MICTUNING BB40/BB60

Contents

MICTUNING BB40/BB60 Wireless Switch Panel User Manual

Model: BB40/BB60 | Brand: MICTUNING

1. Introduction

Thank you for choosing the MICTUNING BB40/BB60 Wireless Switch Panel. This manual provides detailed instructions for the installation, operation, and maintenance of your new wireless control system. This system allows for remote control of multiple auxiliary devices in your vehicle with ease and a clean, professional installation.

Video: Overview of the MICTUNING Wireless Switch Panel features and operation.

2. Safety Information

  • Always disconnect the vehicle's battery before performing any electrical installation or maintenance.
  • Ensure all wiring connections are secure and properly insulated to prevent short circuits.
  • Verify the voltage and current ratings of your auxiliary devices do not exceed the switch panel's specifications.
  • Do not expose the control box or switch panel to extreme moisture or direct water spray.
  • Use appropriate fuses as specified in the wiring diagrams to protect circuits.
  • Professional installation is recommended if you are unfamiliar with automotive electrical systems.

3. Package Contents

BB40 (4-Gang) Package:

MICTUNING BB40 Wireless Switch Panel complete package contents

Image: Complete package contents for the BB40 model.

Item No.AccessoryQuantity
1Control Box1
2Switch Panel1
3140 Stickers1
4User Manual1
5Bracket1
6USB Cable1
7Wires4
8Fuses4
9AAA Batteries2
10Screws1
11Terminal Connectors1
12Screwdriver1

BB60 (6-Gang) Package:

MICTUNING BB60 Wireless Switch Panel complete package contents

Image: Complete package contents for the BB60 model.

Item No.AccessoryQuantity
1Control Box1
2Switch Panel1
3140 Stickers1
4User Manual1
5Bracket1
6USB Cable1
7Wires6
8Fuses6
9AAA Batteries2
10Screws1
11Terminal Connectors1
12Screwdriver1

4. Specifications

FeatureBB40 (4-Gang)BB60 (6-Gang)
Input VoltageDC 12V/24VDC 12V/24V
Max. Current60A80A
Max. Power @ 12V720W960W
Max. Power @ 24V1440W1920W
Operating Temperature-30°C to 85°C (-22°F to 185°F)-30°C to 85°C (-22°F to 185°F)
Control RangeUp to 164 FTUp to 164 FT
Panel Dimensions (approx.)1.5 in x 3.8 in1.5 in x 5.4 in
BB40 Wireless Switch Panel dimensions and specifications

Image: BB40 Panel Dimensions and Specifications.

BB60 Wireless Switch Panel dimensions and specifications

Image: BB60 Panel Dimensions and Specifications.

5. Installation

5.1 Mounting the Switch Panel

The switch panel can be mounted using the provided bracket. Choose a suitable location on your dashboard or console that is easily accessible and does not obstruct your view or vehicle controls.

5.2 Power Supply for Switch Panel

The wireless switch panel can be powered by two AAA batteries (included) or via the provided USB Type-C cable. Insert the batteries into the battery compartment or connect the USB cable to a suitable power source.

5.3 Wiring the Control Box

The control box manages the power distribution to your auxiliary devices. Follow the appropriate wiring diagram for your model (BB40 or BB60). It is crucial to connect the control box to an ACC (Accessory) power source or the positive pole of the battery to ensure normal operation.

Simplified wiring diagram for 4-gang control box

Image: 4-Gang Wiring Diagram (BB40). Connect to ACC or positive battery terminal.

Note: The control box must be connected to ACC to operate normally.

Simplified wiring diagram for 6-gang control box

Image: 6-Gang Wiring Diagram (BB60). Connect to ACC or positive battery terminal.

Note: The control box must be connected to ACC to operate normally.

Before and after image showing organized wiring with the control box

Image: Keep your engine bay tidy with the control box.

6. Operation Instructions

6.1 Standby State

To enter standby mode, press any two buttons on the switch panel simultaneously. The WHITE backlight will illuminate, indicating the panel is in standby.

