1. Introduction
The BAOFENG MINI-5 is an ultra-slim, portable, and professional two-way communication device designed for a wide range of applications. It features a compact, palm-sized design for easy carrying, multi-color appearance options, and an ice-blue backlight. This manual provides detailed instructions for the safe and efficient operation of your MINI-5 handheld radio.
Key features include wireless programming via a mobile app, dual PTT independent key design for managing two frequency groups, one-button frequency matching for quick pairing, and a universal Type-C fast charging interface with a 2200mAh large-capacity lithium battery.
2. Package Contents
Please check the package carefully to ensure all items are present:
| Item | Quantity (PCS) |
|---|---|
| Radio | 1 |
| Battery | 1 |
| Antenna | 1 |
| Belt Clip | 1 |
| Power Adapter | 1 |
| Lanyard | 1 |
| Operation Manual | 1 |
The charger and power supply included are subject to the final configuration. Note that charging methods described in this manual may not be appropriate if using the Type-C charging method directly with a power source not designed for it.

3. Product Overview

Component Identification
- Antenna
- SK1 - Customized Function Keys/Monitor button
- PTT-A Button
- A/B button
- Menu button
- PTT-B Button
- Numeric Keypad/ Speaker
- Flashlight
- Volume/Power Knob
- Screen
- Accessory Port
- Exit button
- ▲Up button/▼ Down button
- Flashlight/Search button
- Microphone
- LED Indicator
- Battery Latch
- Type-C Charging indicator light
- Type-C Charging Port
- V/M-VFO/MR button
- Belt Clip
LCD Display Icons
| Icon | Description |
|---|---|
| RSSI | Squelch Open/Close Indicator |
| H/L | Transmit power level indicator (High/Low) |
| ♪ | DTMF side tone (DT-ST, ANI-ST, DT+ANI) |
| D | DCS enabled |
| C | CTCSS enabled |
| + | Repeater access: TX shifted higher in frequency than RX |
| - | Repeater access: TX shifted lower in frequency than RX |
| D | Dual Watch enabled |
| 0 | Keypad lock enabled |
| VOX | VOX enabled |
| Confidential calling feature activated | |
| N | Narrowband enabled |
| Battery level indicator | |
| R | Reverse function enabled |
| T | Terminal switched from transit mode to pass-through mode |
| SCR | Voice scramble function activated |
4. Setup
4.1. Battery Charging
When using the terminal for the first time, a low battery warning may occur. It is recommended to turn off the radio during charging. The battery's LEDs provide an indication of the current state of charge:
| Indicator Light | Charging Status |
|---|---|
| Red light is always on | Charging |
| Green light is always on | Charging complete |
The MINI-5 features a universal Type-C fast charging interface, compatible with various power sources like power banks, car chargers, and mobile phone chargers.
4.2. Attaching the Antenna
Turn the antenna clockwise until it is tight. To remove the antenna, turn it counterclockwise.
CAUTION:
- Do not hold the radio antenna in your hand, as this will reduce the performance of the radio and the life of the antenna.
- Do not shake the radio with the top of the antenna in your hand, as this will degrade the performance and life of the radio antenna.
5. Operating Instructions
5.1. Basic Operations
- Turning the Radio On/Off: To turn your radio ON, turn the [Volume/Power] rotary knob clockwise. To turn your radio OFF, turn the [Volume/Power] rotary knob counterclockwise.
- Setting the Volume: Increase volume by turning the [Volume/Power] rotary knob clockwise. To decrease volume, turn the [Volume/Power] rotary knob counterclockwise. CAUTION: Do not hold the radio close to your ear. If the volume is set to an uncomfortable level, it could hurt your ear.
- Locking or Unlocking Keypad: To avoid accidentally changing radio settings:
- Press and hold the [*] key to lock the keypad until the screen displays the "" icon.
- In lock mode, you can turn the intercom on and off, adjust the volume, receive, transmit, send call tones, send emergency alerts, and listen to channels. All other functions remain locked.
