1. Introduction
Thank you for choosing the Botslab 3K 4 Channel Dash Cam G980H. This device is designed to provide comprehensive video surveillance for your vehicle, covering front, rear, and interior views with advanced features like 3K resolution, 560° field of view, night vision, GPS tracking, and smart parking protection. Please read this manual carefully before use to ensure proper installation and operation.
2. Package Contents
Upon opening the package, please verify that all items listed below are included and in good condition:

Image: Diagram showing all items included in the Botslab Dash Cam package.
- 1 x Main unit
- 1 x Rear camera (6.5M cable)
- 2 x 3M Tape
- 1 x Car charger (3.5M cable)
- 1 x 128GB TF Card
- 2 x Electrostatic film
- 1 x Quick Start Guide
- 1 x User manual (this document)
- 1 x Warning Card
- 1 x Installation pry bar
3. Product Appearance
Familiarize yourself with the components of your Botslab Dash Cam G980H:

Image: Front view of the Botslab Dash Cam G980H main unit.
Main Unit Features

Image: Illustrates the 90° rotatable side cameras and the snap-on magnetic design for secure fit.
- Removable Back Panel: For easy installation and removal.
- Camera Lens: Main front camera.
- Settings Button: Access device settings.
- Power Button: Turn the device on/off.
- Mic Button: Control audio recording.
- USB Power Port: For power supply.
- Rear Camera Port: Connects the external rear camera.
- Screen: 3.18" Touch Screen for live view and control.
- TF Card Slot: Supports up to 512GB (128GB TF card included).
Rear Camera

Image: Diagram showing the 560° field of view coverage: Front 170°, Left 120°, Right 120°, Rear 150°.
The rear camera provides a 150° field of view, ensuring comprehensive coverage of the vehicle's rear. It connects to the main unit via a dedicated port.
4. Installation
4.1 Install the Electrostatic Film
Install the electrostatic film on the front windshield in the recommended area (dashed area) shown in the diagram below. Before installation, clean the glass and ensure there are no bubbles between the electrostatic film and the glass.

Image: Diagram illustrating where to paste the electrostatic film on the car windshield.
Tip: Install the dash cam as close to the middle area above the front windshield as possible to ensure full coverage of the car's front view and improve ADAS-assisted driving accuracy.
4.2 Attach the Dash Cam
Remove the 3M adhesive protective film, attach the dash cam bracket to the electrostatic film, and adjust the dash cam to the appropriate angle.
4.3 Wiring and Installation of the Rear Camera
Extend the rear camera cable along the top of the windshield, A-pillar, and roofline, and route it towards the vicinity of the trunk as shown in the diagram.

Image: Diagram showing the recommended routing for the rear camera cable.
4.4 Wiring and Connecting the Power Supply
Route the power cord along the top of the front windshield, through the A-pillar, and into the storage compartment located at the front passenger seat, close to the cigarette lighter port. Then, connect the power cord to the cigarette lighter power supply.
Tip: Use the included wiring pry bar to bury the power cord under the A-pillar sealant strip. The position of the cigarette lighter port may vary between vehicles.
5. ADAS Calibration Guide
To ensure the accuracy of ADAS (Advanced Driver-Assistance Systems), calibration is essential before use. After wiring, the dashcam will power on automatically and start recording. ADAS calibration is required upon first power-up.

Image: Diagram showing the ADAS calibration process with visual cues for alignment.
- Step 1: Adjust the installation position of the dashcam to align the vertical line of ADAS calibration with the centerline of the vehicle as much as possible.
- Step 2: Adjust the camera angle to align the horizontal line with the horizon of the road (the plane where the road meets the distance).
- Step 3: After calibration is complete, ADAS will become effective. For detailed ADAS function triggering conditions and alert content, please refer to the electronic manual.
Important: ADAS functions are for informational purposes only and do not replace your observation of road conditions. Always comply with traffic regulations and drive safely.
6. Operating Instructions
6.1 App Download and Installation
Download the Botslab app to manage your dash cam and view footage.
- Method 1: Scan the QR code below to download and install the app.
- Method 2: Search for "botslab" in major application stores and download the app.

