COOSPO BC26S

Contents

CooSpo BC26S Wireless GPS Bike Computer User Manual

Model: BC26S

Introduction

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your COOSPO BC26S Wireless GPS Bike Computer. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.

COOSPO BC26S Bike Computer and Speed/Cadence Sensor

Image: COOSPO BC26S Bike Computer and Speed/Cadence Sensor.

Package Contents

Verify that all items are present in your package:

  • BC26S Bike Computer
  • USB Type-C Charging Cable
  • Bike Computer Mount
  • User Manual (this document)
Diagram of BC26S accessories including bike computer, USB cable, mount, and user manual

Image: BC26S accessories including bike computer, USB cable, mount, and user manual.

Setup Guide

1. Charging the Device

Before first use, fully charge the BC26S using the provided USB Type-C cable and a DC 5V power adapter. The device provides up to 20 hours of continuous battery life in GPS-enabled mode after each charge.

BC26S charging port (Type-C)

Image: BC26S charging via Type-C port.

2. Installing the Bike Computer

Follow these steps to install the BC26S on your bicycle handlebar:

  1. Place the mount base on the handlebar.
  2. Secure the mount using the provided rubber bands or zip ties.
  3. Align the BC26S with the mount and twist it clockwise until it locks into place.

3. Connecting to Bluetooth Sensors

The BC26S is compatible with various cycling sensors such as heart rate monitors, speed sensors, and cadence sensors. Ensure your Bluetooth sensor is active (e.g., wear heart rate strap properly, rotate pedals/wheels for speed/cadence sensors).

Diagram showing heart rate strap and speed/cadence sensor placement for Bluetooth connection

Image: Proper placement for heart rate strap and activation of speed/cadence sensors for Bluetooth connection.

To connect sensors:

  1. Long press the Settings button (⚙) to enter Settings Mode.
  2. Short press the Right button (▶‖) to enter P1 Sensor Settings. The computer will search for nearby Bluetooth sensors.
  3. Once a sensor is found, long press the Settings button (⚙) to save and return, or short press the Right button (▶‖) to save and move to the next setting.
  4. If no sensor is found, the computer will automatically exit Settings Mode.

Note: If you have multiple Bluetooth sensors, keep the ones you are not connecting at a distance or turn them off to ensure the bike computer connects to the correct sensor.

4. Timezone Setting

  1. Long press the Settings button (⚙) to enter Settings Mode.
  2. Short press the Down Left button (↓) to switch to P2 Timezone Setting.
  3. Short press the Right button (▶‖) to enter the setting.
  4. Use the Up Left button (↑) and Down Left button (↓) to switch numbers, and the Right button (▶‖) to switch between digit positions.
  5. After setting, long press the Settings button (⚙) to save and return, or short press the Right button (▶‖) to save and move to the next setting.

5. Wheel Size Setting

Setting the correct wheel size is crucial for accurate speed and distance measurements if you are not using a GPS-enabled speed sensor.

  1. Long press the Settings button (⚙) to enter Settings Mode.
  2. Short press the Down Left button (↓) to switch to P3 Wheel Size Setting.
  3. Short press the Right button (▶‖) to enter the setting.
  4. Use the Up Left button (↑) and Down Left button (↓) to switch numbers, and the Right button (▶‖) to switch between digit positions.
  5. After setting, long press the Settings button (⚙) to save and return, or short press the Right button (▶‖) to save and move to the next setting.

Common Tire Sizes and Circumferences (mm)

Tire SizeCircumference (mm)Tire SizeCircumference (mm)Tire SizeCircumference (mm)
12 × 1.7593524 × 2.00192526 × 1.402005
14 × 1.5102024 × 2.125196526 × 1.502010
14 × 1.75105526 × 1.75202327 × 12145
16 × 1.5118526 × 1.95205027 × 1-1/82155
16 × 1.75119526 × 2.00205527 × 1-1/42161
18 × 1.5134026 × 2.10206827 × 1-3/82169
18 × 1.75135026 × 2.125207027.5 × 1.752114
20 × 1.75151526 × 2.35208327.5 × 2.1252174
20 × 1-3/8161526 × 3.00217027.5 × 1.52074
22 × 1-3/8177026 × 7/8192027.5 × 1.952146
22 × 1-1/2178526 × 1(59)191329 × 2.12288
24 × 1175326 × 1(65)195229 × 2.22298
24 × 3/4 Tubular178526 × 1.25195329 × 2.32326
24 × 1-1/8179526 × 1-1/81970650 × 35A2090
24 × 1-1/4190526 × 1-3/82068650 × 38A2125
24 × 1.75189026 × 1-1/22100650 × 38B2105
700 × 18C2070700 × 19C2080700 × 20C2086
700 × 23C2096700 × 25C2105700 × 28C2136
700 × 30C2170700 × 32C2155700C Tubular2130
700 × 35C2168700 × 38C2180700 × 40C2200
700 × 42C2224700 × 44C2235700 × 45C2242
700 × 47C2268

