NEJE N30610

Contents

NEJE N30610 Laser Module User Manual

Model: N30610

1. Introduction

This manual provides detailed instructions for the safe and effective use of your NEJE N30610 Laser Module. The NEJE N30610 is a versatile 450nm laser head with TTL/PWM modulation, designed for DIY engraving and cutting projects on various materials. Please read this manual thoroughly before operation.

2. Safety Precautions

WARNING: Laser radiation can be hazardous. Improper use can result in serious injury.

  • Always wear appropriate laser safety goggles during operation. Never look directly into the laser beam.
  • Avoid direct contact of the laser with your eyes and skin.
  • Do not engrave or cut reflective materials, as the laser beam can reflect and cause damage or injury.
  • Be aware of fire hazards. Laser engraving/cutting can generate heat and ignite flammable materials. Always supervise the machine during operation and have fire extinguishing equipment nearby.
  • Keep pets and children away from the operating area.
  • Ensure adequate ventilation when operating indoors, as burning materials can produce smoke and fumes.

3. Package Contents

Verify that all items are present in your package:

  • 1 x NEJE N30610 Laser Module
  • 1 x Interface Adapter Board
  • Connection Cables (as supplied)
NEJE Module Kit components including laser module, control board, and cables.
Figure 3.1: NEJE Module Kit components.

4. Specifications

FeatureSpecification
ModelNEJE Module N30610
Input Power15W
Laser Output Power2.5W (2500mW)
Wavelength445-450nm
Luminous ColorBlue
Laser DiodeOsram 2.2W 5.6mm (Maximum power 5.6mm laser diode)
LD Current1.6A
Beam ShapeDot (Focusable)
Heatsink MaterialAircraft Aluminum + Brass Shell
Section Size30mm x 30mm
Cooling Mode20mm copper core + Heat Sink Groove + Thermal silicone grease + 10000 rpm cooling fan
Dimension60 * 30 * 30mm
Adapter Output VoltageDC 12V 2A
Input Voltage (Module)DC 12V
TTL & PWM ModulationYes, Compatible with Both TTL & PWM Modulation
PWM/TTL InputDC3.3V-12V
Input InterfacePH2.0-4Pin (+,-, PWM/TTL, Temperature), 3Pin (+,-, PWM/TTL), 2Pin+2Pin (+,-) + (PWM/TTL,-)
Drive ModeExternal ACC
Safe Temperature Range<70 ℃
Module Weight115g
Life Time20,000 hours
Max Cutting & Carving Depth8mm
Cutting Speed (3mm plywood, with air assist, clear edge)120mm/min at 100% power from 2 passes
CertificationCE, RoHS, UL
Detailed specifications table for NEJE N30610 Laser Module.
Figure 4.1: NEJE N30610 Laser Module detailed specifications.
Dimensional drawing of the NEJE N30610 Laser Module.
Figure 4.2: Dimensional drawing of the laser module.

5. Setup

Follow these steps to set up your NEJE N30610 Laser Module:

  1. Mounting: Securely attach the laser module to your CNC machine, laser engraving machine, or DIY setup. Refer to your machine's specific mounting instructions. An exploded view of a mounting bracket is shown below for reference.
  2. Connections: Connect the laser module to the interface adapter board using the provided cables. The module supports PH2.0-4Pin (+,-, PWM/TTL, Temperature), 3Pin (+,-, PWM/TTL), or 2Pin+2Pin (+,-) + (PWM/TTL,-) interfaces. The temperature interface can be disconnected if not required for your setup.
  3. Power Supply: Connect the adapter output (DC 12V 2A) to the interface board.
  4. Software Setup: Ensure your control software (e.g., for CNC, Arduino) is configured to send appropriate TTL/PWM signals (DC3.3V-12V) to the laser module.
Exploded view of the NEJE N30610 Laser Module with a mounting bracket.
Figure 5.1: Exploded view of the laser module with mounting components.
NEJE N30610 Laser Module showing pinout for 12V, GND, PWM, and Temperature (C).
Figure 5.2: Laser module pinout diagram.

6. Operating Instructions

Before starting any engraving or cutting task, always ensure you are wearing safety goggles and have proper ventilation.

