WiFi.
Wired Connection (Ethernet)
The Ethernet function is configured by default. After connecting the controller to your router with an Ethernet cable, you can use the app to control it without configuring WiFi.
Wireless Connection (WiFi)
If you prefer a wireless connection, the device can be configured via the WLED app after initial power-up.
5.5 LED Strip Wiring
The controller features quick-connect port design for convenient wiring. To connect your LED strips:
- Open the connector upwards.
- Insert the wire into the terminal.
- Press down on the connector to secure the wire.
Refer to the following diagrams for specific wiring configurations:
The controller supports a wide range of digital and PWM LED strip types:
5.6 Microphone Configuration
The microphone function is configured by default. If you perform a factory reset, you may need to reconfigure the microphone parameters and restart the device. The typical configuration information is:
- Type: Generic I2S PDM
- Pin I2S SD: 32
- Pin I2S WS: 15
6. Operation
6.1 Basic Control
- Function Button: Short press the function button on the controller to cycle through different modes/functions.
6.2 WLED App / PC Web Control
Control your LED strips using the WLED app on your mobile device or via a web interface on your PC. This offers multiple options for easy and convenient control.
6.3 Dynamic Effects
The WLED controller offers over 100 dynamic effects to choose from, ensuring there's always one that suits your needs.
6.4 Segmented Color Control
Personalize your lighting by controlling individual segments of your LED strip to display different colors simultaneously.
6.5 Sync Lighting
On the same WiFi network, the lighting effects of LED strips connected to the WLED controller can be synchronized for a cohesive lighting experience.
6.6 Sound-Reactive Effects (Microphone Function)
Utilize the built-in I2S PDM high-sensitivity microphone to make your LED effects react to music and sounds, creating an immersive audio-visual experience.
6.7 WLED Remote Control
The controller supports WLED remote controls (e.g., GL-RC-002WL) which offer a long transmission distance and stable signal for convenient control.
6.8 DIY IO13 Port
The DIY IO13 port allows you to connect external switches, sensors, and other components for customized control. The function button is GPIO17.
| GPIO 13 (Button 0) | Action |
|---|---|
| Short press | On/Off |
| Long press | Adjust color |
| Long press 10s | Enter WiFi-AP mode, pop-up hotspot "WLED-AP" |
| GPIO 17 (Button 1) | Action |
|---|---|
| Short press | Adjust mode |
| Double-tap | Adjust color in mode |
| Long press | Adjust brightness |
7. Maintenance
7.1 Firmware Updates
Keep your controller up-to-date with the latest features and improvements through firmware updates. There are two primary methods for updating:
- Type-C UART: Connect the controller via its Type-C port to a computer and use the UART method. For detailed instructions, visit https://gledopto.com/wled_flash.html.
- WLED APP: Update directly through the WLED application. Download the latest app version from https://github.com/GLEDOPTO/WLED/releases.
8. Troubleshooting
8.1 Overcurrent Protection (Fuse)
The controller is equipped with a 20A pluggable fuse. The characteristics of a fuse are related to temperature and current; higher current leads to higher temperature. Using a 20A fuse ensures that the controller can safely handle up to 15A. If the current exceeds 15A, the fuse will blow to protect the circuit from damage. If your controller stops working, check the fuse and replace it if necessary.
8.2 Heat Dissipation
The controller features an excellent heat dissipation hole design to ensure stable operation and prevent overheating, even under continuous use.
8.3 Energy Saving Relay
The built-in energy-saving relay helps reduce standby power consumption. When the power is turned off, there is no current passing through the LED strip, thus reducing power consumption compared to systems without a relay.
9. User Tips
- Relay Control: For advanced users, GPIO18 can be used for relay control.
- Remote Pairing: If using a remote control, remember to pair it with the controller for proper functionality.
10. Warranty & Support
For any questions or support needs, please contact the manufacturer or the EU authorized representative:
Manufacturer Information:
- Company: Shenzhen shengluomei technology co., ltd
- Address: No. 205 no. 6, lane 2, wuhiro community, sakata street, longgang district, shenzhen city, guangdong province, China
- Phone: +86-15914360896
- Email: 821880792@qq.com
EU Authorized Representative:
- Company: Apex CE Specialists GmbH
- Address: Grafenberger Allee 277, 40237 Düsseldorf, DE
- Phone: +49-1776995991
- Email: Info@apex-ce.de
A PDF version of the user manual is available for download. Please refer to the product page or contact support for the direct link.