6. Unit Settings

  1. Long press the Settings button (⚙) to enter Settings Mode.
  2. Short press the Down Left button (↓) to switch to P4 Unit Settings.
  3. Short press the Right button (▶‖) to enter the setting.
  4. Use the Up Left button (↑) and Down Left button (↓) to switch between metric (km/h) and imperial (mph) units.
  5. After setting, long press the Settings button (⚙) to save and return, or short press the Right button (▶‖) to save and move to the next setting.

7. Alert Settings (Max Speed Alert)

You can set a maximum speed alert value. When your cycling speed exceeds this value, the BC26S will emit a beep sound.

  1. Long press the Settings button (⚙) to enter Settings Mode.
  2. Short press the Down Left button (↓) to switch to P5 Max Speed Alert.
  3. Short press the Right button (▶‖) to enter the setting.
  4. Use the Up Left button (↑) and Down Left button (↓) to adjust the number, and the Right button (▶‖) to switch between digit positions.
  5. After setting the value, use the Up Left button (↑) and Down Left button (↓) to toggle the alert sound ON/OFF.
  6. After setting, long press the Settings button (⚙) to save and return.
BC26S displaying a speed alert notification

Image: BC26S displaying a speed alert notification with "Beep-Beep" text.

8. Connecting to CoospoRide App

The CoospoRide App allows you to easily set up the BC26S, sync cycling data for analysis, and get firmware updates. Download the app from Google Play or the App Store.

Warning: Do NOT pair the bike computer in your phone's system Bluetooth settings. Use the CoospoRide App for pairing.

To connect:

  1. Turn on the bike computer.
  2. Enable Bluetooth on your phone and grant necessary permissions to the CoospoRide App.
  3. In the CoospoRide App, navigate to: Me > Devices > Add Devices > Bike Computer > BC26S.
  4. Select the device ID to connect.

Note: Before connecting, ensure Bluetooth is on and the app has permissions. Some phones may not detect the device if permissions are restricted. After connecting, the app will automatically sync bike computer data.

CoospoRide App interface for settings, data analysis, and firmware updates

Image: CoospoRide App interface showing settings, data analysis, and firmware update options.

CoospoRide App interface for syncing data to Strava

Image: CoospoRide App interface demonstrating syncing activity data to Strava.

Operating Instructions

1. Button Functions

IconButtonFunction
↑Up LeftShort Press: Switch Data Type / Switch Value
Long Press: Lap (during riding)
↓Down LeftShort Press: Switch Value
Long Press: Enter / Exit Settings Mode
▶‖RightShort Press: Power On / Start Riding / Pause Riding / Confirm Current Setting
Long Press: Power Off / End Riding

2. Display Icons

IconDescription
☰Battery Level
☰☰☰GPS Searching
☰☰☰☰GPS Signal Normal
▶‖In Motion
‖‖Manual Paused
AUTOAuto Paused
📱App Connected
09:38Time
MAXMax Data
AVGAverage Data
LAPLap Count
📄History
🔊 / 🔇Alert Sound On/Off
💨Speed
❤Heart Rate
⚙Cadence
▲Current Speed Above or Equal to Average
▼Current Speed Below Average

3. GPS Positioning

The BC26S features dual GPS positioning for precise tracking. After turning on, it will automatically search for GPS signals. Once fixed, you can start riding.

  • For the first GPS fix, wait 30-90 seconds in an open outdoor area. The device date and time will be set automatically.
  • To get the best satellite signal, keep the bike computer still while acquiring GPS.
  • Bad weather or dense forests can affect GPS signal acquisition. Stay in an open area for 3-5 minutes for better signal.
  • If riding starts without a successful GPS fix and no speed sensor is connected, speed data will show as "---".
BC26S with dual GPS positioning satellites

Image: BC26S displaying GPS data with global positioning satellites.

4. Starting and Ending a Ride

  1. After GPS is fixed, short press the Right button (▶‖) to start riding.
  2. Short press the Right button (▶‖) again to pause the ride.
  3. Long press the Right button (▶‖) to power off the device and end the ride.

