intelamp YL002-12A

Contents

Intelamp Solar Flood Light User Manual

Model: YL002-12A | Brand: intelamp

1. Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.

2. Product Overview

The Intelamp Solar Flood Light is a high-performance outdoor lighting solution designed for security and general illumination. It features a large solar panel, a high-capacity lithium battery, and intelligent motion sensing capabilities, all housed in a durable, waterproof casing.

Key Features:

  • Long Range Motion Sensor: Detects motion up to 30 meters (100 feet) and can intelligently link with other Intelamp lights within range to activate simultaneously.
  • High Brightness & Long Lighting Time: Delivers 3000LM brightness and can last up to 40 hours on a full charge, with 4 hours at peak brightness.
  • Efficient Solar Charging: Equipped with a 22.5% high conversion rate solar panel (5V 2.6A) for rapid charging in 5 hours of strong sunlight.
  • High-Capacity Battery: Features an electric vehicle-grade 12000mAh (3.2V) lithium battery for extended lifespan and reliable performance.
  • Intelligent Remote Control: Allows selection of motion sensing delay (30s, 3min, 10min), constant-on mode, and brightness adjustment (60%, 80%, 100%).
  • Solid & Versatile Installation: Can be securely mounted to walls, boards, or various posts using unique strong mounting accessories.
  • Durable & Weatherproof: IP65 rated, ensuring reliable operation in rain, snow, and other adverse weather conditions.
  • Long Service Life: Solar panel designed for over 15 years, battery for over 5 years, and the lamp itself for over 3 years.

Video: Demonstrates motion sensor activation and waterproof capabilities of the solar light.

3. Specifications

AttributeValue
Brand Nameintelamp
Model NumberYL002-12A
Power SourceSOLAR
Installation MethodSelf-contained
Bulbs IncludedYes (LED bulbs)
Light SourceLED bulbs
DimmableYes
Solar Cell TypeLithium battery
Protection LevelIP65 (Waterproof)
Body MaterialABS
UseOutdoor / Security Lighting
Battery Capacity12000mAh (3.2V)
Brightness3000LM
Solar Panel Conversion Rate22.5% (5V 2.6A)
Solar Panel Dimensions34cm (H) x 23cm (W)
Light Fixture Dimensions23.6cm (H) x 19.2cm (W)
Cable Length5m
Remote Control Dimensions11.3cm (H) x 6.2cm (W)
Package Dimensions36cm (L) x 25cm (W) x 12cm (H)
Package Weight2.8 kg
CertificationsCE, FCC, GS, LVD, ROHS, UL
Product dimensions diagram

Image: Detailed dimensions of the solar panel, light fixture, remote control, and cable length.

4. Package Contents

Your Intelamp Solar Flood Light package should include the following items:

  • 1 x Solar Flood Light Fixture
  • 1 x Solar Panel
  • 1 x Remote Control
  • 1 x 5-meter Connecting Cable
  • 1 x Set of Mounting Accessories (screws, brackets)
Main product image showing solar panel, flood light, and remote control

Image: Main product components including the solar panel, flood light, and remote control.

5. Setup & Installation

  1. Preparation: Remove all protective films from the solar light casing and solar panel. Ensure the solar panel surface is unobstructed and free of stains.
  2. Location Selection: Install or place the light fixture and solar panel in a well-lit, unobstructed location that receives 6-8 hours of direct sunlight daily. A recommended installation height is 1.8-2.5 meters (approximately 6-8 feet).
  3. Mounting: Use the provided mounting accessories to securely attach the solar panel and light fixture to a wall, board, or suitable post. Ensure the solar panel is angled to maximize direct sunlight exposure.
  4. Connection: Connect the 5-meter cable from the solar panel to the light fixture.
Icons representing solar charge, motion sensor, IP65, energy saving, easy install

Image: Visual representation of key features including easy installation.

Connectable solar sensor light with 30m range

Image: Illustrates the connectable solar sensor and its 30-meter detection range.

6. Operation

  1. Initial Charging: No manual charging is required. Once installed, the solar panel will automatically absorb sunlight and store electrical energy. Allow 6-8 hours of sufficient direct sunlight for a full charge. A blinking green light on the lamp indicates it is charging.
  2. Power On: Locate the power switch on the side/bottom of the light fixture and switch it to the "ON" position. Some models may have an "Auto" position for light-controlled mode, where the light automatically turns on after dark and off at dawn.
  3. Selecting Modes (via Remote Control): Use the provided remote control to cycle through various lighting modes and settings. The remote control diagram below details the functions:
Remote control functions diagram

Image: Remote control diagram showing ON/OFF, Sensor Mode (30s/3m/10m), Lighting Modes (2H/+1H/6H), and Brightness Adjustment (60%/80%/100%).

