Introduction
The GL-iNET Brume 3 (GL-MT5000) is a high-performance wired VPN security gateway designed for homes and small offices. It integrates Deep Packet Inspection (DPI) control, robust multi-WAN connectivity, and advanced security features to protect your network and ensure seamless operation. With VPN speeds up to 1,100 Mbps, it offers exceptional performance for remote work, gaming, and personal use. The Brume 3 features a modern design with convenient Type-C power input, making it a powerful and cost-effective networking solution.
Setup Guide
Follow these steps to set up your GL-MT5000 VPN Security Gateway:
- Power Connection: Connect the provided Type-C power adapter to the 'POWER 5V=3A' port on the device and plug it into a power outlet.
- WAN Connection: Connect your internet source (e.g., modem or existing router) to the 'WAN 2.5G' Ethernet port using an Ethernet cable.
- LAN Connection: Connect your devices (e.g., computer, gaming console) to the 'LAN 1 2.5G' or 'LAN 2 2.5G' Ethernet ports using Ethernet cables.
- Initial Access: Once powered on, the device will boot up. Refer to the GL.iNet official documentation for initial web interface access and configuration details. Typically, you will connect a computer to a LAN port and navigate to a default IP address in a web browser.
Operating Instructions
The GL-MT5000 offers a range of advanced features for network management and security:
- High-Speed VPN: Experience secure and fast VPN connectivity with support for WireGuard (up to 1100Mbps) and OpenVPN-DCO (up to 1000Mbps) via Ethernet. The device supports OpenVPN, WireGuard, Cloudflare, and IPv6.
- Multi-WAN Support: Utilize the tri-port 2.5GbE design for flexible WAN/LAN configurations, including dual-ISP Multi-WAN for redundancy and failover, ensuring continuous internet access. USB tethering for 4G networks is also supported.
- DPI Security & Traffic Control: Benefit from enterprise-grade security with Deep Packet Inspection (DPI) for auto-filtering threats and manual block control. A real-time dashboard provides full network visibility, monitoring device and application usage, and tracking 7-day traffic trends.
- Intelligent QoS: Prioritize network traffic to ensure critical applications receive the necessary bandwidth for optimal performance.
- Stealth VPN Obfuscation: Disguise VPN traffic to bypass detection and blocking by firewalls or network monitoring systems, ensuring stable and discreet connections in restricted environments.
- OpenWrt 21.02: The device runs on OpenWrt 21.02 (Kernel 5.4.281), offering extensive customization and control over your network.
- USB 3.0 Data Port: Use the USB 3.0 port for external storage (NAS) or other peripherals, expanding the device's functionality.
Maintenance
- Firmware Updates: Regularly check the GL.iNet official website for the latest firmware updates to ensure optimal performance, security, and access to new features.
- Ventilation: Ensure the device is placed in a well-ventilated area to prevent overheating. Avoid covering the ventilation slots.
- Cleaning: Keep the device and its ports clean and free from dust. Use a soft, dry cloth for cleaning.
- Reset Button: A reset button is available for restoring the device to factory default settings. This should be used with caution as it will erase all configurations. Consult the official documentation for the correct reset procedure.
Troubleshooting
- No Internet Connection:
- Check all cable connections (power, WAN, LAN) to ensure they are secure.
- Verify that your modem or upstream router is working correctly and providing an internet signal.
- Restart the GL-MT5000 and your modem/router.
- Slow VPN Speed:
- Ensure your internet service provider (ISP) speed is adequate for your VPN usage.
- Try connecting to a different VPN server location.
- Check for any background applications consuming bandwidth.
- Device Unresponsive:
- Disconnect and reconnect the power adapter.
- If the issue persists, consider performing a factory reset using the reset button (refer to Maintenance section).
Specifications
| Feature | Detail |
|---|---|
| Interface | 1 x WAN Ethernet port (2.5G), 2 x LAN Ethernet ports (2.5G), 1 x USB 3.0 port, 1 x Type-C power port, 1 x Reset button |
| CPU | MediaTek, Quad-core @2.0GHz |
| Memory / Storage | DDR4 1GB / eMMC 8GB |
| Ethernet Speed | 10/100/1000/2500Mbps |
| Power Input | Type-C, 5V/3A |
| Power Consumption | <5W |
| Operating Temperature | 0 ~ 40°C (32 ~ 104°F) |
| Storage Temperature | -20 ~ 70°C (-4 ~ 158°F) |
| Dimension | 75 x 92 x 25mm / 148g |
User Tips
- Region-Specific Firmware: Be aware that some units might be shipped with firmware intended for specific regions (e.g., "CHI" version for China). If you encounter unexpected limitations or language barriers, you may need to manually flash a global firmware version. Consult the official GL.iNet forums or support for guidance on this process, as it may require advanced technical knowledge.
- OpenWrt Customization: For advanced users, the OpenWrt operating system provides extensive customization options. Explore the OpenWrt documentation and community forums to unlock the full potential of your device, including installing additional packages and configuring advanced network settings.
Warranty and Support
The GL-iNET Brume 3 (GL-MT5000) typically comes with a 2-year warranty. For detailed warranty information, technical support, and access to the latest documentation and firmware, please visit the official GL.iNet website. You can also find community forums and FAQs that may assist with common issues and advanced configurations.