LILYGO T-Display-S3 ESP32-S3 1.43 Inch Touch AMOLED Module

Contents

LILYGO T-Display-S3 ESP32-S3 1.43 Inch Touch AMOLED Module User Manual

Model: T-Display-S3 ESP32-S3 1.43 Inch Touch AMOLED Module

1. Product Overview

The LILYGO T-Display-S3 is a compact and versatile development module featuring an ESP32-S3R8 dual-core LX7 microprocessor, a 1.43-inch touch AMOLED display, and integrated SD card support. It offers robust wireless communication with 2.4 GHz Wi-Fi and Bluetooth 5 (LE), making it suitable for a wide range of IoT and embedded projects.

Key Features:

  • MCU: ESP32-S3R8 Dual-core LX7 microprocessor
  • Wireless: 2.4 GHz Wi-Fi & Bluetooth 5 (LE)
  • Development Platforms: Arduino, PlatformIO-IDE, ESP-IDF
  • Memory: 16MB Flash, 8MB PSRAM
  • Display: 1.43-inch SH8601 AMOLED, 466x466 px resolution, QSPI bus interface
  • Touch: Capacitive touch screen
  • Storage: Micro SD Card support
  • Power: USB Type-C for power and data, Battery Voltage Detection (IO04)
  • RTC: PCF8563 Real-Time Clock
  • Connectivity: QWIIC interface
Front and back views of the LILYGO T-Display-S3 1.43 inch module
Figure 1: Front and back views of the LILYGO T-Display-S3 1.43 inch module.
LILYGO T-Display-S3 1.43 inch module displaying a touch test screen
Figure 2: LILYGO T-Display-S3 1.43 inch module displaying a touch test screen.

2. Product Warnings / Safety Information

2.1. Electrical Safety Warning

WARNING: Risk of electric shock. Do not touch exposed circuits, pins or solder joints during operation. Ensure the power supply matches the rated voltage (DC 3.3V-5V, refer to the nameplate for details). Disconnect power before wiring or maintenance.

2.2. Electrostatic Discharge (ESD) Warning

CAUTION: This product is electrostatically sensitive. Handle with an anti-static wristband or on an anti-static mat. Avoid contact with static sources (such as plastic, woolen fabrics) to prevent component damage.

2.3. Environmental Safety Warning

WARNING: Keep away from flammable, explosive, corrosive substances and water. Do not use in high temperature (exceeding 40°C), high humidity (exceeding 80%) or dusty environments.

2.4. Operational Safety Warning

DANGER: Incorrect wiring or overloading may cause fire, permanent damage to the product or personal injury. Do not modify the circuit layout, replace chips or alter firmware without authorization.

2.5. Usage Restrictions

  • For R&D, prototyping, and educational purposes only. Not designed or certified for critical applications including but not limited to medical devices, life-support systems, industrial control core equipment, automotive safety components, aerospace devices, or power grid infrastructure.
  • Prohibited for use by minors under 16 years of age without direct supervision from personnel with professional electronic circuit knowledge and experience.
  • Do not operate at full load continuously for more than 8 hours. Allow intermittent cooling periods (at least 30 minutes after 8 hours of continuous use) to prevent component overheating and aging.
  • Unauthorized modification, disassembly, repair, or reassembly of the product will void EU compliance certifications (CE, RoHS) and product warranty. Any damage caused by non-compliant operations shall be the sole responsibility of the user.
  • Not suitable for outdoor use or harsh environments such as strong electromagnetic interference (EMI), extreme temperature fluctuations (-10°C below zero or 60°C above), or high-altitude low-pressure conditions.
  • Do not use the product in conjunction with non-compliant power supplies or accessories that fail to meet EU LVD (Low Voltage Directive) requirements.

WARNING: TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES, OR PLAY PENS. THIS BAG IS NOT A TOY.

3. Package Contents

Verify that all items are present in your package:

  • 1 x T-Display-S3 Module (1.43 inch AMOLED)
  • 1 x Power Cable (JST 2P 1.25mm)
  • 2 x Double Row Pin Headers
LILYGO T-Display-S3 1.43 inch module and accessories neatly packed in a clear plastic case
Figure 3: Package contents for the 1.43 inch T-Display-S3 module.

4. Setup Instructions

4.1. Initial Connection

  1. Connect the T-Display-S3 module to your computer using a USB Type-C cable. This will provide power and enable data communication for programming.
  2. If using an external battery, connect it to the JST 2P 1.25mm connector. Ensure correct polarity.
  3. Attach the provided pin headers to the module if you intend to use it on a breadboard or with custom wiring.

4.2. Development Environment Setup

The LILYGO T-Display-S3 supports development using Arduino IDE, PlatformIO-IDE, and ESP-IDF. For detailed instructions on setting up your preferred development environment and flashing firmware, please refer to the official LILYGO GitHub repository:

https://github.com/Xinyuan-LilyGO/T-Display-S3-AMOLED-1.43-1.75

Pinout diagram for LILYGO T-Display-S3 AMOLED 1.43 inch module
Figure 4: Pinout diagram for the T-Display-S3 AMOLED 1.43 inch module.