- In lock mode, press and hold the [*] key to unlock the keypad until the "" icon is no longer displayed.
5.2. Keypad Entry
You can enter radio aliases, channel aliases, numbers, etc., using the radio's numeric keypad.
- To switch between input methods, press #.
- Press 1 to enter a special character (except in numeric input mode, where the number 1 is entered).
- Press 0 to enter a space (except in numeric input mode, in which special characters are entered).
5.3. Channel Selection and Memory
- Selecting a Channel: Press the [V/M] button to toggle between VFO (Frequency) and Channel mode. Use the ▲/▼ buttons or the rotary encoder to select the desired channel. Enter the channel number using the keypad (e.g., 064 for channel 64).
- Channel Memory: In Frequency and Standby mode, you can store frequencies and parameters. Press [MENU] > [3] > [MENU] > [5] to display "MEMCH". Press [MENU] to enter, use ▲/▼ to select the channel, then [MENU] to store. A sound tone confirms success. Press [EXIT] to return to standby mode. NOTE: Set CTCSS tones, DCS codes, or frequency offset before storing. Stored channels are displayed as CH-.
- Deleting a Channel (DEL-CH): In VFO and Standby mode, press [MENU] > [3] > [MENU] > [1] > [6] to display "DELCH". Press [MENU] to enter, use ▲/▼ or the encoder to select the channel to delete, then [MENU] to confirm. NOTE: Channel 1 cannot be deleted.
5.4. Frequency and Band Management
- Main Band/Sub Band Switch: In standby mode, press the [A/B] key to toggle between the A and B bands. The highlighted band is the main band; the darker displayed band is the sub-band.
- VFO/Channel Switch: Press the [V/M] button to switch between VFO (Frequency) and Channel display. VFO mode displays the VFO icon; MR mode displays the channel serial number.
- Setting VFO Frequency: Turn the radio to VFO mode, then press the [A/B] key to switch to the main channel. You can input the VFO frequency directly with the keypad or use the ▲/▼ button or rotary encoder to adjust the VFO frequency in set steps.
5.5. Communication Functions
- Call Service: All radios in a group must be set to the same channel and sub-code to communicate. For optimal reception, keep the microphone 2.5 cm to 5 cm from your mouth when transmitting.
- Initiate a Call: Select a channel. Press and hold [PTT-A] to transmit on segment A (upper screen); the red indicator light will be on. Speak into the microphone. Press and hold [PTT-B] to transmit on segment B (lower screen); the red indicator light will be on.
- Receive a Call: After releasing the PTT key, the radio is in a receivable state. When receiving a call, the green indicator light will be on.
- Emergency Alarm: In standby mode, press the preset [SOS] shortcut key to enable or disable the emergency alarm function.
- Flashlight: In standby mode, press the preset [LAMP] shortcut key or the flashlight icon key to turn the flashlight on or off.
- FM Radio Function: Set the [SK1] key to the radio function via Menu > Radio Set > Press SK1. Turn on the radio and press SK1 [FM Radio] to enter radio mode.
- Use ▲/▼ to search for radio channels at the preset step frequency.
- Press [#↑] to automatically search for radio channels (screen displays 'SeeK..').
- Press [EXIT] to switch frequency band between 65.0/75.0MHz.
- Press SK1 [FM Radio] to exit radio mode.
- Monitor: Press and hold the pre-programmed [Monitor] key to enter monitor mode and listen for weak signals. Release to exit.
- Frequency Search: Press the pre-programmed [SEARCH] shortcut key or hold down the search icon key. The radio enters search state (screen displays "SEARCH...."). Press [#Z] to switch searching band (VHF/UHF, etc.). Frequency and CTCSS/DCS code will be displayed after search. Press [MENU] to save the channel.
- Reverse Frequency Function: Short press the [*] key in relay mode to invert receive and transmit frequencies (screen shows R icon). Useful for repeater channels with frequency differences.
- Talk Around Function: In repeater mode, press [*] to switch between Talkaround Mode and Repeater Mode (screen displays T and R icons). In Talkaround mode, receive frequency equals transmit frequency.
