1. Introduction
The EFT E420P is a professional-grade drone frame kit designed for agricultural spraying and plant protection. This kit provides the essential structural components, including the frame, a 20L liquid medicine tank, and an AS150U battery board. It is important to note that this product is a drone frame set and does not include a complete, ready-to-fly drone. Users will need to integrate additional components such as motors, propellers, flight controller, and other electronics to build a functional spraying drone. This manual will guide you through the assembly, operation, and maintenance of the EFT E420P frame kit.

2. Package Contents
Upon receiving your EFT E420P Drone Frame Kit, please verify that all components listed below are present and in good condition.
- EFT E420P Frame: 1 Pcs
- Liquid Medicine Tank (20L capacity): 1 Pcs
- Battery Board (20L/1.5mm, with AS150U connector): 1 Pcs
- Assembly hardware and accessories (e.g., landing gear, arm mounts, screws)

3. Setup and Assembly
The EFT E420P is designed for easy assembly, featuring an integrated drone body and distribution board. Follow these general steps for assembly. Refer to the provided video for a visual guide.
- Unpack Components: Carefully remove all parts from the packaging.
- Assemble Frame Arms: Attach the carbon fiber arms to the main frame body. Ensure all connections are secure. The frame features a classic fold design for portability.
- Install Landing Gear: Secure the landing gear to the frame.
- Mount Liquid Medicine Tank: Install the 20L liquid medicine tank to the underside of the frame. Ensure it is firmly attached and the inlet is accessible. The tank features an enlarged inlet for easy filling.
- Integrate Battery Board: Install the AS150U battery board within the designated area, ensuring proper connection points for power. The integrated distribution board helps keep wires organized and avoids signal interference.
- Connect Power Plug: Utilize the reinforced power plug for secure and stable power connections.
- Attach Optional Camera Mount: If using, install the detachable camera mount for convenient assembly and disassembly.
- Install Motors and Propellers: (User-supplied components) Mount your chosen motors and propellers to the arms.
- Install Flight Controller and Electronics: (User-supplied components) Integrate your flight controller, GPS, and other necessary electronics.


4. Operating Instructions
Once your EFT E420P drone is fully assembled with all necessary electronic components and calibrated, it is ready for operation. This frame is designed for autonomous flying spray applications.
- Pre-Flight Check: Before each flight, ensure all components are securely fastened, the liquid medicine tank is properly filled (if applicable), and the battery is fully charged and connected via the AS150U connector.
- Flight Planning: Use your flight control software to plan the spraying route. The E420P is suitable for precision farming applications.
- Take-off and Spraying: Initiate autonomous flight. The drone will follow the pre-programmed route, dispensing liquid medicine as configured.
- Monitoring: Continuously monitor the drone's flight and spraying operation.
- Landing: Ensure a clear landing area and initiate autonomous landing or manual control for a safe return.

5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your EFT E420P drone frame.
- Cleaning: After each use, especially after spraying, clean the liquid medicine tank and the UV waterproof cover. The waterproof cover is designed for easy cleaning.
- Frame Inspection: Periodically inspect the frame for any signs of damage, cracks, or loose connections. Tighten any loose screws.
- Electrical Connections: Check the reinforced power plug and all connections to the integrated distribution board for corrosion or wear.
- Arm Mechanism: Ensure the classic fold mechanism of the arms operates smoothly and locks securely.
- Storage: Store the drone frame in a clean, dry place away from direct sunlight and extreme temperatures.
6. Troubleshooting
This section addresses common issues you might encounter with the drone frame. For issues related to flight performance or electronic components, refer to the manuals of your specific motors, flight controller, and other integrated systems.
| Problem | Possible Cause | Solution |
|---|---|---|
| Loose frame components | Vibration during operation, improper initial assembly | Inspect all screws and fasteners. Tighten as necessary. Ensure proper torque during assembly. |
| Liquid tank leakage | Improper installation, damaged seal, loose cap | Verify tank installation and ensure all seals are correctly seated. Check the cap for tightness. Replace damaged components if necessary. |
| Difficulty folding/unfolding arms | Debris in hinge mechanism, damaged hinge | Clean the folding mechanism. If damaged, contact support for replacement parts. |
7. Specifications
Key specifications for the EFT E420P Drone Frame Kit are provided below.
| Feature | Detail |
|---|---|
| Wheelbase | 1462mm |
| Tank Capacity | 22L |
| Frame (net weight) | 5.14kg |
| Tank (net weight) | 1.88kg |
| Expanded Size | 1954*1954*663mm |
| Folded Size | 713*713*663mm |
| Color Options | Red / White |
| Recommended Motor | X9 Plus 36inch |
| Recommended Battery | 14S 22000mAh |
| Arm Diameter | 40mm |




8. User Tips
- Frame Kit Only: Remember that the EFT E420P is a frame kit. It requires additional components (motors, flight controller, battery, etc.) to become a fully functional drone. Plan your build accordingly.
- Component Compatibility: Ensure all additional components you purchase are compatible with the E420P frame, especially regarding motor size (recommended X9 Plus 36inch), battery type (recommended 14S 22000mAh), and arm diameter (40mm).
- Secure Connections: Always double-check all connections, especially power and signal wires, to prevent disconnections during flight. The integrated distribution board and reinforced power plug are designed for reliability, but user verification is crucial.
9. Support and Contact Information
For technical support, inquiries about parts, or any other assistance, please contact us using the information below.
- WhatsApp: +86 13530811198
- Tel: +86 13530811198
- Email: uav111@163.com
