BENINCA YNG111

Contents

BENINCA TO.GO VA/WV Series Remote Control Instruction Manual

Model: YNG111

1. Product Overview

The BENINCA TO.GO VA/WV series remote control (Model YNG111) is designed for operating electric gates and garage doors. It features rolling code technology for enhanced security and operates at a frequency of 433.92MHz. This manual provides instructions for its proper setup, operation, and maintenance.

BENINCA TO.GO VA/WV Remote Control
Figure 1: BENINCA TO.GO VA/WV Remote Control (Example of multiple units)

The remote control is available in 2-button and 4-button configurations, compatible with TO.GO 2VA, TO.GO 4VA, TO.GO 2WV, and TO.GO 4WV systems. It comes with a pre-installed battery.

Two BENINCA remote controls, one with two buttons and one with four buttons
Figure 2: Two-button and Four-button Remote Control Variants

2. Specifications

FeatureDetail
Model NumberYNG111
Number of Buttons2 / 4
Encoding MethodRolling Code
Frequency433.92MHz
MaterialABS
BatteryIncluded
Working Range10m-100m (open space)
Programming TypeReceiver Programming
CertificationCE, FCC, RoHS, WEEE

3. Setup and Compatibility

3.1 Compatibility Check

This remote control is compatible with BENINCA TO.GO 2VA, TO.GO 4VA, TO.GO 2WV, and TO.GO 4WV models. It is crucial that your existing remote control model and frequency match the specifications of this product (433.92MHz, rolling code). Incompatible models will not work.

Image showing compatible BENINCA remote control models: 2VA, 4VA, 2WV, 4WV, with a note about requiring access to the receiver.
Figure 3: Compatible BENINCA Remote Control Models

Important: Access to your receiver/opener is required for programming. Please ensure you have this access before attempting setup.

3.2 Incompatible Models

This remote control is NOT compatible with other brands or specific BENINCA models such as TO.GO-A, TO.GO 4AS, TO.GO 2AS, TO.GO 2AK, TO.GO 4QV, TO.GO-4A, and TO.GO 4AK. Using an incompatible remote will prevent proper function.

Image showing several BENINCA remote control models marked as 'NOT COMPATIBLE' with a red line through them.
Figure 4: Incompatible BENINCA Remote Control Models

3.3 Mode Switching (VA to WV / WV to VA)

If your original remote control is a VA series (2VA, 4VA) and you purchased a WV series remote, or vice-versa, you may need to switch the remote's operating mode. Detailed instructions for this process are included in the package. The VA and WV series remotes are compatible with each other, provided the mode is correctly set.

Image illustrating compatibility between 2VA-4VA and 2WV-4WV remote controls, noting that mode switching may be required.
Figure 5: VA and WV Series Compatibility and Mode Switching

4. Programming Instructions

To program your new BENINCA remote control to your gate or garage door opener, follow these steps:

  1. Access the Receiver: Locate the radio receiver or door operator unit. You will need to access its "learn button" or "code button".
  2. Initiate Learning Mode: Briefly press the "learn button" or "code button" on the radio receiver or door operator. The LED indicator on the operator will light up, indicating it is in learning mode.
  3. Transmit Code: While the operator's LED is lit, press and hold the desired button on your new remote control.
  4. Confirm Programming: Continue holding the remote button until the LED on the operator starts to flash and then turns off. Release the button.
  5. Test Remote: The remote control is now coded to the operator. Test its functionality by pressing the programmed button to ensure it operates your gate or garage door.

If you encounter difficulties during programming, please refer to the English manual included in your package or contact customer support for a usage video.

5. Operating the Remote Control

Once programmed, operating your BENINCA remote control is straightforward:

  • Open/Close: Press the programmed button on the remote control to open or close your electric gate or garage door.
  • Stop Function: For some systems, pressing the button again during operation may stop the gate/door. Refer to your gate/door opener's manual for specific functions.

6. Maintenance

6.1 Battery Replacement

The remote control comes with a battery included. When the remote's range decreases significantly or it stops responding, the battery may need replacement. Refer to the included English manual for specific instructions on how to open the remote and replace the battery.

6.2 General Care

  • Keep the remote control dry and away from extreme temperatures.
  • Avoid dropping the remote control or subjecting it to strong impacts.
  • Clean the remote control with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.

7. Troubleshooting

  • Remote not working after programming:
    • Ensure your original remote control model and frequency (433.92MHz) are identical to the product's specifications. Incompatible remotes will not function.
    • Verify that the programming steps were followed correctly. Repeat the programming process if necessary.
    • Check if the remote control's mode (VA or WV) matches your receiver. If your original remote is VA and you purchased a WV remote (or vice-versa), you must switch the mode as per the detailed instructions in the package.
    • Ensure you have proper access to the receiver/opener and its learn button.
    • Check the battery in the remote control. Replace if necessary.
  • Reduced operating range:
    • Replace the remote control's battery.
    • Ensure there are no obstructions between the remote control and the receiver.
    • Environmental factors or interference can affect range.
  • Still experiencing issues?

    If you are unable to resolve the issue, please contact customer support. They can provide further assistance, including sending a learning video in your local language if needed.

8. User Tips

  • Always keep the included English manual for future reference.
  • If you are unsure about any step, especially programming or mode switching, do not hesitate to contact the seller for a detailed usage video or further guidance.
  • Before purchasing, double-check that your existing remote control's model and frequency precisely match the product description to avoid compatibility issues.

9. Support

For any issues or questions regarding your BENINCA remote control, please contact the seller's customer service. They are available to assist with:

  • Problems encountered during product usage.
  • Product quality concerns.
  • Omissions or incorrect items in your delivery.

The seller aims to provide satisfactory solutions within an agreed timeframe.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.