HB Toys R4301-R4312

Contents

HB Toys 1:43 RC Crawler Instruction Manual

Model Series: R4301-R4312

Brand: HB Toys (also known as MJX R/C Technic)

1. Introduction

1.1 Product Composition

This product package typically includes the main RC vehicle, a remote controller, a rechargeable battery pack (for some models), a charger (for some models), an operating instructions manual, and certificates. Please verify all accessories are present and undamaged upon unpacking. Contact your dealer or the after-sales service department if any items are missing or damaged.

1.2 Applicable Age

This product is suitable for individuals aged 14 years and above.

1.3 Product Features

  • Multi-channel Remote Control: Supports various operations including forward, backward, left turn, right turn, acceleration (on some models), and stunt actions (on some models). Offers flexible control and quick response.
  • High-Quality Material: Constructed from environmentally-friendly and fall-resistant ABS engineering plastic. Features a smooth surface, no burrs, bright colors, and resistance to fading, ensuring user safety.
  • Long Battery Life: Equipped with a large-capacity rechargeable battery (for some models), allowing for 20-30 minutes of continuous use after a full charge. Actual battery life may vary slightly depending on the specific model and usage.
  • Safety Design: Utilizes a low-voltage power supply system to minimize electric shock risks. The 2.4G remote control signal is stable, providing an effective control distance of 20-50 meters in obstacle-free environments, preventing the toy from going out of range.

2. Safety Warnings

  • ⚠️ Not suitable for children under 36 months.
  • Recommended age: 14+ years.
  • Do not mix different brands, models, or old and new batteries to avoid battery leakage, short circuits, and potential damage to the remote controller or vehicle.
  • Always ensure battery compartment covers are tightly closed to prevent batteries from falling out during use.
  • Disconnect the charger from the power supply and the vehicle immediately after charging is complete to prevent overcharging and damage to the battery.
  • Dispose of discarded batteries properly according to environmental protection regulations; do not discard them with household waste.

3. Package Contents

3.1 What's Included

The following items are typically included in your package:

  • Main RC Vehicle
  • Remote Controller
  • Rechargeable Battery Pack (for some models)
  • Charger (for some models)
  • Operating Instructions Manual
  • Certificates
  • Spare Car Shell (for some models)
  • Nut Wrench (for some models)
  • Spare Tire (x2, for some models)
  • USB Cable (for some models)
  • Original Box

3.2 Visual Reference and Dimensions

Refer to the images below for a visual representation of the package contents and the vehicle's dimensions.

RC Car package contents including vehicle, remote, and accessories
Image: Included accessories such as the RC car, remote controller, USB cable, spare tire, nut wrench, and instruction manual.
RC Car box and vehicle dimensions with charger diagram
Image: Box dimensions (21.5cm x 13.5cm x 17cm) and vehicle dimensions (5cm x 12cm x 5cm). Also shows the charger diagram and remote controller.

4. Specifications

FeatureDetail
Brand NameHB Toys (MJX R/C Technic)
Model SeriesR4301-R4312
Scale1:43
TypeRC Car, 4WD Crawler, Off Road Vehicle
Dimensions (approx.)5cm (Height) x 12cm (Length) x 5cm (Width)
MaterialPlastic, ABS
Tire MaterialSoft Rubber
Power SourceLithium battery (vehicle), AA batteries (remote)
State of AssemblyReady-to-Go (RTR)
Remote ControlYes, 2.4Ghz
Control Range20-50 meters (in obstacle-free environment)
Recommended Age14+ years

5. Setup Guide

5.1 Remote Controller Battery Installation

  1. Open the battery compartment cover located on the back of the remote controller.
  2. Install three AA (No. 5) alkaline batteries, ensuring correct polarity as marked (+ and -) inside the compartment. (Batteries are typically not included and must be purchased separately).
  3. After confirming correct battery installation, securely close the battery compartment cover, ensuring the buckle is fully engaged to prevent batteries from dislodging.
  4. Note: Do not mix different brands, models, or old and new batteries to avoid battery leakage, short circuits, and potential damage to the remote controller.

5.2 RC Vehicle Power Supply Installation

The vehicle supports two power supply methods, depending on your specific model. Please follow the instructions relevant to your product.

