LOKMAT APPLLP 7 Max Smart Watch User Manual

1. Product Introduction

The LOKMAT APPLLP 7 MAX is an Android 4G full-netcom smart watch phone. It is powered by the SC8541E chip with Android 8.1 OS and features a 2.06-inch AMOLED full touch screen. This smartwatch supports independent call and internet access via a Nano-SIM card, a pull-out 120° rotatable camera, built-in flashlight, Wi-Fi, GPS positioning, heart-rate tracking, multi-sport modes, and app installation. It features magnetic charging and a rugged outdoor-style design, suitable for daily and outdoor use. It can function independently or connect with a mobile phone via the HiSportPro App.

Important Statement:

All health data provided by this device is for daily reference only. This is a consumer-grade wearable device, NOT medical equipment. Readings cannot be used for medical diagnosis. Please consult a medical professional if you experience physical discomfort.

Notice: Only standard Nano-SIM cards are supported. Self-cut cards and virtual operator SIM cards are NOT allowed.

2. Product Specifications

For a visual representation of the product dimensions, refer to the diagram below:

3. Packing List

The product package includes the following items:

• LOKMAT APPLLP 7 MAX Smart Watch Host ×1
• Magnetic Charging Cable ×1
• SIM Card Eject Tool ×1
• User Manual ×1

4. Component Description

1. Microphone
2. Nano-SIM card slot
3. Flashlight shortcut key
4. Back key
5. Flashlight lamp
6. AMOLED display
7. Speaker
8. Pull-out 120° rotatable camera
9. Power key
10. Heart-rate sensor
11. Vent hole
12. Magnetic charging contacts

Operation Tips:

• Flashlight key: Short press to turn on/off the bright flashlight.
• Back key: Short press to return to the previous menu.
• Power key: Long press for power on/off; short press to turn the screen on/off.
• Camera: Pull outward, rotate up/down 120° for photo and video shooting.

5. Nano-SIM Card Installation Guide

1. Only use standard Nano-SIM cards. Do NOT use self-cut SIM or virtual-operator SIM, as this may damage the slot.
2. Use the eject pin to pop out the SIM tray. Place the Nano-SIM card with the chip facing inward, then push the tray back gently.
3. Activate VoLTE HD call, caller-ID, and mobile data service from your carrier.
4. Many 2G base stations are being phased out; a 4G Nano-SIM card is recommended.
5. Reboot the watch after SIM installation for network detection.

6. Power-on & Charging

1. Power-on: Long-press the side power key for 3-5 seconds. For new devices or fully drained batteries, charge for 2 hours before the first boot.
2. Charging: Attach the magnetic cable to the back-side contacts of the watch. Connect the other end to a standard 5V USB adapter. A charging icon will appear on the screen, indicating normal charging.

Notes:

• Do NOT use high-voltage fast chargers; it will damage the watch circuit.
• Wipe sweat and dirt from the magnetic contacts before charging to avoid oxidation and short-circuit.
• Disconnect power after a full charge to avoid long-term over-charge.
• If the watch remains idle for a long time, charge it once per week to prevent deep-discharge failure to power-on.

7. HiSportPro App Download & Bluetooth Pairing

1. Download HiSportPro: Scan the QR code on the package/manual, or search for "HiSportPro" on Google Play / App Store.
2. Turn on your phone's Bluetooth, launch HiSportPro, and register an account.
3. Tap "Add Device" inside the app, scan the pairing QR code on the watch, search for the device, and complete the binding process.
4. Permission Setup:
   • **Android:** Grant Bluetooth, location, notification access, and background activity permissions. Turn off battery optimization and auto-sleep to avoid disconnection and sync failure.
   • **iOS:** Confirm the Bluetooth pop-up request and enable App notification permission.

Pairing Failure Troubleshooting: Reboot the watch, restart phone Bluetooth, clear App cache, and re-pair. Note: The watch can work standalone with a SIM card or Wi-Fi without connecting to the HiSportPro App.

8. Main Function Instructions

8.1 Communication (SIM Card / Wi-Fi)

With a valid Nano-SIM inserted, the watch can make/receive calls, send SMS, and access mobile data internet. Connect to Wi-Fi for web-based applications. It supports contact lists, a dial pad, and call logs.

8.2 Rotatable Camera Photo & Video

Pull the camera outward and rotate it 120° vertically. Open the camera app, then tap the shutter button to take photos or record videos. Files are saved to the watch's local storage.

8.3 Flashlight

Short-press the side flashlight shortcut key to turn on the bright flashlight; short-press again to turn it off. This feature is ideal for outdoor night use.