- Repeater Activation Tone: Turn on the radio, press and hold [PTT], then press [SK1] to transmit 1750Hz audio to activate a repeater in hibernation.
- Voice-activated Transmission (VOX): Enables transmission without pressing PTT.
- In Standby, press [MENU] > [2] > [MENU] > [4] to enter Vox Switch.
- Press [MENU] > [2] > [MENU] > [5] to enter Vox Level. Use ▲/▼ to select VOX level (1-9). Smaller value = higher sensitivity. V icon displayed on screen. Default is off.
- To turn off VOX, select OFF OFF.
- Press [MENU] to save.
- Dual Watch: Allows the radio to receive frequencies set for channel A or B.
- Press [MENU] > [2] to enter Radio Set.
- Press [MENU] + ▲/▼ to select "15 Dual Watch".
- Press [MENU] to enter Dual Watch Setting, press ▲/▼ to select "On".
- Press [MENU] to save. 'D' icon displayed. Repeat to select "Off" to disable.
- Stopwatch Function: Press and hold [MENU] to activate. Press [MENU] to start, again to stop. Press [EXIT] to exit.
5.6. Menu Navigation
Using Arrow Keys:
- Press [MENU] to enter the menu.
- Use ▲/▼ buttons or the encoder to navigate.
- Press [MENU] to select an item.
- Use ▲/▼ or encoder to select a parameter.
- Press [MENU] to confirm and save, or [EXIT] to cancel.
- Press [EXIT] at any time to exit the menu.
Using Shortcuts:
- Press [MENU] to enter the menu.
- Use the numerical keypad to enter the menu item number.
- Press [MENU] to access the item.
- Enter the parameter using arrow keys or numerical shortcut code.
- Press [MENU] to confirm and save, or [EXIT] to cancel.
- Press [EXIT] at any time to exit the menu.
6. Wireless Programming
The BAOFENG MINI-5 supports wireless programming via a mobile application, eliminating the need for a computer or programming cables. This allows you to directly adjust frequencies and set parameters from your smartphone.
6.1. Download the OLA Radio App
To program the radio wirelessly, you need to install the OLA Radio APP on your Android or iOS phone. Scan the QR codes below to download the appropriate app:

6.2. Wireless Programming Steps
- On the Radio: Press [MENU] + [4] to enter Wireless CPS. Then press [MENU] + ▲/▼ to select "On". The wireless programming icon will appear on the first line of the screen.
- On the Phone:
- Open the OLA Radio APP.
- Allow Bluetooth and location services on your mobile phone.
- Select the walkie-talkie model "5Rmini Series".
- Click "Walkie-talkie" to connect. A connection success message will appear, and you can return to the home page.
- Read Radio Data: After frequency reading is complete, click "Program" to enter program details. In this interface, you can program channel information, frequency mode, and optional functions.
- Save Profile: The programmed profile can be saved as a new profile with a custom name. If you select "Replace Program", click "Replace Program" and save.
- Write Data to Radio: From the home page, select the program, click "Write" to enter the writing frequency. The radio will automatically restart once the frequency writing is completed.
