1. Product Overview
This CAN Bus decoder is specially designed for the installation of aftermarket Android head units. Its core function is to read and parse vehicle CAN bus data, providing data support for the installation, debugging, and function adaptation of Android head units.
2. Specifications
The Raise G-RZ-FD61 CAN Bus Decoder is designed to integrate aftermarket Android head units with your vehicle's CAN bus system. Below are its key specifications:
| Attribute | Value |
|---|---|
| Model Name | RZ-FD61 |
| Special Features | CAN Bus Data Converter |
| Brand Name | pinmany |
| Manufacturer | Raise |
| Item Type | Cables, Adapters & Sockets |
| Material | Black plastic shell |
| Item Weight | 35g |
| Item Size | 45mm*40mm*18mm |
| Voltage | 12 V (Operating: 9V-16V DC) |
| Interface | PH2.0-20pin |
| Operating Temperature | -30°C ~ +70°C |
| Suitable Head Unit | Android 7'/9'/10'/etc (with UART interface) |
| Suitable Car Models | Ford Fiesta 2009-2018 |
3. Setup Instructions
This section details the steps for connecting and configuring your RZ-FD61 CAN Bus Decoder with an Android head unit.
3.1 Pre-Installation Considerations
- This product does not include cables. You will need to prepare the corresponding adapter harnesses.
- The CAN Bus box is only compatible with Android head units that have an 8-pin connector and support serial communication (TX/RX).
- Wiring requires professional knowledge. Please strictly follow the provided pin definition chart.
- If you are unsure about fitting, contact support before purchase.
3.2 Wiring Instructions
Connect the CAN Bus decoder to the cable harness. It is crucial to follow the pin definitions precisely to prevent damage to the device.
| Pin No. | Pin Definition | Wiring Instructions |
|---|---|---|
| 1 | GND | Connect to the vehicle's power negative or body ground |
| 2 | BATT | Connect to the vehicle's 12V power positive |
| 3 | CAN_H | Connect to the vehicle's multimedia CAN bus high line |
| 4 | CAN_L | Connect to the vehicle's multimedia CAN bus low line |
| 5 | NC | No wiring required, leave idle |
| 6 | ACC_OUT | Connect to the Android head unit's ACC IN |
| 7 | NC | No wiring required, leave idle |
| 8 | REV_OUT | Connect to the Android head unit's reverse signal |
| 9 | SWC | Connect to the vehicle's steering wheel button signal line |
| 10 | ILL_OUT | Connect to the Android head unit's ILL |
| 11 | NC | No wiring required, leave idle |
| 12 | NC | No wiring required, leave idle |
| 13 | UART_RX | Connect to the Android head unit's UART_TX interface |
| 14 | UART_TX | Connect to the Android head unit's UART_RX interface |
| 15 | NC | No wiring required, leave idle |
| 16 | NC | No wiring required, leave idle |
| 17 | LIN | Connect to the vehicle's multimedia LIN bus line |
| 18 | NC | No wiring required, leave idle |
| 19 | NC | No wiring required, leave idle |
| 20 | NC | No wiring required, leave idle |
Warning: When wiring, please strictly follow the pin definition, and never reverse or misplug to avoid device damage.
3.3 Connecting the CAN Bus Box
- Find the 20-pin CAN plug of your wiring harness.
- Plug it into the 20-pin socket of the CAN Bus Box.
3.4 Android Head Unit Settings
After physical wiring, configure the Android head unit to recognize the CAN Bus Decoder. The exact steps may vary by head unit model.
- Enter Settings: Navigate to the main settings menu on your Android head unit.
- Access Factory Settings: Look for a "Factory" or "Car Settings" option. You may need a password. Common passwords include: 3368, 1617, 8317, 8888. If these do not work, consult your head unit vendor.
- Enter CAN Bus Settings: Within the factory settings, find the "CAN bus settings" or similar option.
- Select CAN Bus Box Manufacturer: Choose "Raise" as the CAN Bus Box manufacturer.
- Select Correct Car Model: Select "Ford" and then "Fiesta 2009-2018" from the list.
- Save and Reboot: Save your settings and reboot the head unit for changes to take effect.
4. Operating Instructions
Once properly installed and configured, the RZ-FD61 CAN Bus Decoder will enable communication between your Ford Fiesta's CAN bus system and your Android head unit. This allows the head unit to access and display vehicle data and control certain functions.
- Automatic Data Transfer: The decoder automatically reads and parses vehicle CAN bus data.
- Function Adaptation: Depending on your Android head unit's capabilities and the vehicle's CAN node data, functions such as steering wheel controls, reverse signals, and illumination may be adapted.
- Head Unit Interface: Interact with vehicle data and controls directly through your Android head unit's interface.
5. Maintenance
The RZ-FD61 CAN Bus Decoder is designed for maintenance-free operation. However, consider the following for optimal performance and longevity:
- Keep Dry: Ensure the device is installed in a dry environment, away from moisture and liquids.
- Temperature: Operate within the specified temperature range of -30°C to +70°C.
- Secure Connections: Periodically check that all wiring connections are secure and free from corrosion.
- Cleaning: If necessary, gently wipe the exterior with a dry, soft cloth. Do not use harsh chemicals or solvents.
6. Troubleshooting
If you encounter issues with your RZ-FD61 CAN Bus Decoder, refer to the following troubleshooting steps:
- Problem: Android head unit does not recognize CAN Bus data or functions are not working.
- Check Wiring: Verify all connections according to the wiring instructions (Section 3.2). Ensure no wires are reversed or misplugged.
- Verify Power: Confirm the decoder is receiving proper 9V-16V DC power.
- Head Unit Settings: Double-check that the CANBUS function is enabled and the correct manufacturer ("Raise") and car model ("Ford Fiesta 2009-2018") are selected in your Android head unit's settings (Section 3.4).
- Head Unit Compatibility: Ensure your Android head unit has a UART interface and supports serial communication.
- Firmware Update: If the head unit cannot find the correct vehicle name, try selecting a similar one or contact the Android head unit seller for an APP update.
- Vehicle CAN Data: Confirm that your vehicle's multimedia CAN node provides the necessary data for the desired functions. Some functions may not be available if the vehicle does not output the data.
- Problem: Device is physically damaged or not powering on.
- Voltage Check: Ensure the input voltage is within the 9V-16V DC range. Incorrect voltage can cause damage.
- Inspect for Damage: Check for any visible signs of physical damage to the decoder or its connectors.
- Professional Assistance: If the device is damaged due to incorrect wiring or voltage, it may not be covered by warranty. Seek professional assistance for repair or replacement.
If problems persist after following these steps, please contact customer support for further assistance.
7. User Tips
- Professional Installation Recommended: Due to the complexity of automotive wiring and CAN bus systems, professional installation is highly recommended to avoid damage to the decoder or vehicle electronics.
- Verify Head Unit Compatibility: Before purchasing, always confirm that your Android head unit explicitly supports external CAN Bus decoders and has the necessary UART interface.
- Backup Settings: If possible, back up your Android head unit's settings before making any changes to the CAN Bus configuration.
8. Warranty and Support
Damage to the device caused by reverse connection, incorrect insertion, or wiring not in accordance with the pin definition is not covered by the warranty.
For any compatibility or adaptability issues during use, please contact customer service for solutions.
This manual will be updated with product upgrades. If the actual operation is inconsistent with the manual, the actual function of the product shall prevail. Our company reserves the right of final interpretation.
Manufacturer: Raise
Brand: pinmany
Contact: Please refer to your purchase platform or seller's contact information for support.