8.4 Health Monitoring

• Heart-rate Monitoring: The back-side optical sensor tracks heart rate 24/7. Data can be synchronized to the HiSportPro App for curve charts. Loose wearing or hand shaking may cause reading errors.
• Sleep Monitoring: The watch automatically detects deep/light sleep and generates a sleep report. Short naps may not be recognized.

All health outputs are for reference only and cannot replace medical devices.

8.5 GPS Position & Navigation

Turn on the watch's GPS. AGPS assisted positioning is supported. You can install map apps for outdoor navigation. For the first-time GPS fix, please use the watch in an open outdoor area.

8.6 Sport Modes

The watch includes multiple sport modes to record steps, calories, and duration. Sport data saves locally and can be synchronized to the HiSportPro App.

8.7 System & Applications

• Pull-down status bar: Access quick settings for Wi-Fi, mobile data, Bluetooth, do-not-disturb, airplane mode, location, volume, brightness, screen ratio switch, and screen recorder.
• App market: Download and install third-party Android applications.
• Tools: Includes Alarm clock, timer, stopwatch, file manager, screen recording, etc.
• Watch face: Long press the main screen to switch watch face styles.

9. IP67 Waterproof Notice

This device is IP67 dust- and water-resistant. Lab-tested, it can withstand immersion in 1 meter of water for 30 minutes. It is safe for daily use such as hand-washing and light rain.

Forbidden Scenarios:

• Do NOT wear the watch for hot showers, baths, hot springs, or saunas. High-temperature steam can damage the sealing structure, and water damage will void the warranty.
• Not suitable for diving, surfing, or high-pressure water activities.
• After contact with seawater or chlorinated pool water, rinse the watch with fresh water and dry it completely.

Waterproof performance is NOT permanent. Drops, bumps, disassembly, and wear will weaken the sealing capacity.

10. Daily Maintenance & Safety Precautions

1. Wipe the watch and strap after sweating to keep them dry, preventing skin irritation and contact oxidation.
2. Avoid dropping and impact. Never disassemble the main unit or camera module; disassembly voids the warranty.
3. Keep away from long-term sun exposure and hot enclosed car interiors.
4. The watch has a built-in lithium battery. Do NOT pierce, heat, or burn it. Dispose of waste devices according to local e-waste regulations.
5. Heavy-load usage (gaming, video, navigation) may cause mild heating, which is normal. Stop heavy-load usage if a high-temperature warning pops up.
6. Keep away from unsupervised children due to the risk of choking on the SIM eject pin and small accessories.
7. This product is a consumer-grade Android wearable. Health data is for reference only. Seek medical help if you feel unwell.

11. Troubleshooting

1. Cannot detect SIM card: Use a standard Nano-SIM (no self-cut card). Wipe the SIM chip; ensure the tray is locked firmly; reboot the watch; confirm VoLTE & mobile data are enabled by your carrier.
2. Short standby time: The Android system consumes more power when 4G data, GPS, camera, or games are running. Close idle background apps to extend usage time.
3. Watch gets hot: High-power applications such as games, video, and navigation raise CPU load and generate heat. This is normal. Reduce heavy-load usage.
4. GPS fails to locate: Go to an open outdoor area, enable GPS, and set high-precision mode. GPS signal is weak indoors.
5. App cannot find device / pairing fails: Make sure the watch stays on the pairing page; phone Bluetooth is enabled; grant full permissions; reboot the watch and phone Bluetooth, then rebind.
6. Watch freeze / crash: Long-press the power key for 10 seconds for a forced reboot. Alternatively, perform a factory reset in the settings. A factory reset will erase all local watch data.
7. Cannot charge: Clean dirt on magnetic charging contacts; verify the USB power supply; realign the magnetic connector.

12. User Tips

• Optimize Battery Life: To maximize battery life, consider disabling unnecessary background apps and features like Wi-Fi or GPS when not in use. Adjust screen brightness to a comfortable level.
• Regular Cleaning: Regularly clean the watch screen, strap, and charging contacts to maintain hygiene and ensure proper functionality.
• Explore Watch Faces: Customize your watch's appearance by exploring the various watch faces available in the dial market.
• App Management: Utilize the app market to download useful applications, but be mindful of storage space and potential impact on performance.
• Camera Usage: When using the rotatable camera, ensure good lighting for optimal photo and video quality.

13. Warranty & Support

The LOKMAT APPLLP 7 Max Smart Watch comes with a 12-month manufacturer's limited warranty for defective items, excluding items damaged and/or misused after receipt. Accessories are covered by a 3-month warranty.

For further support or inquiries, please refer to the contact information provided by your retailer or the official LOKMAT support channels.

For a downloadable PDF version of the user manual, please refer to the Item guides & documents section on the product page.