4.3. QWIIC Connection

The module includes a QWIIC connector for easy integration with compatible sensors and modules. Ensure proper connection and refer to the QWIIC documentation for specific module usage.

5. Operating Instructions

5.1. Power On/Off

The module powers on automatically when connected to a USB power source or a charged battery. There is no dedicated power switch. To power off, disconnect the power source.

5.2. Using the Touch Display

The 1.43-inch AMOLED display features capacitive touch functionality. Interact with the display by gently touching the screen. The touch controller provides coordinates and finger count, which can be read through your programmed application.

5.3. SD Card Usage

Insert a Micro SD card into the designated slot for data storage. Ensure the card is formatted correctly (e.g., FAT32) for your application. The SD card interface uses pins CS IO38, MOSI IO39, MISO IO40, and SCLK IO41.

5.4. Reset Button

A reset button is provided on the board to restart the ESP32-S3 microcontroller. Press it briefly to perform a soft reset.

5.5. Battery Voltage Detection

The module includes a battery voltage detection feature accessible via IO04, allowing your application to monitor the connected battery's charge level.

5.6. Real-Time Clock (RTC)

The integrated PCF8563 RTC provides accurate timekeeping. It communicates via I2C using pins INT IO09, SDA IO07, and SCL IO06.

6. Maintenance

6.1. Cleaning

To clean the module, gently wipe the display and board with a soft, dry, anti-static cloth. Avoid using liquids or abrasive materials. Ensure the device is powered off before cleaning.

6.2. Storage

Store the module in a dry, dust-free environment, away from direct sunlight and extreme temperatures. Keep it in its original anti-static packaging when not in use to prevent ESD damage.

6.3. Environmental Conditions

As per the environmental safety warning, avoid exposing the module to temperatures exceeding 40°C, humidity exceeding 80%, or dusty/corrosive environments.

7. Troubleshooting

7.1. Module Not Powering On

  • Ensure the USB Type-C cable is securely connected to both the module and a working power source (e.g., computer USB port, 5V USB adapter).
  • If using a battery, verify it is charged and correctly connected to the JST connector.
  • Check the USB cable for damage. Try a different cable if available.

7.2. Display Not Working

  • Confirm the module is powered on.
  • Ensure your firmware includes the correct display initialization code and drivers (e.g., Arduino_GFX library).
  • Try resetting the module using the onboard reset button.

7.3. Wi-Fi/Bluetooth Connectivity Issues

  • Verify your code correctly initializes and configures the Wi-Fi or Bluetooth radio.
  • Check for strong electromagnetic interference in the operating environment.
  • Ensure your antenna (if external) is properly connected.

7.4. SD Card Not Detected

  • Ensure the Micro SD card is fully inserted into the slot.
  • Verify the SD card is formatted correctly (e.g., FAT32).
  • Check your code for proper SD card initialization and file system access.

For further assistance, consult the LILYGO GitHub repository or community forums.

8. Specifications

Feature Specification
MCU ESP32-S3R8 Dual-core LX7 microprocessor
Wireless Connectivity 2.4 GHz Wi-Fi & Bluetooth 5 (LE)
Flash Memory 16MB
PSRAM 8MB (Octal SPI)
Display Type AMOLED
Display Size 1.43-inch
Display Resolution 466x466 px
Display Driver IC SH8601
Display Bus Interface QSPI
Touch Screen Capacitive
SD Card Support Micro SD Card (CS IO38, MOSI IO39, MISO IO40, SCLK IO41)
USB Interface USB Type-C
USB Charging Voltage 5V 500mA
Battery Voltage Detection IO04
Real-Time Clock (RTC) PCF8563 (INT IO09, SDA IO07, SCL IO06)
QWIIC Connector Yes
Dimensions (L x H) 45mm x 11mm
Specifications for T-Display-S3 AMOLED 1.43 inch module
Figure 5: Detailed specifications for the T-Display-S3 AMOLED 1.43 inch module.
Dimensions of the LILYGO T-Display-S3 1.43 inch module
Figure 6: Dimensions of the LILYGO T-Display-S3 1.43 inch module (Length: 45mm, Height: 11mm).

9. User Tips

  • Always refer to the official LILYGO GitHub repository for the latest code examples, libraries, and documentation.
  • When experimenting with new code or hardware configurations, start with minimal connections and gradually add components to simplify troubleshooting.
  • Consider joining online forums or communities dedicated to ESP32 development for peer support and project ideas.
  • For battery-powered projects, optimize your code for low power consumption to extend battery life.

10. Warranty and Support

Unauthorized modification, disassembly, repair, or reassembly of the product will void any applicable warranty. Any damage caused by non-compliant operations is the sole responsibility of the user.

For technical support, detailed documentation, and community resources, please visit the official LILYGO GitHub repository:

https://github.com/Xinyuan-LilyGO/T-Display-S3-AMOLED-1.43-1.75

An additional user manual in PDF format may be available for download at: LILYGO T-Display-S3 User Manual (PDF)

11. Manufacturing Process Video

Watch a short video showcasing the manufacturing process of similar electronic components:

Video 1: Overview of the manufacturing process for electronic modules.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.