HITBOX HBC45II

Contents

HITBOX HBC45II Plasma Cutter User Manual

Model: HBC45II | Brand: HITBOX

1. Introduction

Thank you for choosing the HITBOX HBC45II Plasma Cutter. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new plasma cutter. Please read this manual thoroughly before use and keep it for future reference.

The HITBOX HBC45II is a Non-HF (Non-High Frequency) Non-Touch Pilot Arc Plasma Cutter designed for home DIY workshops and professional use. It features an IGBT inverter technology, a smart LED display, and supports 2T/4T grid plasma cutting for various metals including stainless steel, iron, carbon steel, and galvanized sheets.

HITBOX HBC45II Plasma Cutter in use

Figure 1.1: HITBOX HBC45II Plasma Cutter in operation.

2. Package Contents

Please check the package for the following items:

  • 1.5m 300A Ground Wire Clamp (10-25)
  • Hose Clamp (6-12mm)*2
  • Nozzle*2
  • Electrode*2
  • 4m Raw Tape
  • Instruction Manual
  • 40A XS45 Cutting Gun
  • AFR-2000 Gas Meter Filter
  • PVC Mesh Tube 2M
  • American Adapter (if applicable)
Package contents of HITBOX HBC45II Plasma Cutter

Figure 2.1: Included accessories and components.

3. Specifications

FeatureSpecification
Brand NameHITBOX
Model NumberHBC45II
OriginMainland China
UsePlasma Cutter
Input Voltage110V~220V±10%, 1-PH, 50/60Hz
Input Current35A
No-load Voltage100V
Rated Current45A
Working Environment Humidity≤90%
Ambient Temperature-10~40°C
Dimensions330mm x 230mm x 120mm (13.0" x 9.1" x 4.7")
Weight3.72kg / 8.2lbs
Rated Duty Cycle35% 35A (60% duty cycle)
Power Cable6' (1.8m)
Output Current Range12~35A
Output Voltage100V
Gas SupplyClean, dry, oil-free air
Recommended Pressure/Flow Rate0.6~0.75Mpa (3.0scfm @70psi)
Pilot Arc Start ModeNon-HF Plasma Cutting
Max Severance Cutting Thickness15mm (3/5inch)
Normal Cut (Mild Steel)10mm (2/5inch)
Normal Cut (Stainless Steel, Aluminum)35A
Is Smart DeviceYes
CertificationCE, FCC, RoHS
Product dimensions and weight

Figure 3.1: Product dimensions and weight.

4. Safety Information

Welding and plasma cutting are dangerous and can cause harm to you and others. Always use proper protection and follow safety guidelines.

4.1. General Safety Precautions

  • Professional Training: Professional training is required before working with the machine.
  • Work Area: Ensure your work area is well-ventilated and free from combustible materials. Keep a fire extinguisher nearby.
  • Machine Use: Do not use the machine for purposes other than plasma cutting.

4.2. Electric Shock Hazards

  • Risk: Can cause serious injury or even death.
  • Grounding: Always ensure the machine is properly grounded according to application criteria.
  • Contact: Never touch live electrical parts with bare skin, wet gloves, or wet clothing.
  • Isolation: Ensure you are isolated from the ground and the workpiece.
  • Power Off: Always turn off the power before performing maintenance or making connections.

4.3. Smoke and Gas Hazards

  • Risk: Can be harmful to health.
  • Ventilation: Keep your head away from fumes and gas. Ensure the work area is well-ventilated using exhaust or ventilation equipment.

4.4. Arc Radiation Hazards

  • Risk: Can damage eyes or burn skin.
  • Protection: Wear suitable welding masks (with proper filter shades) and protective clothing to protect your eyes, face, and body.
  • Bystanders: Use suitable masks or screens to protect onlookers from harm.

4.5. Fire and Explosion Hazards

  • Risk: Welding sparks can cause fire or explosion.
  • Environment: Ensure no combustible materials are nearby.
  • Containers: Hermetic welding of containers is prohibited.

4.6. Hot Parts and Moving Parts

  • Hot Parts: Do not touch hot parts of the machine or workpiece with bare hands. Allow parts to cool.
  • Moving Parts: Keep away from moving parts such as the fan. Ensure all doors, panels, and safety devices are closed during operation.

4.7. Cylinder Safety

  • Risk: Cylinders can explode if damaged.
  • Positioning: Keep cylinders upright and chained to a support. Keep them away from heat, sparks, and physical damage.
  • Contact: Never allow the torch or welding electrode to touch the cylinder.
  • Electrical: Keep cylinders away from live electrical circuits.

5. Setup Instructions

5.1. Machine Overview

Familiarize yourself with the components of your plasma cutter:

Front panel controls of HITBOX HBC45II

Figure 5.1: Front Panel Controls

  • 1. Current Display
  • 2. Cutting Status Indication
  • 3. Tips for Abnormal Gun Nozzle Installation
  • 4. 2T/4T Status
  • 5. Mesh Cutting Status
  • 6. Fan Status
  • 7. Abnormal Status
  • 8. 110V/220V Status
  • 9. Current Adjustment Knob
  • 10. Mode Selector Button
  • 11. Cutting Gun Interface
  • 12. Ground Clamp Interface
Rear panel connections of HITBOX HBC45II

Figure 5.2: Rear Panel Connections

  • 1. Power Cable
  • 2. Cylinder Gas Hose
  • 3. Power Switch
  • 4. Location of Screws for Gas Meter
  • 5. Machine Inlet Pipe Connection
  • 6. Air Meter
  • 7. Machine Inlet Pipe

5.2. Placement and Environment

  • Place the machine on a secure, level surface to prevent toppling.
  • Ensure there is open space around the machine for proper air circulation (back intake, front exhaust).
  • Keep the machine dry and away from wet ground, puddles, or rain.

5.3. Electrical Connections

  • Connect the power cable to a grounded receptacle matching the machine's voltage requirements (110V~220V).
  • Ensure the ground clamp is firmly attached to a clean metal surface of the workpiece.
  • Use an appropriate extension cord if needed (20A minimum, 12 AWG for up to 30ft).

5.4. Air/Gas Connection

The plasma cutter requires a clean, dry, oil-free air supply. An air compressor with a pressure regulator and flow gauge is necessary.

  1. Assemble the pressure regulator: Attach the gauge and appropriate fittings.
  2. Connect the pressure regulator to the

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.