6.2 Working State

From the standby state, press any single button. The YELLOW indicator light for that button will turn on, signifying that the corresponding device is now in its working state.

6.3 Power Off

To power off the switch panel, press any two buttons simultaneously again. The indicator lights will turn off, confirming the panel is powered down.

7. Control Mode Setting

The switch panel offers four customizable control modes for each button: Constant Light, Flash, Strobe, and Momentary.

Visual guide to the 4 control modes: Toggle, Flash, Strobe, Momentary

Image: 4 Control Modes with color-coded indicators.

  1. Enter Setting Mode: Power on the panel. Long-press any two buttons simultaneously for 3 seconds. The white backlight will turn off, and the yellow indicators will light up or start flashing, indicating you have entered Control Mode Setting.
  2. Select Mode: Press any button repeatedly to cycle through the four modes:
    • Constant Light (Toggle): Red indicator. Turns on/off with each press.
    • Flash: Purple indicator. Slow blinking.
    • Strobe: Green indicator. Rapid flashing.
    • Momentary: Blue indicator. Active only while the button is pressed.
    The yellow indicator for the selected button will confirm the mode. Set each button to your desired mode.
  3. Exit Setting Mode: After configuring all buttons, long-press any two buttons simultaneously for 3 seconds again. The yellow indicator will flash once and then turn off, confirming that the settings are saved and complete.

8. Pairing the Switch Panel with Control Box

Follow these steps to pair your wireless switch panel with the control box:

Easy pairing steps for the wireless switch panel and control box

Image: Easy Pairing Process.

  1. Ensure the control box is properly wired and connected to an ACC power source.
  2. Press the pairing button located on the control box.
  3. Then, press any button on the wireless switch panel.
  4. The pairing indicator light on the control box will flash 3 times, confirming that the pairing is successful.

9. Applications

The MICTUNING Wireless Switch Panel is designed for a wide range of applications, providing convenient control for various auxiliary devices in different vehicles.

Examples of vehicles and applications for the switch panel

Image: Wide Application examples.

  • Vehicles: Off-road trucks, UTVs, Boats, RVs, Cars, Pickups.
  • Devices: LED light bars, winches, compressors, horns, floodlights, rock lights, wheel rings, whip lights, driving lights, underglow lights, and other auxiliary ON-OFF accessories.

10. User Tips

  • For optimal performance and to ensure smooth operation, it is recommended to replace the AAA batteries in the wireless switch panel after approximately 16 hours of continuous use.
  • Utilize the provided 140 stickers to clearly label each button for quick identification of its function.
  • When installing, consider placing the control box in a location that is protected from direct water exposure but still allows for adequate ventilation.

11. Troubleshooting

  • Panel not responding: Check if the AAA batteries are fresh and correctly inserted, or if the USB cable is providing power. Ensure the panel is powered on (white backlight).
  • Device not activating: Verify the control box is receiving power (connected to ACC). Check the wiring connections from the control box to the auxiliary device. Ensure the device itself is functional. Re-pair the switch panel with the control box if necessary.
  • Intermittent control: Check the distance between the switch panel and the control box; ensure it's within the 164 FT range. Check for any strong electromagnetic interference.
  • Indicator lights not working: If the panel's backlight or yellow indicators are not functioning, check the power supply to the panel.

12. Maintenance

  • Cleaning: Wipe the switch panel and control box with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Battery Replacement: Replace AAA batteries in the switch panel as needed to maintain optimal wireless performance.
  • Wiring Inspection: Periodically check all wiring connections for tightness and signs of wear or corrosion.

13. Warranty & Support

For warranty information, technical support, or any questions regarding your MICTUNING Wireless Switch Panel, please refer to the official MICTUNING website or contact their customer service directly. Keep your purchase receipt for warranty claims.

14. Additional Resources

A comprehensive user manual in PDF format is available for download:

Download User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.