  1. Focus Adjustment: The laser module features a focusable dot beam. Adjust the focal length by rotating the lens until the laser dot on your material is as small and sharp as possible. This is crucial for optimal engraving and cutting results.
  2. Material Placement: Place the material to be processed on a stable, non-flammable surface. Ensure it is flat and securely positioned.
  3. Positioning: Use your machine's controls to position the laser module over the desired starting point on your material.
  4. Initiate Operation: Start the engraving or cutting process through your control software.

The NEJE N30610 is suitable for engraving and cutting a variety of materials:

  • Engravable Materials: MDF, Balsa, Paper, Wood, Fabric, Plastic, Leather, Plywood, Foam Paper, Anodized Aluminum.
  • Non-Engravable Materials: Metal, Glass, Stone, Ceramics, PCB, Stainless Steel, Reflective Material, Transparent Material.
Diagram showing laser module engraving on wood with focus distance and max depth.
Figure 6.1: Engraving depth diagram for wood, showing a maximum depth of 1.5mm at a 40mm distance.
Table showing material compatibility for marking, carving, and cutting with the NEJE N30610 laser module.
Figure 6.2: Material compatibility chart.
Collage of various materials engraved with the NEJE laser module, including wood, leather, and metal tags.
Figure 6.3: Examples of engraving on different materials.

Operation Demonstration Video

Video 6.1: This video demonstrates the basic operation of a laser engraving machine with the NEJE N30610 module. It shows the power-on sequence, automatic reset, setting the box position for engraving, starting the engraving process, and the built-in rollover detection safety feature. Examples of metal and wood engraving are also shown, highlighting the high quality and speed of the process.

7. Maintenance

  • Cleaning: Regularly clean the lens and the fan to ensure optimal performance and prevent overheating. Use a soft, lint-free cloth and appropriate lens cleaning solution if necessary.
  • Temperature Monitoring: The module has a built-in temperature sensor. Ensure the operating temperature remains below 70°C to prolong the life of the laser diode.
  • Do Not Disassemble: Do NOT dismantle the laser module without official permission. Unauthorized disassembly will void the warranty and may cause irreparable damage.
Exploded view of the laser module showing internal cooling components and temperature sensor.
Figure 7.1: Internal components highlighting the built-in drive, temperature sensor, and high-efficiency cooling.
Graph showing PWM versus current for the laser module.
Figure 7.2: PWM-VS-Current graph.
Diagram illustrating how to calculate temperature and a related circuit diagram.
Figure 7.3: Temperature calculation formula and circuit diagram.

8. Troubleshooting

  • Laser Stops Working (Rollover Detection): The module has a built-in sensor to prevent laser damage. If the machine is accidentally touched or moved during operation, the laser will stop working to prevent potential hazards. Reset the machine and restart the process.
  • Poor Engraving/Cutting Quality: Check the laser focus. A sharp, small dot is essential. Ensure the material is clean and flat. Adjust power and speed settings in your software according to the material type.
  • Overheating: If the module feels excessively hot, check that the cooling fan is operating correctly and is free from obstructions. Ensure the ambient temperature is within reasonable limits.
  • Connection Issues: Verify all cables are securely connected to the laser module and the control board.

For complex operational problems, providing a video and detailed description of the issue to customer support can greatly assist in diagnosis and resolution.

9. User Tips

  • Test Settings: Always perform small test engravings or cuts on scrap material before starting your main project to fine-tune power and speed settings.
  • Material Preparation: For best results, ensure your materials are clean and free of dust or debris.
  • Software Familiarity: Take time to understand your engraving software's features and settings to maximize the module's capabilities.
  • Air Assist: For cutting thicker materials or achieving cleaner cuts, consider using an air assist system to blow away debris and cool the cutting area.

10. Warranty and Support

The NEJE N30610 Laser Module comes with a one-year warranty. This warranty covers manufacturing defects but excludes damage caused by improper use, such as operating the laser module for more than 30 minutes continuously without adequate cooling, or unauthorized disassembly.

If you encounter any quality problems or require technical assistance, please contact our customer service. Do not attempt to repair or dismantle the laser module without explicit permission, as this will void your warranty.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.