Note: The bike computer can store approximately 70 hours of ride data. When memory is full, the oldest records are overwritten.

5. Ride Data Display Settings

You can customize the data displayed on the screen:

  • Short press the Up Left button (↑) to cycle through data displayed on the upper screen.
  • Short press the Down Left button (↓) to cycle through data displayed on the lower screen.

6. Other Functions

  • Time Setting: The device automatically calibrates time via GPS. You can also sync time with the CoospoRide App.
  • Auto Backlight: The backlight remains on between half an hour before sunset and half an hour after sunrise. At other times, it turns off after 15 seconds of inactivity.
  • Auto Sleep / Power Off:
    • If not connected to the app and riding hasn't started, it powers off after 5 minutes of inactivity.
    • If riding has started without app connection, it enters sleep mode after 15 minutes of inactivity.
    • When connected to the app, the bike computer will not automatically power off.

Maintenance

  • Keep the device clean and dry. Wipe with a soft, damp cloth if necessary.
  • Do not use abrasive cleaners or solvents.
  • Avoid extreme temperatures and direct sunlight for prolonged periods.
  • Do not open or modify the product.
  • Do not disassemble or attempt to service this product.
  • Ensure the Type-C charging port cover is securely closed to maintain waterproof integrity.

Troubleshooting

  • Sensor Connection Issues: If the computer fails to find sensors, ensure they are active and within range. If you have multiple sensors, temporarily move others away or turn them off to avoid interference.
  • GPS Signal Loss: Ensure you are in an open outdoor area for GPS acquisition. Dense forests or bad weather can interfere with the signal.
  • Incorrect Speed/Distance: Verify your wheel size setting (P3) if not using a speed sensor. Ensure external speed sensors are properly paired and functioning.
  • Device Powers Off Unexpectedly: Check if the device is connected to the CoospoRide App. If not, it may auto-power off after 5 minutes of inactivity (no riding started) or enter sleep mode after 15 minutes (riding started).
  • Data Sync Issues: Ensure your phone's Bluetooth is enabled and the CoospoRide App has all necessary permissions. Do not pair the device via your phone's system Bluetooth settings.
  • Interference: This device complies with FCC rules. If interference occurs, try reorienting the receiving antenna, increasing separation from other equipment, or connecting to a different circuit.
  • Device Malfunction: If the product is operating improperly and troubleshooting steps do not resolve the issue, please contact COOSPO support.

Specifications

FeatureDetail
Brand NameCOOSPO
ModelBC26S
Wireless TransmissionBluetooth
Display Size2.3 inches LCD Screen
Auto BacklightSupported
PositioningGPS & BeiDou (Dual GPS)
Battery Capacity600 mAh
Battery LifeUp to 20 hours (GPS-enabled mode)
MaterialPC/ABS + TPU
Dimensions (L*W*H)73.7*48.8*20.4 mm
WeightApprox. 51 g (including battery, excluding mount)
History RecordsViewable in CoospoRide App (approx. 70 hours storage)
Compatible SensorsSpeed, Cadence, Heart Rate sensors (Bluetooth)
OriginMainland China
CertificationCE
Package Length15 cm
Package Width14 cm
Package Height4 cm
Package Weight0.198 kg

User Tips

  • For the most accurate GPS data, ensure the device has a clear view of the sky and remain stationary for 30-90 seconds during the initial GPS fix.
  • Always use the CoospoRide App for pairing and managing your BC26S to avoid connectivity issues. Do not use your phone's native Bluetooth settings for pairing.
  • Regularly sync your ride data to the CoospoRide App to keep track of your progress and free up device memory.
  • Keep the Type-C charging port cover sealed when not charging to maintain the device's waterproof rating.

Warranty and Support

For technical support, warranty claims, or general inquiries, please contact COOSPO directly:

Disclaimer

The information contained in this manual is for reference only. The product described may be subject to alteration due to ongoing research and development without prior announcement. COOSPO shall not be liable for any direct or indirect, accidental, or special damages, losses, and expenses arising from or in connection with this manual or the contained product.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

IC Warning

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Important Safety Information:

  • Do not open or modify the product.
  • Do not disassemble or attempt to service this product.
  • This product is safe under normal and reasonably foreseeable operating conditions.
  • If product is operating improperly, call COOSPO support.
  • Product must be returned to the manufacturer for any service or repair.
  • Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.