1. Important Safety Information
WARNING!
This product has a built-in rechargeable lithium-ion battery. Lithium batteries store a large amount of energy, and improper use may cause overheating, fire, explosion, or personal injury.
- Do not disassemble, modify, or repair the battery yourself; this must be done by an authorized professional.
- Do not throw the battery into fire or water. Do not expose the battery to temperatures exceeding 60°C (such as inside a car under direct sunlight or near a heater).
- Do not squeeze, puncture, or drop the battery to avoid subjecting it to excessive external pressure.
- Do not connect the battery's positive and negative terminals with metal objects to avoid short circuits.
- If you notice the battery bulging, leaking, deforming, overheating abnormally, or experiencing a sudden drop in range, stop using it immediately.
- If battery leakage comes into contact with skin or eyes, rinse immediately with water and seek medical attention.
- Keep out of reach of children. If swallowed, seek immediate medical attention.
2. Product Overview
The LANXSTAR B1998 is a versatile 480W mini electric grinder and rotary tool designed for various applications including carving, polishing, grinding, drilling, cutting, and cleaning. It features a powerful pure copper motor and a 6-step variable speed control for precise operation.



3. Setup Instructions
3.1 Initial Charge
Before first use, it is recommended to fully charge the battery to activate its optimal performance.
- Connect the included charging cable to the main unit.
- Connect the other end of the charging cable to a suitable power source.
3.2 Attaching Accessories
The tool features a three-jaw chuck for secure attachment of various bits and accessories. Ensure the accessory is firmly tightened before operation.

Refer to the video below for a demonstration of chuck installation and accessory changes.
3.3 Flexible Shaft Attachment (if included)
For detailed work, a flexible shaft can be attached to the main unit. This extends the reach and provides greater maneuverability.

4. Operating Instructions
4.1 Power On/Off
Press the power button to begin operation. After operation, press the power button again to turn off the tool.
4.2 Speed Adjustment
The tool features a 6-step speed control. Adjust the speed according to the material and the task at hand for optimal results.

4.3 Applications
This versatile tool can be used for a wide range of tasks. Always select the appropriate accessory for the job.



5. Maintenance
5.1 Battery Maintenance and Care
Daily Use Recommendations:
- Charge as needed: Lithium batteries have no memory effect and do not need to be fully discharged before recharging.
- Avoid full discharge: Charge promptly when the battery level drops below 20%. Prolonged undercharging will damage the battery.
- Avoid overcharging: Disconnect the power source immediately after full charge. Overnight charging is not recommended.
Storage Recommendations:
- When not in use for extended periods: It is recommended to maintain the battery level between 40% and 60%. Remove the battery (except for removable internal batteries) and store it in a cool, dry place.
- Storage environment: Temperature -10℃~35℃. Avoid humidity, high temperatures, and direct sunlight.
- Every 3 months: For long-term storage, it is recommended to recharge once to prevent over-discharge damage.
Temperature Precautions:
- Charging environment: Recommended temperature 0℃~35℃. Charging may not be possible below 0°C.
- Usage environment: Avoid prolonged use in environments above 40°C.
- Summer precautions: Do not leave the product in a car exposed to direct sunlight, as high temperatures may damage the battery.
5.2 General Tool Maintenance
- Cleaning: After each use, clean the tool and accessories to remove dust and debris. Use a soft, dry cloth.
- Heat Dissipation: The tool is designed with fast heat dissipation to improve durability. Ensure vents are not blocked during use.

6. Troubleshooting
- Tool not powering on: Ensure the power cable is securely connected and the power outlet is functional. If battery-powered, ensure the battery is charged.
- Reduced performance: Check if the selected accessory is appropriate for the material. Ensure the chuck is tightened correctly. Clean any debris from the tool and accessories.
- Overheating: Stop operation immediately. Allow the tool to cool down. Ensure heat dissipation vents are clear. Avoid prolonged use in high-temperature environments.
- Unusual noise or vibration: Stop operation immediately. Check for loose accessories or internal damage. If the issue persists, discontinue use and contact support.
7. Specifications
| Parameter | Value |
|---|---|
| Product Power | 480W |
| Power Source | AC |
| Voltage | 220V (EU) / 110V (US) |
| No-Load Speed | 5,000 - 30,000 r/min |
| Clamping Range (Chuck) | 0.5 - 6.5 mm |
| Weight | 1.9 kg |
| Speed Control | 6 steps adjustable |
| Power Cord Length | 1.5 m |
| Material | Plastic / Metal |
| Battery Type | Rechargeable Lithium-ion (Built-in) |
| Certification | CE |
| Origin | Mainland China |
8. User Tips
- Start Slow: When beginning a new task or working with a new material, start at a lower speed setting and gradually increase it as needed. This helps prevent damage to the material and the tool.
- Secure Workpiece: Always ensure your workpiece is securely clamped or held to prevent movement during operation, which can lead to inaccurate results or injury.
- Wear Safety Gear: Always wear appropriate personal protective equipment, including safety glasses, gloves, and a dust mask, especially when cutting, grinding, or sanding.
- Use Correct Accessories: Match the accessory type and size to the specific task and material. Using the wrong accessory can lead to poor results or tool damage.
- Keep it Clean: Regularly clean the tool and accessories to maintain optimal performance and extend their lifespan. Dust and debris can hinder operation and cause wear.
9. Compliance and Support
9.1 Compliance Statement
This product complies with the essential requirements of relevant EU directives and bears the CE mark.

9.2 Manufacturer Information
ShenZhen Tungfull Digital Technology Co., Ltd
China, Shenzhen Guangdong Province
A302, Building 25, Hong ChaoYuan, ChangFa Mid Road, BanTian
Subdistrict, LongGang District, ShenZhen, 518000
Contact: 86-15089309815, deng0124@163.com
9.3 Additional Resources
This manual is intended to provide general guidance. Actual operation must be based on actual site conditions and professional electrical standards. We reserve the right to update this manual as needed for product improvements; the latest version can be downloaded from our website.
A PDF version of the user manual is available for download: User Manual (PDF)