1. Product Overview
The AULA SC380 Pro is a high-performance gaming mouse featuring tri-mode connectivity (Wired, 2.4G Wireless, Bluetooth), a precise PAW3311 sensor with up to 12000 DPI, and a lightweight design for extended gaming sessions. It comes with a magnetic charging base that also offers RGB lighting effects and additional USB/Type-C ports.
Package Contents:
- AULA SC380 Pro Gaming Mouse
- Magnetic Charging Base
- USB Wireless Receiver (2.4G)
- Type-C to USB Charging Cable
- User Manual
Figure 1: AULA SC380 Pro Gaming Mouse and Charging Base Set (Black and White models shown)
2. Setup and Connection
2.1 Mouse Layout
Familiarize yourself with the mouse buttons and features:
- Left Button
- Right Button
- Scroll Wheel Button
- Forward Key
- Backward Key
- DPI Adjustment Key
- Mode Switch (located on the bottom: Wired/OFF, 2.4G, BT)
- Mode Indicator/DPI Indicator Light
- Type-C Port (front of mouse)
- Charging Base Metal Contact Plates (bottom of mouse)
2.2 Charging the Mouse
The mouse is equipped with a 300mAh rechargeable lithium battery. It is recommended to fully charge the mouse before first use.
- Via Charging Base: Place the mouse onto the magnetic charging base. Ensure the metal contact plates on the mouse align with those on the base. The base will illuminate, and the mouse indicator light will show charging status.
- Via Type-C Cable: Connect the provided Type-C cable to the mouse's front port and the other end to a USB power source. The mouse will automatically switch to wired mode and begin charging.
Indicator Status during Charging:
- Low Battery: Indicator flashes red.
- Charging: Indicator light will be on (color depends on current mode).
- Fully Charged: Indicator light turns off.
Figure 2: AULA SC380 Pro Gaming Mouse (White) on its RGB magnetic charging base, showing Type-C port and USB port for multi-functional interface.
2.3 Connection Modes
The AULA SC380 Pro supports three connection modes: Wired, 2.4G Wireless, and Bluetooth (BT).
2.3.1 Wired Mode
Connect the mouse to your computer using the provided Type-C to USB cable. The mouse will automatically switch to wired mode and is ready for use. This mode also charges the mouse.
2.3.2 2.4G Wireless Mode
- Locate the mode switch on the bottom of the mouse and slide it to the 2.4G position.
- Insert the USB wireless receiver into an available USB port on your computer.
- The mouse indicator light will flash green slowly, indicating it's attempting to connect. Once connected, the indicator light will turn solid green.
- Manual Code Matching (if connection fails): Long press the Scroll Wheel Button for 2 seconds. The bottom indicator light will flash red. Then, re-insert the receiver into the USB port.
2.3.3 Bluetooth (BT) Mode
- Locate the mode switch on the bottom of the mouse and slide it to the BT position.
- Press and hold the DPI Adjustment Key for 3 seconds. The mouse indicator light will flash blue rapidly, indicating it's in pairing mode.
- On your computer or mobile device, open Bluetooth settings and search for new devices. Select