Method 1: Rechargeable Battery Pack (for models with included rechargeable battery)

  1. Open the battery compartment of the RC vehicle.
  2. Load the rechargeable battery pack into the compartment, ensuring correct polarity.
  3. Close the battery compartment cover securely.
  4. Connect the output end of the charger to the charging interface on the vehicle. Connect the input end of the charger to a household 220V AC power supply. The charger's indicator light will illuminate, indicating charging has begun.
  5. Charging typically takes 2-3 hours. The indicator light on the charger will change from red to green (on some models) once charging is complete. Disconnect the power supply immediately after charging to prevent overcharging and potential battery damage.
  6. The rechargeable battery pack is designed for recycling. If the vehicle's speed noticeably slows down or it fails to start normally, it indicates insufficient power and requires recharging.

Method 2: Ordinary Batteries (for models without included rechargeable battery)

  1. Open the battery compartment of the RC vehicle.
  2. Load the appropriate number of AA (No. 5) or AAA (No. 7) alkaline batteries according to the polarity markings inside the compartment.
  3. Close the battery compartment cover securely. Replace batteries promptly when power is low.
  4. Dispose of used batteries properly according to environmental regulations.
Charger diagram for RC car battery
Image: Diagram illustrating the charger connection to the RC car's battery compartment.

5.3 Remote Control Pairing

  1. Turn on the power switches for both the remote controller and the RC vehicle. The indicator light on the remote controller will illuminate, and the vehicle may emit a startup prompt tone (on some models), indicating it is powered on.
  2. Wait for 3-5 seconds. The remote controller and the RC vehicle will automatically complete the pairing process. Once paired, the vehicle can be controlled by the remote.
  3. If pairing fails, turn off both devices and try the pairing process again. Ensure that the batteries in both the remote and vehicle have sufficient power.

6. Operating Instructions

The remote controller features a user-friendly design with a clear button layout for simple operation. The specific functions are detailed below (referencing a remote control car example; other models may have similar controls).

6.1 Direction Control

  • Forward Key: Press and hold to move the vehicle forward at a constant speed. Release to stop.
  • Back Key: Press and hold to move the vehicle backward at a constant speed. Release to stop.
  • Turn Left Key: Press and hold to turn the vehicle left. Can be combined with the Forward key for left-front driving. Release to resume straight movement.
  • Turn Right Key: Press and hold to turn the vehicle right. Can be combined with the Forward key for right-front driving. Release to resume straight movement.
  • Stop Button (some models): Press to immediately stop all actions and enter standby mode.

6.2 Function Keys (for some models)

  • Acceleration Key: Press once to switch the vehicle to high-speed driving mode. Press again to return to normal speed.
  • Trick Key: Press to execute preset stunt actions (e.g., rotation, drift, overturning). The vehicle will automatically return to its normal driving state after completing the action.
  • Lighting/Sound Effect Key: Press to toggle the vehicle's lighting and sound effects on or off, enhancing the play experience.

7. Maintenance

  • Cleaning: Regularly wipe the vehicle and remote controller with a soft, dry cloth. Avoid using water or chemical cleaners, which can damage electronic components.
  • Battery Care: For rechargeable batteries, ensure they are fully charged before storage if not used for extended periods. Remove all batteries from both the vehicle and remote controller if storing for a long time to prevent leakage.
  • Storage: Store the RC vehicle and its accessories in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Inspection: Periodically check for any loose screws, damaged parts, or worn tires. Replace or repair as necessary.

8. Troubleshooting

  • Vehicle not responding to remote control: Ensure both the vehicle and remote controller are powered on. Check if batteries in both devices are correctly installed and have sufficient charge. Re-attempt the pairing process (Section 5.3).
  • Vehicle moving slowly or inconsistently: The battery in the vehicle may be low and require recharging (Method 1) or replacement (Method 2).
  • Vehicle not performing stunt actions: Ensure your model is equipped with the 'Trick Key' function. Check battery levels.
  • Remote control indicator light not on: Replace the AA batteries in the remote controller.

9. User Tips

  • Usage Environment: This RC car is highly recommended for indoor
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.