iPEGA PG-9023S Extendable Bluetooth Game Controller

1. Introduction

The iPEGA PG-9023S is a wireless Bluetooth game controller designed for a wide range of devices, including Android and iOS tablets, smartphones, PCs, and Nintendo Switch. It features a telescopic design that can extend to fit devices from 5 to 10 inches. With Bluetooth 5.0 wireless transmission, it offers a stable connection up to 8 meters without requiring complex drivers.

This manual provides detailed instructions for setting up, operating, and maintaining your PG-9023S controller.

2. Setup

2.1. Charging the Controller

Connect the controller to a 5V power supply using the provided Micro-USB cable (e.g., PC USB port or mobile phone power adapter). The charging process is indicated by the 'CHARGE' LED:

• Low Power: The 'CHARGE' indicator flashes quickly.
• Charging: The 'CHARGE' indicator flashes slowly.
• Fully Charged: The 'CHARGE' indicator remains steadily on.

A full charge typically takes approximately 3 hours.

2.2. Power On/Off

• Power On: Press and hold the 'HOME' button for approximately five seconds until the LED red light flashes slowly. The controller will automatically attempt to pair with the last connected device. If connection fails, it will automatically shut down.
• Power Off: Press and hold the 'HOME' button for 3 seconds until the Bluetooth LED turns off.

2.3. Pairing Modes

To change the controller's function mode, first turn off the controller and cancel any existing Bluetooth pairings. Then, follow the steps for the desired mode:

Automatic Reconnection: If the controller was previously connected, pressing the 'HOME' button directly will cause the 'SEARCH' indicator to flash slowly and automatically reconnect.

3. Operation

3.1. Key Functions Overview

• L1/L2 & R1/R2: Shoulder buttons.
• Left Joystick: Analog stick for movement/control.
• Arrows Key (D-Pad): Directional input.
• SELECT / HOME / START: System and menu navigation buttons.
• Right Joystick: Analog stick for camera/aiming.
• A/B/X/Y: Action buttons.
• Multimedia keys: Volume -, Previous song, Play/Pause, Next song, Volume + (available in Android Standard mode).

3.2. Game Compatibility

The controller supports a wide range of games and simulator games under Android, including popular titles like MC4, Wild Blood, Dungeon Hunter, Zombie, FC simulator, GBA emulator, arcade emulator, N64 emulator, Shadowgun, Sonic CD, Cordy, Soulcraft, Zenonia4, 9 Innings2013, and Riptide.

For iOS, search for 'iCade' in the App Store. Compatible games include Gunman Clive, Helium Boy, League of Evil, Muffin Knight Free Stardash, and Temple Run.

3.3. Mapping Game Buttons (Direct Play Mode)

For advanced button mapping or resetting game buttons to default, download and install the "Shooting Plus V3" app from your device's app store. This app allows you to remap game buttons and adjust their positions on screen.

3.4. SPP Mode Usage (for virtual keys)

This mode is for systems with virtual game keys. To use SPP Mode:

1. Go to Settings → Language and input → Select Input Method "GHTouch IM".
2. Open the application "GHTouch" → Choose device "ipega Extending Game Controller" → Check "virtual screen buttons".
3. Select Input Method "GHTouch IM". The device will automatically connect with the controller.
4. After entering a game, press the volume up button on the device or the 'Select' button on the controller to display button icons on the screen. Double-click an icon to set its size.

Important: For iOS systems, ensure you switch the input method to English before pairing. Otherwise, the controller may not function correctly.

4. Maintenance

• Storage: Do not store the product in wet or high-temperature environments.
• Care: Avoid dropping, hitting, piercing, or attempting to disassemble the product to prevent damage.
• Battery Safety: The product has a built-in battery. Do not dispose of it with general waste. Do not charge the controller near fire or other heat sources.

5. Troubleshooting

• Connectivity Issues: A small fraction of mobile phones, particularly those with MediaTek platforms, may not support this device due to system compatibility issues.
• Game Compatibility Issues: Due to official game platform software upgrades or source code changes, some games may become unplayable or unable to connect with the gamepad.
• Automatic Shutdown: The gamepad will automatically turn off if there is no operation for 60 minutes. To restart, press the 'HOME' button to wake it up and reconnect.
• iOS Input Method: If the controller is not working properly with an iOS device, ensure the input method was switched to English before pairing.

6. Specifications

• Model: PG-9023S
• Size: L 237 x W 125 x H 60 mm
• Weight: 253 ±5g
• Working Voltage: DC3.7V
• Working Current: <15 mA
• Standby Current: <15uA
• Working Hours: >15 hours
• Charging Voltage / Current: DC5V/500mA
• Charging Hours: 3 hours
• Bluetooth Version: 5.0
• Transmission Distance: < 8M
• Battery Capacity: 400 mAh
• Standby Time: Up to 40 days (once fully charged)
• Telescopic Stand: Supports 5-10 inch devices

7. Warranty and Support

Non-professional personnel should not disassemble the product. Disassembly will void the after-sales warranty service.

For a detailed user manual in PDF format, please refer to the official document: User Manual (PDF).

8. User Tips

• Device Orientation: When using the controller with a device, ensure the device is placed horizontally and the 'HOME' key on the controller is positioned to the right for optimal gameplay.
• Game Settings: Always restore game buttons to their default settings if you experience unexpected behavior.
• Reconnecting: If the controller was previously paired, a quick press of the 'HOME' button will often initiate an automatic reconnection.
• Changing Modes: To switch between different pairing modes, always power off the controller and cancel any existing Bluetooth pairings before attempting to activate a new mode.