1. Important Safety Instructions
WARNING:
- READ ALL SAFETY INSTRUCTIONS AND THE ENTIRE MANUAL. Failure to heed the warnings and instructions may result in electric shock, fire, or serious injuries.
- This device is intended for children 8 years of age and older. People with reduced physical, sensory, or intellectual abilities, or those who lack experience and knowledge, should be supervised or instructed in safely using the device; they must also be aware of possible hazards. Children should not play with this device. Cleaning and maintenance should not be performed by children without supervision.
To reduce the risk of injury or damage, please observe the following safety precautions:
- Please read all instructions regarding safety and operation before using the device.
- Keep the safety and user manual for future reference.
- Follow all operating and usage instructions.
- Do not dispose of electrical appliances as unsorted waste; use a separate waste collector. Contact your local authority for appropriate disposal.
Restrictions:
- Do not use the Vacuum Cleaner to vacuum detergent, kerosene, glass dregs, needles, wet items, sewage, matches, toys, paper balls, or other large objects, as this may cause blockage or motor failure.
- Keep the Vacuum Cleaner away from fire and other hot places.
- Ensure filter modules and the roller brush of the floor brush are installed.
- Do not block the suction inlet or the roller brush.
- Do not pour or spill water or other liquids into the machine.
- Fully charge the battery when new or after long-term storage. Charge and discharge at least every three months if not used for a long time.
- The appliance is only to be used with the power supply unit provided.
- The plug must be removed from the socket-outlet before cleaning or maintaining.
- When cleaning, use a dry cloth. Do not use gasoline, banana water, or other cleaners that may crack or fade the shell.
- Do not use or store in high/low temperatures or outdoors/wet surfaces. Recommended ambient temperature for use is 0-30°C. Store in a cool, dry place away from sunlight.
- If the Vacuum Cleaner malfunctions, it must be tested and repaired at a designated service center. Do not disassemble the machine yourself.
- Waste battery packs should be safely recycled and disposed of.
- If the power cord is damaged, it must be replaced by a professional from the manufacturer's local maintenance department.
2. Product Overview
Host Components:
- Dust Bucket
- LED Display
- Outlet HEPA
- Suction Power
- ON/OFF Button
- Battery
- Dust Bucket Release Button
- Dust Bucket Cover Release Button
- Battery Pack Release Button
Folding Tube Components:
- Floor Brush Connector of Folding Tube
- Folding Tube Adjustment Button
- Main Body Connector of Folding Tube
Package Contents:
The Proscenic P20 OnePass Cordless Vacuum Cleaner comes with the following items:
- 1 x Main Unit (Host)
- 1 x Battery
- 1 x Floor Brush
- 1 x Flexible Tube (Bendable Wand)
- 1 x Charger (Power Adaptor)
- 1 x Water Tank
- 2 x Mop Cloths
- 1 x Wall Mount (Vacuum Cleaner Storage Rack)
- 1 x Long Crevice Nozzle
- 1 x Upholstery Tool (2-in-1 Brush)
- 1 x Cleaning Tool
- 1 x User Manual

Image: The main unit, flexible tube, floor brush, wall mount, charger, water tank, mop cloths, crevice tool, upholstery tool, and cleaning tool are displayed.
3. Setup and Assembly
Note: The power supply of the vacuum cleaner needs to be shut off before installing and replacing accessories. This product cannot keep itself upright without a fixed support. Please place the machine and accessories firmly!
3.1 Battery Installation and Removal
Installation: Insert the battery pack into the main body until you hear a click sound from the battery pack release button.
Removal: Press the battery pack release button and pull out the battery pack.
3.2 Install the Metal Tube and Floor Brush
Connect the metal tube to the main body, then connect the floor brush to the other end of the metal tube. A clicking sound from both connection buttons indicates proper installation.
3.3 Install Accessories
Upholstery Tool: Designed to gently lift dirt and dust from delicate upholstery fabrics. Perfect for sofas, chairs, and other furniture.
Crevice Tool: Engineered for deep cleaning in tight spots like edges, corners, and narrow gaps. Versatile for furniture, car interiors, and household appliances.

Image: The crevice tool is shown effectively cleaning tight spaces on a sofa.
3.4 Remove and Install the Dust Bucket
Removal: Press both dust cup release buttons simultaneously with one hand and remove the dust cup upwards with the other hand.
Installation: Align the dust cup limit buckle, press down the dust cup until you hear a click sound.
3.5 Mopping Function
The water tank assembly can be attached to the bottom of the floor brush for simultaneous vacuuming and mopping.
- Fill the tank with water, evenly dampen the mop pad, then attach both the mop pad and the water tank.
- Fix the water tank firmly onto the floor brush.
- Press the "Open" button to activate the water flow system, which releases water through air pressure difference.
- After cleaning, pour out remaining water and press "Close" to prevent floor wetting.

Image: The vacuum cleaner is shown with the detachable water tank and mop pad attached for combined vacuuming and mopping.
Important Notes for Mopping:
- Clean mop pad after each room.
- Never add cleaning solutions (risk of corrosion).
- The water-filled tank increases overall weight and operating resistance.
3.6 Use the Telescopic Tube (Bendable Wand)
Press the folding tube adjustment button to bend the tube. To straighten, lift the folding tube upward until you hear a clicking sound.