  • ON/OFF: Press the 'ON' or 'OFF' buttons to manually turn the light on or off.
  • Sensor Mode: A short press of the mode button cycles through sensor modes. In sensor mode, the light automatically turns on when it detects human activity and turns off after a set delay (30 seconds, 3 minutes, or 10 minutes) when no one is around, making it energy-efficient.
  • Lighting Modes (Constant Light): Select 2H, +1H, or 6H for continuous lighting. The light will turn on automatically for 2-12 hours at night and will dim or turn off after the programmed time.
  • Brightness Adjustment: Adjust the light intensity to 60%, 80%, or 100% using the dedicated buttons.
Visual representation of three lighting modes

Image: Visual representation of Strong Light Sensor Mode, Dim Light Sensor Mode, and Strong Long Light Mode.

Strong Light Motion Sensor Mode illustration

Image: Illustrates the Strong Light Motion Sensor Mode: off, then 100% brightness on motion, then off after a delay.

Long Light Mode illustration

Image: Illustrates the Long Light Mode (Motion Sensor Deactivated): continuous light at 80% brightness, then off.

Intelligent sensor connection diagram

Image: Diagram showing intelligent sensor connection between two lights up to 30m/100ft apart.

7. Maintenance

  • Clean Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures optimal sunlight absorption and charging efficiency.
  • Check Connections: Periodically inspect the cable connection between the solar panel and the light fixture to ensure it is secure and free from damage.
  • Clear Obstructions: Ensure no trees, buildings, or other objects are blocking direct sunlight from reaching the solar panel, especially during peak charging hours.
  • Battery Care: While the lithium battery is designed for long life, extreme temperatures can affect performance. Avoid prolonged exposure to temperatures outside the recommended operating range.
Blinking green light indicates charging

Image: A blinking green light indicates the lamp is charging. Note on reduced charging in adverse weather.

IP65 Waterproof light working in rain

Image: The IP65 waterproof light working reliably in rain.

8. Troubleshooting

ProblemPossible CauseSolution
Light does not turn on at night.Power switch is OFF.
Insufficient solar charge.
Faulty connection.
Ensure the power switch is in the 'ON' or 'Auto' position.
Relocate the solar panel to an area with more direct sunlight for 6-8 hours.
Check the cable connection between the solar panel and light fixture.
Light is dim or does not last long.Insufficient solar charge.
Dirty solar panel.
Weather conditions.
Ensure the solar panel receives 6-8 hours of direct sunlight daily.
Clean the solar panel surface regularly.
Charging efficiency may be reduced on cloudy or rainy days.
Motion sensor is not working.Incorrect mode selected.
Sensor obstructed.
Distance too far.
Ensure the light is in a motion sensor mode via the remote control.
Check for any obstructions blocking the sensor's view.
Ensure motion is within the 30-meter detection range.
Remote control not responding.Battery depleted.
Obstruction between remote and light.
Replace the remote control battery.
Ensure a clear line of sight between the remote and the light fixture.

9. User Tips

  • Optimal Solar Panel Placement: For best performance, position the solar panel facing south (in the Northern Hemisphere) or north (in the Southern Hemisphere) to maximize direct sunlight exposure throughout the day.
  • Utilize Intelligent Sensor Linking: If you have multiple Intelamp solar lights, strategically place them within 30 meters of each other to take advantage of the intelligent sensor linking feature for broader and more responsive coverage.
  • Adjust Settings for Energy Saving: Use the remote control to fine-tune the motion sensor delay and brightness levels according to your specific needs and desired battery life. Lower brightness or shorter sensor delays can extend overall operating time.
  • Winter Performance: During colder months or periods of reduced sunlight, the charging efficiency and nighttime illumination duration may be reduced. Ensure the solar panel is free of snow and ice.

10. Compliance Information

This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Our company has assessed the requirements and regulations applicable to this product based on its actual product type, function, and target market. The product meets the testing requirements of Shenzhen BCTC.

CE

Manufacturer & EU Representative Info:

  • Manufacturer: Shenzhen Jindian Electronic Technology Co., Ltd, No. 9, Tianyang 1st Road, Datianyang Industrial Zone, Dongfang Community, Songgang Street, Bao'an District, Shenzhen City, Guangdong Province, China. Email: service@intelamp.com
  • EU Authorized Representative: SUCCESS COURIER SL, CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain. Email: successservice2@hotmail.com

11. Warranty & Support

For any questions, technical support, or warranty claims, please contact the manufacturer or your point of purchase. Please refer to the contact information provided in the Compliance Information section.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.