PHYEE PSAISO206P15DINANT

Contents

User Manual

PHYEE CAN Bus Decoder Harness

Model: PSAISO206P15DINANT

Introduction

This manual provides instructions for the installation and operation of the PHYEE CAN Bus Decoder Harness, Model PSAISO206P15DINANT. This harness is designed to facilitate the integration of a 16-Pin Android head unit into specific Peugeot 206+ (Plus) models, enabling features such as steering wheel control (SWC), reversing signals, and door status information.

PHYEE CAN Bus Decoder Harness components
Figure 1: Overview of the PHYEE CAN Bus Decoder Harness components, including the main harness, CAN bus decoder, and antenna adapter.

Compatibility

Important: Please verify your vehicle's specifications before installation.

This CAN Bus Decoder Harness is specifically designed for:

  • Vehicle Model: Peugeot 206+ (Plus)
  • Model Years: 2009-2012
  • Factory Radio Model: Must be RD3 (FALSE RD3 Modern Full CAN-Bus system)
  • Interior Style: Must have 207-style interior and CAN Bus system.
  • Display: Must have a detailed dot-matrix display with amber/white backlight.
  • Harness Pins: Block A, Pins 1 & 3 must have pins.
  • Car Harness: Must be ISO standard.

This CAN Bus decoder is for FALSE RD3 models only. Check your pins and display before buying!

Compatibility check for Peugeot 206+ showing CAN H and CAN L pins
Figure 2: Critical compatibility check for Peugeot 206+ (2009-2012). Ensure your car's interior matches the 207 style and verify the presence of CAN H (Pin A1) and CAN L (Pin A3) in the car's harness.

Setup and Installation

Components Overview

The package includes the following components:

  • 16-pin to ISO wiring harness (1 piece)
  • CAN Bus decoder (1 piece)
  • DIN antenna adapter (1 piece)

Navigation Unit Interface Requirements

This harness is designed for Android head units with a 16-pin Android radio connector and an 8-pin connector. Refer to the diagram below for specific pin assignments.

Navigation unit interface requirements and pinout for 16-pin Android radio
Figure 3: Pinout diagram for the 16-pin Android system connector. This shows the required connections for RR-, RR+, RL+, RL-, ANT, KEY 2, ILL, Battery+ 12V, FL+, FL-, FR+, FR-, KEY 1, REVERSE, ACC 12V, and GND.

Pinout Functions Definition (for Peugeot 206+)

The ISO connectors have specific pin assignments for power, ground, and speaker connections. Ensure these match your vehicle's wiring.

Pinout functions for ISO Connector A and B for Peugeot 206+
Figure 4: Detailed pinout for ISO Connector A (CAN H, CAN L, CONSTANT 12V, 12V, GROUND) and ISO Connector B (RR+, RR-, RF+, RF-, LF+, LF-, LR+, LR-).

Installation Connection Diagram

Follow these steps to connect the harness:

  1. Connect the 16-pin plug from the harness to your Android head unit.
  2. Connect the CAN Bus decoder to the designated connector on the harness.
  3. Connect the 8-pin plug from the harness to your Android head unit.
  4. Connect the ISO connector from the harness to your vehicle's factory wiring.
Installation connection diagram for Peugeot 206+ 2009-2012
Figure 5: Visual guide for connecting the 16-pin plug (1), CAN Bus decoder (2), 8-pin plug (3), and ISO connector (4) to the Android head unit and vehicle wiring.

For a visual demonstration of the product and its connections, please watch the video below:

Video 1: Product demonstration showing the PHYEE CAN Bus Decoder Harness components and their connections.

Operating Instructions

CAN Bus Setting Operation

After physical installation, configure your Android system to recognize the CAN Bus decoder:

  1. Connect the harness adapter and CAN Bus decoder correctly.
  2. Connect your Android system to the internet to update the CAN Bus version.
  3. Enter the Android system factory settings (password may be required) and navigate to the "CAN Bus Section".
  4. Choose the CAN Bus decoder brand (e.g., "Raise"), then select "Peugeot", and finally the specific model and year (e.g., "207 / 207cc").
CAN Bus setting guide for Android head units
Figure 6: Step-by-step guide for configuring the CAN Bus settings within the Android head unit's factory settings.

CAN Bus Brand Setting

If your specific model is not listed in the CAN Bus settings, you may select a similar car model or another model from the same platform. Common brands and their setting names include:

  • Hiworld (Hiworld / WC)
  • Raise (Raise / RZC)
  • Simple Soft (Simple / XINPU)
  • OD (Oudi / Simple / XINPU)

Supported Features

Once properly installed and configured, the CAN Bus decoder harness supports the following original car functions:

  • ACC 12V signal
  • Original car reversing signals
  • Original car steering wheel control (SWC)
  • Car door status information

Maintenance

The PHYEE CAN Bus Decoder Harness is designed for durability and requires minimal maintenance. To ensure optimal performance:

  • Keep all connections clean and free from dust or moisture.
  • Periodically check for secure connections, especially after any vehicle maintenance.
  • Avoid exposing the components to extreme temperatures or direct sunlight for prolonged periods.

Troubleshooting

If you encounter issues after installation, consider the following:

  • No Power to Head Unit:
    • Check all power connections (Battery+, ACC 12V, Ground).
    • Ensure the vehicle's fuse for the radio is intact.
  • Steering Wheel Controls Not Working:
    • Verify the CAN Bus decoder is correctly connected and configured in the Android head unit's settings.
    • Ensure the correct CAN Bus brand and model are selected in the head unit's factory settings.
  • No Reversing Signal or Door Status:
    • Confirm the CAN Bus decoder is properly connected.
    • Check the Android head unit's settings for proper integration with reversing camera input or door status display.
  • Intermittent Functionality:
    • Inspect all harness connections for looseness or corrosion.
    • Ensure the CAN Bus decoder is securely seated.

If problems persist, consult a professional car audio installer or contact customer support.

Specifications

AttributeValue
Model NamePSAISO206P15DINANT
Brand NamePHYEE
Item TypeCables, Adapters & Sockets
Item Weight0.09kg
Item SizeCAN Bus ISO Harness Adapter
Voltage12 V
InterfaceISO
MaterialCopper
Suitable CarPeugeot 206+ (plus) 2009-2012
Suitable for16-Pin Car Android
Supports ACC 12VYes
Supports original car steering wheel controlYes
Supports original car reversing signalsYes

User Tips

  • Always double-check the compatibility of the harness with your specific vehicle model and year, especially the factory radio type (RD3) and interior style (207-style electronics).
  • When configuring the CAN Bus settings on your Android head unit, ensure you have an internet connection for potential software updates.
  • If your specific CAN Bus decoder brand is not listed, try selecting a similar model from the same platform (e.g., "Raise" or "Simple Soft").

Warranty and Support

This product comes with a 1-year warranty from the PHYEE store. For technical assistance or support, please contact:

  • WhatsApp: 0086-15014817930
  • Email: xmove_jeff@outlook.com

Please provide your product model name (PSAISO206P15DINANT) and a detailed description of your issue when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.