PaiPaitek PD 523V-1

Contents

PaiPaitek PD 523V Dog Training Collar User Manual

Model: PD 523V-1

1. Introduction

Thank you for purchasing the remote dog training collar PD 523V. This product has been tested to meet stringent quality standards and is covered by a 12-month warranty from the date of original purchase. For any issues, please contact us with your order ID and problem or issue, and we will respond within 24 hours.

This warranty is void if the defect is caused by accidental damage, misuse, abuse, neglect, improper repair or alteration by unauthorized persons, or a failure to follow operating instructions provided with the product. This warranty does not apply to normal wear and tear or commercial use. In no event shall liability exceed the purchase price paid by the purchaser of the product. Under no circumstances shall there be liability for any loss - direct, indirect or incidental - or consequential damage arising out of, or in connection with the use of the product.

2. Safety Instructions

Training collars are used to train dogs and not for punishment. Use properly with care and the collar can be a safe and effective tool to train. Building communication and strengthening your bond with your best friend. Obey all safety messages that follow this instruction to avoid possible injury.

  • If your dog has heart disease, high blood pressure, cerebral thrombosis, skin allergies, etc., please do not use it.
  • Do not expose to extreme heat or store at temperatures above 113°F (45°C).
  • Please always keep the dog training collar out of reach of children.
  • Avoid leaving the collar on the dog for more than 18 hours per day.
  • If possible, please reposition the collar on the dog's neck every 1 to 2 hours.
  • The charging rubber cap must be closely covered when your dog is swimming or the receiver will get broken when getting into water from the interface. Taking off the receiver is recommended.

3. Package Contents

The PD 523V dog training collar system comes in different configurations:

PD 523V-1 (For 1 dog)

  • 1 x Remote Transmitter
  • 1 x Receiver
  • 1 x Collar Strap
  • 1 x USB Charging Cable
  • 1 x User Manual

PD 523V-2 (For 2 dogs)

  • 1 x Remote Transmitter
  • 2 x Receivers
  • 2 x Collar Straps
  • 1 x USB Charging Cable
  • 1 x User Manual

PD 523V-3 (For 3 dogs)

  • 1 x Remote Transmitter
  • 3 x Receivers
  • 3 x Collar Straps
  • 1 x USB Charging Cable
  • 1 x User Manual

4. Specifications

FeatureDescription
ModelPD 523V
FunctionTraining Dogs
Working ModesBeep, Vibration, Beep & Vibration
Vibration Levels1-100 Levels
Net WeightRemote Transmitter: 50g, Receiver: 50g
Channels3 Channels
Remote Range1000m / 1100yds / 3300ft
Battery CapacityRemote Transmitter: 300mAh, Receiver: 650mAh
Working TimeRemote Transmitter: 180 days, Receiver: 25-40 days
Waterproof LevelRemote Transmitter: IPX3, Receiver: IPX7
Target PetDog (5-120 lbs)
MaterialPlastic
Battery IncludedYes
Is Smart DeviceNo
No Prongs and No Shock design

Image: The PD 523V collar features a no-prongs and no-shock design for humane training.

100% Waterproof IPX7 collar

Image: The collar is 100% waterproof (IPX7), suitable for use in rain or while swimming.

Remote range up to 3300 feet

Image: The remote offers a training range of up to 3300 feet, allowing control even from indoors.

20-day battery life for collar and remote

Image: Both the receiver and remote feature a long-lasting battery life of up to 20 days on a 2-hour charge.

Adjustable nylon collar for various neck sizes

Image: The nylon collar strap is adjustable from 8-27 inches to fit various dog neck sizes.

5. Setup

5.1. Introduction for the Buttons

User-Friendly Remote and Receiver Diagram

Image: Diagram showing the remote control and receiver collar with labeled buttons and features.

  • Signal Channel Button: Press this button to choose channel 1, 2 or 3 for dog training before connecting the signals between remote transmitter and receiver.
  • Power Button (Remote): Press to turn the remote transmitter on or off.
  • Beep And Vibration Button: Press this button and the receiver will beep and vibrate at the same time.
  • Vibration Button: Press the vibration button and the receiver will vibrate.
  • Beep Button: Press the beep button and the receiver will beep. The beep function is not adjustable.
  • +/- Button: Reduce and increase the vibration, beep & vibration level.
  • Charging Port: For Remote Transmitter and Receiver.
  • Indicator Light: On Receiver.

