1. Important Safety Instructions
WARNING! Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. Save all warnings and instructions for future reference.
1.1. General Safety
- Work Area Safety: Keep the work area clean and well-lit. Do not operate power tools in explosive atmospheres. Keep children and bystanders away.
- Electrical Safety: Power tool plugs must match the outlet. Never modify the plug. Avoid body contact with grounded surfaces. Do not expose power tools to rain or wet conditions. Use an RCD (Residual Current Device) for outdoor use.
- Personal Safety: Stay alert and use common sense. Do not operate while tired or under the influence. Use personal protective equipment (safety glasses, dust mask, hearing protection). Prevent accidental starting. Remove any adjusting key or wrench before turning the tool on. Do not overreach; maintain proper footing and balance. Dress properly; avoid loose clothing and jewelry.
1.2. Power Tool Use and Care
- Do not force the power tool. Use the correct power tool for your application.
- Do not use the power tool if the switch does not turn it on and off.
- Disconnect the plug from the power source and/or remove the battery pack before making any adjustments, changing accessories, or storing power tools.
- Store idle power tools out of the reach of children.
- Maintain power tools and cutting tools. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool's operation.
- Use the power tool, accessories, and tool bits in accordance with these instructions, taking into account the working conditions and the work to be performed.
1.3. Battery Tool Use and Care
- Recharge only with the charger specified by the manufacturer.
- Use power tools only with specifically designated battery packs.
- When the battery pack is not in use, keep it away from other metal objects that could make a connection from one terminal to another.
- Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, seek medical help.
1.4. Service
- Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
2. Product Overview
Familiarize yourself with the components of your HILDA Electric Nail Gun before use.
Figure 1: Product Components
1. Light Switch, 2. Handle, 3. USB Charger Port, 4. Switch Trigger, 5. LED Indicator, 6. Safety Striker, 7. Magazine Latch
3. Setup
3.1. Charging the Battery
- Connect the Type-A end of the charging cable to a power supply (e.g., USB wall adapter).
- Insert the Type-C end of the charging cable into the USB Charger Port (3) on the nail gun.
- The LED Indicator (5) will turn red during charging.
- Once fully charged, the LED Indicator (5) will turn green.
- Charging typically takes about 3-5 hours.
Important Charging Notes:
- Ensure the charging cable is not knotted or severely bent.
- The charger may generate heat during charging; this is normal.
- Charge the battery when the tool's performance noticeably decreases. Do not continue to use a discharged tool as it may reduce battery life.
- Avoid overcharging; do not charge for longer than the specified time.
- Recharge the battery at least once every 3 months during storage to maintain performance.
- Do not charge in environments below 0°C or above 45°C.
3.2. Installing Nails/Staples
Always ensure the power switch is in the