7. Technical Specifications
| Feature | Specification |
|---|---|
| Brand Name | BAOFENG |
| Model Number | MINI-5 |
| Receiver Frequency | FM 76-108 MHz; VHF 144-146MHz, UHF 430-440MHz; Airband 108-136MHz; NOAA |
| Transmission Frequency | VHF 144-146MHz, UHF 430-440MHz |
| Frequency Range | 108-136MHz (RX), 430-440MHz (RX/TX), 350-390MHz (RX), 400-480MHz (RX/TX), 480-520MHz (RX), 65-108MHz (FM RX), 136-174MHz (RX/TX) |
| Channel Spacing | 25.0KHz (Wide)/12.5KHz (Narrow) |
| Memory Channel | 999 Groups |
| Output Power (W) | 3W-5W (High/Low) |
| Maximum Range | 3km-5km |
| Operation Voltage | DC 7.4 V ±10% |
| Battery Capacity (mAh) | 2200mAh Li-ion |
| Battery Included | Yes |
| Charging | USB Type-C |
| Display | Yes, 1.44” Color LCD |
| Dimensions | 107*52*37mm (Without Antenna) |
| Weight | 212g (Battery pack included) |
| Transmission Current | ≤1600mA |
| Receive Sensitivity | 0.25μV (12dB SINAD) |
| Rated Audio Power Output | 1W @16 ohms |
| Receive Current | ≤380mA |
| Connection for accessories | 2 pin Kenwood jack |
| Antenna Impedance | 50 Ohms |
| Waterproof / Water-Resistant | No |
| Material | Plastic |
| Certification | CE, RoHS, FCC |
NOTE: All specifications may be modified without prior notice or liability.
8. Troubleshooting
If you encounter issues with your BAOFENG MINI-5, please refer to the following common troubleshooting steps:
- No Power: Ensure the battery is fully charged and properly installed. Turn the Volume/Power knob clockwise to power on.
- Cannot Transmit or Receive: Check if the radio is on the correct channel and frequency. Verify that the PTT button is functioning. Ensure the antenna is securely attached. Check if VOX is enabled, which might prevent manual PTT.
- Poor Audio Quality: Adjust the volume. Ensure the microphone is 2.5-5 cm from your mouth during transmission. Check for obstructions around the speaker/microphone.
- Keypad Unresponsive: Check if the keypad lock is enabled (indicated by the "" icon). Press and hold [*] to unlock.
- Programming Issues: If using the APP, ensure Bluetooth is enabled and the app is connected to the radio. Follow the wireless programming steps carefully.
- Battery Drains Quickly: Ensure the battery is fully charged. Reduce transmit power if possible (High/Low setting).
For more complex issues, please consult the full user manual PDF or contact customer support.
9. User Tips
- The MINI-5 offers improved Air Band reception compared to older models like the UV-5R mini.
- While the battery provides good life, it can take a while to fully charge. Plan charging accordingly.
- The radio is very easy to program directly from the keyboard for basic channels.
- Utilize the mobile app for convenient channel configuration and transferring settings, especially for more complex setups.
- The enlarged battery is a significant improvement, offering extended usage while maintaining a compact size.
10. Warranty and Support
For warranty information and technical support, please refer to the official BAOFENG documentation or contact your local dealer. The manufacturer, PO FUNG ELECTRONIC (HK) INTERNATIONAL GROUP COMPANY LIMITED, can be reached via:
- Address: Room 1508, 15/F, Office Tower II, Grand Plaza, 625 Nathan Road, Kowloon, Hong Kong
- Website: http://www.pofungshop.com
- Email: sales@pofungshop.com
The full text of the EU Declaration of Conformity is available at http://www.pofung.cn/download.asp?EnBigClassName=EU%20DOC.
11. Compliance and Environmental Information
11.1. EU Declaration of Conformity
Baofeng and Pofung declare that the radio equipment type MINI-5 is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available via the link provided in the Warranty and Support section.

11.2. Conditions of Use
ATTENTION: Conditions of Use!
The frequency band on which this device operates is administered by limitations and/or permissions for its usage. Consequently, in the EU Countries, operators must consult the entrusted authorities. In particular, they must possess a license or a frequency assigned to them by their respective competent authority.
11.3. Waste Disposal Information
According to Directive 2002/96/CE, 2002/96/CE and 2003/108/CE, relating to the reduction of the use of hazardous substances in electrical and electronic equipment, as well as waste disposal, the symbol of the crossed-out trash can is shown on the equipment. This indicates that the product at the end of its useful life must be collected separately from other waste.

The user must therefore turn off the equipment to avoid the accumulation of waste and return it to the retailer when purchasing a new one of an equivalent type, or dispose of it at specialized waste collection centers. This ensures proper recycling and contributes to environmental protection. Improper disposal may lead to administrative sanctions.