Image: QR code for downloading the Botslab APP.
6.2 Basic Operation
- Touch Screen Control: The 3.18" touchscreen allows for easy control. Swipe, tap, and adjust settings in seconds.
- Switching Camera Views: After powering on, double-tap the screen to switch between different camera views.
- Voice Control: The dash cam supports voice control for hands-free operation (specific commands detailed in the full electronic manual).

Image: Hand interacting with the dash cam's touchscreen display.
6.3 Recording Features
Loop Recording

Image: Illustrates continuous loop recording, ensuring constant coverage.
The dash cam continuously records, overwriting the oldest footage when the memory card is full. This ensures you always have the most recent recordings. Supports up to 512GB (128GB TF card included).
Emergency Recording

Image: Shows G-Sensor activation and 8-second buffered recording for critical moments.
Equipped with a G-Sensor, the dash cam automatically detects sudden shakes or collisions. It locks critical moments, recording 8 seconds before and 52 seconds after an event, ensuring important footage is not overwritten.
6.4 Parking Monitoring (Requires Hardwire Kit)

Image: Diagram for 24/7 Smart Parking Protection, including Sentry Mode, Collision-Detected Recording, and Time-Lapse Recording. Notes hardwire kit required.
With the optional hardwire kit (ASIN: B0DT1633D2), the dash cam provides 24/7 smart parking protection:
- Sentry Mode: Automatically records a 1-minute emergency video when the front camera detects a person up to 5 meters ahead.
- Collision-Detected Recording: Initiates a 1-minute recording upon detecting a collision.
- Time-Lapse Recording: Records 1 frame per second, up to 24 hours, to save storage space while maintaining continuous surveillance.
6.5 GPS Tracking

Image: Illustrates GPS tracking with Google Maps integration, showing a route on a map.
The built-in GPS module tracks your driving route, speed, and location, which can be viewed and integrated with Google Maps via the Botslab app.
6.6 Night Vision

Image: Details night vision capabilities with F1.8 Aperture, 940nm Infrared light, WDR, and 6 Lenses.
The dash cam features enhanced night vision for clear recording in low-light conditions, utilizing F1.8 aperture, 940nm infrared lights, WDR (Wide Dynamic Range), and 6 lenses.
6.7 Faster Data Transfer & Video Editor
5.8 GHz WiFi

Image: Compares 5.8 GHz (10MB/s) and 2.4 GHz (2MB/s) data transfer speeds.
With 5.8 GHz WiFi, enjoy 5X faster video data transfer for easy preview and playback of your recordings. A 1-minute 4K video can be downloaded in approximately 20 seconds.
Built-in Video Editor

Image: Shows the built-in video editor interface within the Botslab App, with sharing options.
The Botslab app includes a built-in video editor, allowing you to easily edit and share vivid moments from your drives directly from your smartphone.
6.8 Fatigue Alert

