1. Product Overview
The RAISE G-RZ-FIAT54 is a CAN Bus decoder designed to integrate with your car's electrical system and an aftermarket Android head unit. It translates CAN Bus data, allowing the Android head unit to communicate with the vehicle's systems for functions such as steering wheel controls, reverse camera signals, and more.
Figure 1: RAISE G-RZ-FIAT54 CAN Bus Decoder
2. Specifications
| Feature | Specification |
|---|---|
| Model Name | RZ-FIAT54 |
| Special Features | CAN Bus Data Converter |
| Item Weight | 35g |
| Item Size | 45mm x 40mm x 18mm |
| Voltage | 12 V (Operating range: +9V~+16V) |
| Brand Name | pinmany (Manufacturer: RAISE) |
| Origin | Mainland China |
| Interface | 16-PIN (PH2.0 connector) |
| Item Type | Cables, Adapters & Sockets |
| Material | Black plastic shell |
| Suitable Head unit | Android 7'/9'/10'/etc |
| Suitable Car Models | For Fiat Doblo-Professional 2024, For Fiat E-Scudo 2024 |
Figure 2: Detailed Product Information
Figure 3: Android Head Unit Compatibility
3. Pre-Installation Considerations
- This product does not include connection cables. If you do not have suitable cables, it is recommended to purchase a CAN Bus adapter with the necessary cables.
- The CAN Bus box is only compatible with Android head units that feature 8-pin connectors and support serial communication.
- Installation requires professional knowledge of car wiring. Improper wiring can cause damage to the CAN Bus decoder and your vehicle's electrical system.
- Always strictly follow the provided pin definition chart for wiring.
- Before purchasing, ensure your Android radio can display your car's name in the CAN Bus settings screen. Refer to the "CAN Bus Settings on Android Head Unit" section for guidance.
- If you are unsure about fitting or compatibility, please contact support before proceeding with the purchase or installation.
Figure 4: Important Pre-Purchase Tips
4. Installation Guide
4.1 Pin Definition
Refer to the following diagram for the 16-pin connector definition of the RZ-FIAT54 CAN Bus Decoder. Ensure all connections are made accurately according to these definitions.
Figure 5: RZ-FIAT54 16-Pin Connector Pinout
- 1. GND (Ground)
- 2. BATT (Battery +12V)
- 3. CAN-H (CAN High)
- 4. CAN-L (CAN Low)
- 5. ILL-OUT (Illumination Output)
- 6. ACC-OUT (Accessory Output)
- 7. PARK-OUT (Parking Brake Output)
- 8. REV-OUT (Reverse Gear Output)
- 9. NC/SWC1 (Not Connected / Steering Wheel Control 1)
- 10. NC (Not Connected)
- 11. NC/SWC2 (Not Connected / Steering Wheel Control 2)
- 12. NC (Not Connected)
- 13. UART-RX (UART Receive)
- 14. NC (Not Connected)
- 15. NC/ACC-IN (Not Connected / Accessory Input)
- 16. UART-TX (UART Transmit)
4.2 Step 1: Connection of Cable Adapter
Locate the 16-pin CAN plug on your wiring harness. Carefully plug this into the corresponding 16-pin socket on the CAN Bus Decoder. Ensure a secure and correct connection according to the pin definitions.
Figure 6: Connecting the CAN Bus Box
4.3 Step 2: Set up CAN on Android Head Unit
The exact setup procedure may vary between different Android head unit models. The following steps provide a general guide. If you encounter difficulties, consult your head unit vendor's manual or support.
- Enter Settings: On your Android head unit, navigate to the main settings menu. Look for an icon resembling a gear or 'Settings'.
- Access Car Settings: Within the settings, find and select 'Car Settings' or a similar option.
- Enter Factory Settings: Look for 'Factory' or 'Factory Settings'. You may be prompted to enter a password. Common factory passwords include: 3368, 1617, 8317, 8888. If these do not work, contact your Android radio vendor.
- Navigate to CAN Bus Settings: Inside the factory settings, find 'CAN bus setting' or 'CAN Related Settings'.
- Select Car Type Setting: Choose 'CarType Setting'.
Figure 7: Android Head Unit CAN Bus Setup (Part 1)
Figure 8: Android Head Unit CAN Bus Setup (Part 2)
4.4 Step 3: Select CAN Bus Box Manufacturer and Car Model
Within the CAN Bus settings:
- Select Manufacturer: Choose 'Raise' from the list of CAN Bus Box manufacturers.
- Select Car Model: Select the correct car model and year for your vehicle (e.g., 'FIAT_R08(Fiat DOBLO(High Level))' for Fiat Doblo-Professional 2024).
- Save and Reboot: Save your settings and reboot the Android head unit for the changes to take effect.
Figure 9: Selecting Manufacturer and Car Model
5. Operating Instructions
Once properly installed and configured, the CAN Bus decoder will automatically translate vehicle data for your Android head unit. Specific operations will depend on the features supported by your head unit and the vehicle's CAN Bus system. These may include:
- Steering wheel control integration.
- Display of vehicle information (e.g., door status, climate control).
- Automatic activation of reverse camera.
- Illumination control synchronization.
Refer to your Android head unit's manual for detailed instructions on how to utilize these integrated features.
6. Maintenance and Care
The RAISE G-RZ-FIAT54 CAN Bus Decoder is a sealed electronic component and requires minimal maintenance. To ensure its longevity and proper function:
- Keep the device dry and away from extreme temperatures.
- Avoid physical impact or dropping the device.
- Do not attempt to open or modify the device, as this will void any potential warranty and may cause damage.
- Ensure all connections remain secure and free from corrosion.
7. Troubleshooting
If you experience issues with your CAN Bus decoder, consider the following troubleshooting steps:
- No Functionality:
- Check all wiring connections to ensure they are secure and correctly matched according to the pin definition.
- Verify that the operating voltage is within the specified +9V to +16V range.
- Confirm that the CAN Bus settings on your Android head unit are correctly configured for the 'Raise' manufacturer and your specific car model.
- Reboot the Android head unit.
- Intermittent Functionality:
- Inspect wiring for loose connections or damaged insulation.
- Ensure the device is not exposed to excessive heat or moisture.
- Incorrect Vehicle Data:
- Double-check that the correct car model and year are selected in the Android head unit's CAN Bus settings.
- Ensure your Android head unit firmware is up to date.
If problems persist after attempting these steps, please contact the seller or a qualified automotive electronics technician for further assistance.
8. User Tips
- Always disconnect the car battery before performing any wiring to prevent electrical shorts or damage.
- When routing cables, ensure they are not pinched or exposed to sharp edges that could damage insulation.
- Consider using heat shrink tubing or electrical tape to secure and insulate all wire connections.
- If your Android head unit has multiple CAN Bus settings options, try different configurations if the initial setup doesn't work as expected.
9. Support
For any questions regarding installation, compatibility, or troubleshooting that are not covered in this manual, please contact the seller or manufacturer for support. Provide your product model (RZ-FIAT54), vehicle make/model/year, and Android head unit details for faster assistance.