5.2. Charging

Charge the remote transmitter and receiver for at least 2 hours when you first receive them. The collar can't receive any signals while it is being charged.

How to choose USB charger

Please choose a USB charger with the parameters below (you can charge the device by the charger of a smart phone or laptop/computer USB interface, before that please check if the charger is with the following parameters):

  • Input: 100-240V ~ 50-60Hz
  • Output: 5V 1000mA (or 300mA/500mA)

Charge the remote transmitter

  1. Connect the charger cable to the charging port.
  2. Plug the charger into a standard socket.
  3. The battery icon will flash during charging and be solid when charging is completed.

Charge the receiver

  1. Remove the rubber cover, connect the receiver to a charger into a standard socket.
  2. The red indicator light will flash slowly when the receiver is charging. After fully charged, the red indicator light keeps on.

5.3. Turning the Receiver On and Off

  1. Turn On: Press the power button once, the receiver will make a short "beep" sound, meaning that the receiver is turned on.
  2. Turn Off: Press the power button once, the receiver will make a long "beep" sound and the indicator light is not flashing any more.

5.4. Check the Receiver Power

When the receiver is turned on, press the power button twice quickly to check the power:

  • Receiver beeps 5 times, representing 100% (80-100%)
  • Receiver beeps 4 times, representing 80% (60-80%)
  • Receiver beeps 3 times, representing 60% (40-60%)
  • Receiver beeps 2 times, representing 40% (20-40%)
  • Receiver beeps 1 time, representing 20% (1-20%)

6. Operation

6.1. How to Wear Receiver Collar Correctly

  • The receiver shall be placed on the bottom of the dog's neck.
  • The space between collar and the dog's neck should be maintained to a finger distance, which can't be too loose.
  • The extra part of the strap can be trimmed, or be handled with other methods.
Adjustable collar for various dog sizes (5-120 lbs)

Image: The adjustable collar fits dogs from 5 to 120 lbs, with neck sizes from 8-27 inches.

6.2. Pairing and Testing

How to pair the remote transmitter and receiver

  1. Turn on the remote transmitter, press the CH button to choose a signal channel you want to use.
  2. Hold power button on the receiver for 2 seconds, when the indicator light keeps flashing, press one of the function button like beep, vibration or beep&vibration on remote transmitter to pair.
  3. If you do not press the function button within 10 seconds, please pair them again.
  4. If you have multiple receivers, you can choose the same signal channel or choose another channel for pairing.

Video: This video demonstrates the pairing process between the receiver collar and the remote control. Press and hold the receiver on/off button until the red indicator flashes, then press the vibration button on the remote to pair. Successful pairing is indicated by receiver vibration.

Test the dog training collar

  • Beep & vibration function test: Press the beep and vibration function button of the remote, the receiver will beep and vibrate at the same time.
  • Vibration function test: Press the vibration function button, the receiver will vibrate.
  • Beep function test: Press the beep button, the receiver will make a beep sound.

Important Notes for Pairing:

  • You need to pair remote transmitter and receiver before using it on dog. Please follow the manual for the first time use.
  • Please keep in mind the dog channel you choose and do not change to other one, or the receiver will not receive signals.
  • When the remote transmitter is turned off, all the functions are locked.
Remote controlling up to 3 dogs

Image: The remote can control up to 3 dogs, allowing for multi-dog training.

Dog and remote illustrating 3300ft range

Image: The remote control has an effective range of up to 3300 feet.

Dog being trained with beep and vibration modes

Image: The collar offers gentle beep, vibration, and combined beep+vibration modes for training.

6.3. Reinforce Learning Behaviors

If your dog knows the command but responds inconsistently with your requirement, a training collar can sharpen his skill. For example, you have taught your dog to come when calling, but over time he responds slower. You can communicate with him via the remote transmitter, so that he responds to your call immediately.

  1. Set the collar to initial stimulation level and test it.
  2. Fit the collar on your dog's neck along with his regular collar.
  3. Let him roam around the training area. Then give the command and press the stimulation button simultaneously.
  4. If your dog moves toward you, stop stimulation and praise him.
  5. If he stops before he reaches you or turns away, repeat the command and continue the stimulation. Again, stop at the instant he runs to you and reward him by praising him or feeding him a treat. Repeat this for 3 or 4 times.

