MEKEDE BMW 2 Series F45 F46 F87

Contents

MEKEDE Android 14 Wireless CarPlay Auto Dual BT Car Multimedia Player User Manual

For BMW 2 Series F45 F46 F87 (2013-2019)

1. Introduction

Thank you for choosing the MEKEDE Android 14 Wireless CarPlay Auto Dual BT Car Multimedia Player. This manual provides detailed instructions for the proper installation, setup, operation, and troubleshooting of your new car multimedia system. Please read this manual thoroughly before installation and use to ensure optimal performance and to avoid any potential issues.

2. Safety Information

  • Ensure the vehicle is turned off and the battery is disconnected before beginning installation.
  • Improper installation can lead to damage to the device or vehicle. If you are unsure about any steps, seek professional assistance.
  • Do not operate the device in a way that distracts you from driving. Always prioritize road safety.
  • Avoid exposing the device to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
  • Only use accessories and parts specified by the manufacturer.

3. Package Contents

Verify that all items listed below are included in your package:

Diagram showing all components included in the package.
Figure 3.1: Package Contents
  1. Main Machine (Multimedia Player)
  2. Power Cable
  3. RCA Cable
  4. 4G Antenna
  5. WiFi Antenna
  6. USB Cable
  7. GPS Antenna
  8. MIC and connector
  9. AUX Cable
  10. 4G SIM card slot
  11. Speaker

4. Product Overview

The MEKEDE Multimedia Player features a QLED Full-fit Screen with 1920*720 resolution, powered by a Snapdragon 680 8-Core processor. It supports Android 14, Wireless CarPlay, Android Auto, Dual Bluetooth, 4G LTE, and WiFi. The unit is designed for seamless integration with your BMW 2 Series F45, F46, F87 (2013-2019) while retaining original car functions.

MEKEDE Android 14 Wireless CarPlay Auto Dual BT Car Multimedia Player for BMW 2 Series F45 F46 F87
Figure 4.1: MEKEDE Multimedia Player installed in a BMW dashboard
Video 4.1: Product demonstration showing UI navigation, music playback, video playback, Bluetooth pairing, and UI theme changes.

4.1 Machine Interface

The rear of the main unit features various ports for connection:

  1. Power Cord Interface: For connecting the main power harness.
  2. RCA Cable or 360 Cable Interface: For video input from external cameras or 360 panoramic systems.
  3. External SIM card slot cable interface: For 4G LTE connectivity.
  4. USB Cable Interface: For connecting USB devices.
  5. NC (Not Connected): Unused port.
  6. External microphone interface: For connecting an external microphone.
  7. NC (Not Connected): Unused port.
  8. LVDS Cable Interface: Connects to the LVDS cable removed from the original car screen.
  9. GPS antenna interface: For connecting the GPS antenna.
  10. 4G antenna interface: For connecting the 4G antenna.
  11. WiFi antenna interface: For connecting the WiFi antenna.

4.2 Cable Instructions

The package includes various cables for installation:

  1. Power cord
  2. VIDEO RCA cable
  3. MIC External microphone cable
  4. USB cable
  5. SIM External SIM card cable
  6. GPS antenna
  7. 4G antenna
  8. WiFi antenna
  9. Audio connection cable

5. Installation Instructions

5.1 Wiring Method of the Power Cord

For EVO Systems:

Transfer the power cord from the original car CD player to the new power harness. Plug the new harness into the Android device.

For CCC/CIC/NBT Systems:

Transfer the power cord from the original car CD player to the new power harness. Ensure proper connection points. Plug the new harness into the Android device.

Important Note on Optical Fiber Cable:

If your original vehicle's CD player power cord plug has an optical fiber cable, it must be moved to the power cord plug of the Android device. Pay close attention to the position and direction of the optical fiber cable during this transfer to ensure proper functionality.

Wiring diagram for solving no sound problem, showing optical fiber cable transfer and AUX connection.
Figure 5.1: Wiring for sound, including optical fiber cable transfer and AUX connection.

5.2 Camera Setting and Wiring Method

For Original Car Camera or Original Car 360 Camera:

Navigate to

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.