SEMBO BLOCK Hurricane Warrior 202243

Contents

SEMBO BLOCK Hurricane Warrior Transforming Robot Assembly Manual

Model: Hurricane Warrior 202243

1. Introduction

Thank you for choosing the SEMBO BLOCK Hurricane Warrior Transforming Robot assembly model. This building block set allows you to construct a detailed and articulated robot that can transform from multiple individual aircraft. This manual provides essential information for assembly, operation, and care to ensure a rewarding building experience.

2. Safety Warnings

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

This product contains small parts and is recommended for ages 14 and above. Keep out of reach of small children to prevent choking hazards.

3. Package Contents

Please verify that all components are present before beginning assembly.

  • 888 pieces of small building blocks for the Hurricane Warrior model.
  • Assembly instruction booklet (physical or digital).
  • Sticker sheet (if applicable).

Note: This product may be shipped without its original retail box.

4. Specifications

AttributeDetail
Model NameHurricane Warrior
Model Number202243
BrandSEMBO BLOCK
MaterialPlastic
Piece Count888 PCS
Recommended Age14+ years
Block TypeSmall building block (Compatible with Lego)
Assembled Dimensions (approx.)24.2 cm (Width) x 26.9 cm (Height) x 14 cm (Depth)
SEMBO BLOCK Hurricane Warrior dimensions
Figure 1: Assembled model dimensions (approx. 24.2cm W x 26.9cm H x 14cm D).

5. Assembly Instructions

The Hurricane Warrior robot is designed to be assembled from multiple smaller aircraft modules. Follow the step-by-step instructions provided in the accompanying instruction booklet.

5.1 Initial Preparation

  • Unpack all building block bags and sort pieces by color and type to facilitate assembly.
  • Ensure you have a clean, well-lit workspace.

5.2 Building Individual Aircraft Modules

The robot is composed of several distinct aircraft. The instruction booklet will guide you through building each of these modules first.

Individual aircraft components of Hurricane Warrior
Figure 2: Display of the five individual aircraft modules that form the Hurricane Warrior.

5.3 Combining Modules to Form the Robot

Once all individual aircraft modules are complete, follow the instructions to connect them to form the full Hurricane Warrior robot. Pay close attention to the joint connections to ensure stability.

Hurricane Warrior robot formed from fighter jets
Figure 3: The Hurricane Warrior robot assembled from its fighter jet components.

5.4 Securing Joints

Ensure all joints are firmly connected. The model features tight, articulated joints for posing.

Hurricane Warrior with tight, articulated joints
Figure 4: Highlighting the tight and articulated joints of the assembled robot.

6. Operation and Transformation

6.1 Posing the Robot

The Hurricane Warrior features multiple articulated joints, allowing for a wide range of dynamic poses. Gently adjust the limbs and body sections to achieve desired stances.

Hurricane Warrior in a dynamic pose
Figure 5: The Hurricane Warrior can be posed in various dynamic positions.

6.2 Transformation

The Hurricane Warrior is a transforming robot. To transform it back into its individual aircraft or into alternative configurations, carefully reverse the assembly steps or follow the specific transformation instructions in the manual. Always apply gentle pressure to avoid damaging the block connections.

7. Maintenance

  • Cleaning: To clean the model, gently wipe it with a dry, soft cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
  • Storage: Store the model in a cool, dry place away from direct sunlight to prevent discoloration or material degradation.
  • Handling: Handle the model with care, especially when transforming or posing, to prevent pieces from detaching or breaking.

8. Troubleshooting

8.1 Missing Pieces

If you find any missing pieces during assembly, please contact the seller with details of the missing parts (e.g., part number from the instruction manual, color, quantity). Provide your order information for assistance.

8.2 Loose Connections

If parts feel loose after assembly, double-check that they are fully pressed together. Sometimes, a slight adjustment or re-seating of the block can create a more secure connection.

8.3 Difficulty Transforming

Transformation can be complex. Refer to the instruction manual for specific transformation sequences. If a part feels stuck, do not force it. Re-examine the steps and ensure all joints are correctly aligned and unlocked for movement.

9. User Tips

  • Organize Your Workspace: Before starting, lay out all pieces on a flat surface. Using small containers for different types or colors of blocks can significantly speed up the building process.
  • Follow Instructions Carefully: Building block models often have intricate steps. Take your time and follow each step precisely to avoid errors that might require reassembly.
  • Gentle Handling: While the joints are designed to be tight, always use gentle, even pressure when connecting or disconnecting pieces to prevent damage.

10. Warranty and Support

For any product-related inquiries, technical support, or assistance with missing/damaged parts, please contact the seller directly through the platform where you purchased the item. Provide your order number and a clear description of the issue for prompt assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.