6.4. Reference Size for Different Dogs

This table provides general guidelines for dog sizes and corresponding collar fit:

Size (Dog)Neck (In)Chest Measurement (In)Back Length (In)Type
Mini7.8-8.69.8-11.87.5Chihuahua, Yorkshire Terrier
Small7.8-9.511.4-14.29Chihuahua, Yorkshire Terrier, Poodle, Pomeranian
Medium9.0-11.013.7-16.511Maltese Dog, Shih Tzu
Large9.6-12.216.2-18.512.2Miniature Schnauzer, Pekingese
Large11.8-13.418.1-20.813.8Schnauzer, English Cocker Spaniel
Large13.0-14.520.5-23.215.7Beagle
Huge17.0-18.930.0-33.023.6Husky

7. Maintenance

  • Please examine regularly to ensure tightness of the receiver and eliminate any external damages.
  • Examine your dog's neck and clean up weekly.
  • The battery is rechargeable. In order to maintain battery life, please charge it every 2 months if it is not often used.

8. Troubleshooting (FAQ)

Q: How old can my dog use this training collar?

A: DO NOT use on puppies younger than 6 months.

Q: Can I use this training collar for more than one dog?

A: Yes, you can simply add one or two receivers to the system to control two or three dogs, because three dog channels are available with one remote transmitter.

Q: How do I know when to charge the batteries of the dog training collar?

A: For Remote Transmitter: The battery level icon will be displayed on the left down side of the LCD screen. For Receiver: Press the power button twice quickly to check the battery level, if only one beep is emitted, charge it in time.

Q: How long can I leave the receiver on my dog?

A: The receiver is not designed to be worn constantly. We recommend to wear the collar on your dog less than 18 hours per day.

Q: How long should I process my training session for my dog?

A: Training sessions should be kept positive and short, it is better for about 10-15 minutes each time.

Q: What are the proper levels of vibration for my dog?

A: Try to find the best suitable levels of vibration for your dog starting from the lowest level. Excessive levels of stimulation will cause strong response from your dog.

Q: What is the effective distance of your dog training collar?

A: Without obstacles, the effective distance could be as far as 1000 meters between remote transmitter and receiver collar. However in reality, a list of factors, including telecom signal station, magnetic field, obstacle, battery volume, other wireless devices nearby, land form, vegetative cover, etc, will influence transmission of signals from remote transmitter and the actual effective distance of the remote transmitter.

Q: Once my dog is trained and has obeyed to my commands, is it still necessary for my dog to continue wearing the receiver?

A: Yes, you may need to reinforce your dog's memory with the receiver from time to time.

Q: Any other better training methods?

A: You can prepare some dog food for training incentive to achieve better training outcomes. Each time after you restrain your dog's misbehavior, you can tell your dog what is supposed to do and what is not. And after a few times of repetitions, your dog will understand what you like and what you don't like.

Q: The dog training collar does not work, or my dog does not respond after correct installation of the dog training collar, how should I solve this problem?

A: 1. Make sure the battery of remote transmitter and receiver collar have enough power to operate. 2. Check to see if receiver collar is turned on. 3. Check signal channel button on remote transmitter to ensure signal channels are correctly configured. 4. Try to pair the remote transmitter and receiver again. 5. Take off receiver collar and test all of the three functions work properly. 6. Make sure receiver collar is properly worn and the receiver collar is not loose.

9. User Tips

  • This product has been found effective in preventing dogs from barking at night, while respecting the dog's well-being.
  • If your dog doesn't respond immediately, don't give up. Consistency is key. Try to work on it a few times without increasing stimulation.
  • During training, never give a command if you are not able to enforce it. This helps your dog make the mental connection between the vibration/beep and their behavior.

10. Warranty and Support

The PD 523V dog training collar is covered by a 12-month warranty from the date of its original purchase. This warranty covers defects in materials and workmanship under normal use.

Warranty Exclusions: This warranty is void if the defect is caused by accidental damage, misuse, abuse, neglect, improper repair or alteration by unauthorized persons, or a failure to follow operating instructions provided with the product. This warranty does not apply to normal wear and tear or commercial use.

Contact Support: For any warranty claims or support inquiries, please contact us with your order ID and problem or issue. We are committed to responding within 24 hours.

© 2024 PaiPaitek. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.