Image: The flexible bendable wand is demonstrated reaching deep under furniture, highlighting its 180° flexibility compared to a traditional rigid vacuum.
3.7 Use the Wall Hanger
Installation: Insert expansion tubes into pre-mounting holes on the wall. Thread two fixing screws through the wall hanger's mounting holes, align with expansion tube holes, insert, and tighten clockwise.
Usage: After fixing the wall mount, hang the vacuum on it. Insert the vacuum cleaner's attachment into the fixing holes of the side wall mount. Insert the adapter into the charging wall mount's hole. The machine will charge automatically when hung.

Image: Various charging and storage options are shown, including direct charging, battery charging, and wall-mounted charging.
4. Operating the Vacuum Cleaner
4.1 Charging the Vacuum
- Insert the charging adapter plug into an AC outlet, then insert the adapter charging head into the main unit for direct charging.
- You can also dismantle the battery pack and use the adapter to charge it separately.
- Insert the charging adapter into the charging wall mount, then place the host directly on the wall mount for charging.

Image: The vacuum cleaner is shown with its removable battery, highlighting its long runtime capability.
4.2 Switching On/Off and Switching Gears
Power Button: In case of sufficient power, click the power button to turn on the machine. Click it again to turn off the machine.
Gear Modes: The machine defaults to ECO mode. Click the adjustment button to switch to NORMAL gear, then click again for TURBO gear. The machine will shut down when clicking the power button under any gear.
Charge Protection: 100% battery is displayed when fully charged. Below 10%, the display screen flashes until the device powers off. When out of battery, the display shows "0" and flashes.

Image: The dynamic smart display shows current battery percentage, selected mode (ECO, AUTO, TURBO), and indicators for HEPA cleaning tips.
4.3 Lamp Display Indicators
- HEPA Filter Not Installed: Indicator flashes red for 8 seconds. The host unit will not power on.
- HEPA Cleaning Reminder: After 15 hours of use, the indicator flashes green. Clean the HEPA filter, then press and hold the "Mode" button for 5 seconds to reset.
- Floor Brush Blocking Protection: When the floor brush is blocked, the icon flashes at 0.6Hz for 8 seconds. The host will not stop unless the blockage persists.
- Duct Clogging Protection: Icon blinks at 0.6Hz for 8 seconds after shutdown if clogging is detected.
5. Maintenance
5.1 Clean the Dust Bucket and Filter
If suction drops, the HEPA should be cleaned. Remove the dust bucket, take out the HEPA filter, remove dust, knock or wash with clean water, and dry in the sun. Reinstall only when completely dry. Do not bend or twist the HEPA.

Image: An exploded view of the 6-layer filtration system, showing centrifugal sedimentation, stainless steel mesh, single cone filtration, sponge, HEPA filter, and tail air sponge.
5.2 Cleaning of Electric Floor Brush
- Push the lock button down to the unlocked state, take out one end of the roller brush, and pull out the whole brush. Note: Some dust may fall when pulled out.
- Clean up wound hair or debris on the roller brush. If washed with water, it must be dried completely before reinstallation.

Image: The anti-tangle brush is shown with its anti-winding structure designed to prevent hair wraps.
6. Troubleshooting
| Fault | Possible Issues | Solution |
|---|---|---|
| Machine cannot be started | Battery not installed correctly Battery is dead Dustbin is full | Install battery correctly Charge the battery Empty the dustbin |
| No suction / Suction becomes smaller | Suction pipe or floor brush blocked Dustbin or HEPA not installed Filter HEPA blockage | Clean blockage Reinstall dustbin and HEPA Clean and dry HEPA |
| Dust leaking from air outlet | HEPA not installed correctly | Install HEPA correctly |
| Roller brush stops turning / Blockage indicator lights red | Roller brush entangled or stuck | Clear winding or blockage |
| Full dust indicator lights red | Dustbin is full | Empty the dustbin |
Note:
- This vacuum cleaner must be used with the original battery and power adapter.
- Do not use the battery for any purpose other than this vacuum cleaner.
7. Specifications
Please use the original charger of this product for charging.
| Feature | Detail |
|---|---|
| Brand | Proscenic |
| Model | P20 OnePass |
| Type | Cordless Vacuum Cleaner |
| Color | Gray |
| Suction Power | 70kPa |
| Motor | 680W Brushless Motor |
| Battery | 2200mAh x 8 Lithium-ion |
| Working Voltage | 29.6V |
| Runtime | 60-70 min (MAX) |
| Charging Time | 4-5 hours |
| Filtration System | 6-layer HEPA filtration |
| Modes | 3 (ECO, NORMAL, TURBO) |
| Dustbin Capacity | 1.5L |
| Water Tank Capacity | 230ml |
| Product Weight | 2.7kg |
| Product Size (L x W x H) | 392 x 108 x 1100mm |
| Adapter Rated Input | 100-240V~50/60Hz |
| Adapter Rated Output | 36V=0.5A |
8. User Tips
- Utilize the Green Light: The floor brush's green light is very strong and helpful for locating dust and debris, especially on dark floors.
- Leverage the Bendable Pipe: The flexible bending pipe is extremely useful for reaching low places under furniture without needing to bend or strain your back.
- Efficient Normal Mode: For general cleaning of areas up to 75m², the normal mode provides sufficient power and efficiency.
- Accessory Use: Take advantage of the many included accessories for various cleaning tasks, from upholstery to tight crevices.
9. Warranty and Support
After-Sales Service
If you encounter any issues during use or need to replace any accessories, please contact the Proscenic after-sales service team via email:
support@proscenic.com
Warranty Registration
Scan the QR code provided in your original user manual to activate your warranty and potentially receive a limited-time surprise accessory.