Image: Illustrates a driver fatigue reminder, suggesting a break after 2 hours of continuous driving.
For safer driving, the dash cam provides a driver fatigue reminder, alerting you to take a break after continuous driving for a set period (e.g., 2 hours).
7. Specifications
The following table outlines the key specifications of the Botslab G980H Dash Cam:
| Attribute | Value |
|---|---|
| Model | G980H-N529-1 |
| Weight | 1.69 pounds (approx. 0.77 kg) |
| Dimensions (W x H x D) | 6.02 x 5.39 x 3.94 inches (approx. 15.29 x 13.69 x 10.01 cm) |
| Power Source | Corded electric |
| Built-in Screen | Yes (Touch Screen) |
| Loop-Cycle Recording Feature | Yes |
| Audio Recorded | Yes |
| NightShot Function | Yes |
| Rear Camera | Yes |
| Original Package | Yes |
| Screen Ratio | 4:3 |
| View angle | 360° (overall coverage) |
| Camera Resolution | 640x480 (Note: Product title indicates 3K, this might be a sub-camera resolution or a general spec. Refer to product description for main camera resolution.) |
| Video Code | AVC |
| Batteries Included | No |
| Max External Memory | 128G (Supports up to 512G, 128G TF card included) |
| Number Of Lenses | 4 |
| Imaging Sensor | OV7670 |
| Pixels | 800Mega |
| Display Size | 3"-5" |
| GPS logger | Internal |
| Battery | Built-in |
| Assembly Mode | Portable Recorder |
| Chipset Manufacturer | HISILICON |
| Frames Per Second | 10 |
| Origin | Mainland China |
| Display | LCD |
| Item Type | Car DVR |
| Color | grey |
8. Maintenance & Care
To ensure the longevity and proper functioning of your dash cam, please observe the following precautions:
- This product is an auxiliary device for safe driving and should not replace driver vigilance.
- Any losses resulting from product malfunctions, data loss, or product usage are not the responsibility of the manufacturer.
- Avoid strong shocks or vibrations, which may damage the product.
- Before cleaning or maintenance, stop using the product.
- Do not use chemical solvents or harsh cleaning agents. Use a soft, dry cloth for cleaning.
- Do not disassemble or modify this product without authorization.
- The normal operating temperature range for this device is between 0°C and 50°C.
- Ensure product usage complies with local laws and regulations.
9. Troubleshooting
If you encounter issues with your dash cam, consider the following:
- Dash Cam Not Powering On: Ensure the power cable is securely connected to both the dash cam and the car's cigarette lighter port. Check the car's power outlet for functionality.
- Recording Issues: Verify that the TF card is properly inserted and has sufficient free space. Check if loop recording is enabled.
- Screen Display Problems: If the screen shows no display or incorrect characters, try restarting the device.
- Button Control Failure: Ensure no physical obstructions are preventing button presses.
- App Connectivity Issues: Ensure your phone's Wi-Fi is enabled and connected to the dash cam's Wi-Fi network. Restart both the dash cam and the app.
- ADAS Malfunctions: Ensure ADAS calibration has been performed correctly. Note that ADAS functions may be limited under low visibility conditions.
For a detailed list of performance faults and troubleshooting steps, refer to the full user manual PDF available at User manual (PDF).
10. User Tips
- Optimal Parking Mode: For reliable 24/7 parking protection, ensure you install the optional hardwire kit. This allows the dash cam to monitor your vehicle even when the engine is off.
- Quick Camera View Switch: Easily switch between different camera views on the dash cam screen by double-tapping it.
- App for Live View: Use the Botslab mobile app to simultaneously preview footage from all four cameras in real-time, offering a comprehensive view of your surroundings.
- Regular Firmware Updates: Periodically check for firmware updates via the Botslab app to ensure optimal performance and access to new features.
11. Warranty & Support
11.1 Warranty Information
- This product comes with a one-year warranty. For warranty service details, please contact your local authorized distributors.
- The warranty period for the power adapter and charger cable is 12 months, and for the built-in battery, it is 6 months.
- Non-electronic accessories are not covered by the warranty.
The warranty may be voided if:
- The product is used with incompatible accessories or not as outlined in the manual.
- The product housing is dismantled or changed without authorization.
- Damage is caused by usage, repair, or maintenance that does not follow the User Manual.
- Damage or malfunction results from unauthorized personal removal, maintenance, or modification of system software.
- Collision, soaking, breaking, or burning of the printed circuit board occurs.
- Cracking or damage to the outer shell, LCD screen, or antenna occurs during use, except for structural or material factors.
- Damage is due to force majeure.
11.2 Product Disposal
This symbol indicates that the product must not be disposed of as household waste. It should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment. For more information, contact your local municipality, disposal service, or the shop where you purchased this product.
11.3 Contact Us

Image: 'Need Help?' graphic with Botslab support channels.
- Website: https://www.botslab.com
- Email: service@botslab.com
- Facebook: @botslabofficial
- Botslab APP: Download the Botslab APP, register, sign in, and navigate to 'Me' > 'Support'.
12. Important Statements
12.1 Personal Information Security
To ensure the safety of you and your family, please make sure that your product is only bound by authorized persons. Botslab will take strict measures to ensure the security of your and your family's information.
12.2 FCC Regulatory Conformance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
12.3 CE DOC
Hereby, Botslab Inc. declares that the radio equipment type G980H-N529-1 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://www.botslab.com
12.4 RF Exposure Information
The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of 20cm between the device and the human body. To comply with RF exposure requirements, it is recommended to use the product while maintaining a distance of 20cm between the device and the human body.
Operation Frequency (Max power):
- Wifi: 2412MHz-2472MHz (<20dBm), 5745MHz-5825MHz (<13.98dBm)
- Bluetooth: 2402MHz-2480MHz (<13dBm)