YOFIDRA 960W Electric Mini Table Saw

1. Introduction

Thank you for choosing the YOFIDRA 960W Electric Mini Table Saw. This multi-functional woodworking desktop saw is designed for precision cutting in various DIY projects. Its compact and portable design, combined with adjustable cutting features, makes it an ideal tool for hobbyists and professionals alike. Please read this manual thoroughly before operation to ensure safe and efficient use of the product.

Image: YOFIDRA Mini Table Saw and included accessories.

2. General Safety Instructions

Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury when using power tools.

• Read the Manual: Understand all instructions and warnings before operating the saw.
• Wear Eye Protection: Always wear safety goggles or safety glasses with side shields.
• Wear Hearing Protection: Use earplugs or earmuffs during operation.
• Wear Appropriate Clothing: Avoid loose clothing, jewelry, and long hair that can get caught in moving parts.
• Keep Work Area Clean: Cluttered areas invite accidents.
• Do Not Operate in Hazardous Environments: Do not use power tools in damp or wet locations, or expose them to rain.
• Keep Children Away: All visitors should be kept a safe distance from the work area.
• Secure Workpiece: Always clamp or otherwise secure the workpiece to prevent movement during cutting.
• Avoid Accidental Starting: Ensure the switch is in the OFF position before plugging in the tool.
• Maintain Tools with Care: Keep cutting tools sharp and clean for better and safer performance.
• Disconnect Power: Always disconnect the power plug from the power source before making any adjustments, changing accessories, or storing the tool.
• Use Correct Tool: Do not force small tools or attachments to do the job of a heavy-duty tool.
• Check for Damaged Parts: Before further use, carefully check the tool for proper operation and intended function.

3. Package Contents

Please check the contents of your package against the list below. Note that specific accessories may vary based on the purchased pattern (Black or White).

Pattern 1: Black Table Saw Package

• 1x Electric Table Saw
• 1x Flexible Shaft
• 1x Drill Chuck
• 1x Sandpaper Tray
• 10x Sandpaper
• 1x Sponge Wheel
• 1x Wool Wheel
• 1x Emery Saw Blade
• 1x Resin Saw Blade
• 1x High Speed Steel Saw Blade
• 1x Woodworking Saw Blade
• 4x Connecting Rod
• 5x Drill Bit (0.8-3.0 mm)
• 5x Grinding Wheel Grinding Head
• 1x Wire Brush
• 2x Double Mesh Cutting Piece
• 5x Small/Large Sandpapering
• 5x Wool Polishing Head Large/Small
• 36x Resin Cutting Discs
• 108x Abrasive Paper
• 1x Grinding Paste
• 1x Screwdriver
• 1x Millstone
• 1x T-Screwdriver
• 4x L-shaped Screwdriver (Allen Wrench)
• 1x Power Supply

Pattern 2: White Table Saw Package

• 1x Mini Table Saw
• 1x 7-Level Adjustable Power Supply
• 1x Power Cord
• 1x PCB Cutting Blade
• 1x High-speed Steel Saw Blade
• 1x Alloy Saw Blade
• 1x Resin Saw Blade
• 1x Dust Extraction Tube
• 1x Allen Wrench
• 1x Brush

4. Product Overview

Familiarize yourself with the components of your YOFIDRA Mini Table Saw.

Image: Key components of the Mini Table Saw.

• Saw Blade: The primary cutting tool.
• Safety Bezel (Acrylic Safety Baffle): Transparent guard for cutting safety.
• Aluminum Alloy Angle Pusher: Used for guiding workpieces at specific angles.
• Vents: For heat dissipation during operation.
• Aluminum Alloy Backer: Provides support and stability.
• Switch: Power ON/OFF control.
• Non-slip Feet: Rubber pads on the base for stability and shock absorption.
• Chip Discharge Port: For sawdust and debris removal.
• Reserved Motor Hole: For potential motor upgrades or maintenance.
• Power Socket: For connecting the power supply.

Blade Types

The saw supports various blade types for different materials:

Image: Different blade types for various cutting needs.

• PCB Cutting Blades: For cutting printed circuit boards.
• High Speed Steel Saw Blade: Suitable for general purpose cutting of softer materials.
• Alloy Saw Blade: For harder materials and more demanding cuts.
• Resin Saw Blades: Ideal for cutting plastics and other delicate materials.

5. Setup

5.1 Initial Assembly

Ensure the table saw is placed on a stable, level surface. Connect the power supply to the saw's power socket and then plug it into a suitable electrical outlet.

5.2 Replacing the Saw Blade

Follow these steps to safely replace the saw blade:

Image: Saw blade replacement steps.

1. Loosen Screws: Loosen the two screws securing the saw blade cover.
2. Insert Hex Wrench: Insert the provided hex wrench into the shaft hole to lock the shaft.
3. Loosen Blade Screw: Use another wrench to loosen the screw holding the saw blade in place.
4. Replace Blade: Once the screw is loose, remove the old blade and install the new one. Tighten the screw securely and reattach the saw blade cover.

5.3 Adjusting Blade Lift Range

The blade lift range can be adjusted from 0-15mm.

Image: Blade lift adjustment mechanism.

• To Raise Blade: Turn the adjustment knob/screw clockwise.
• To Lower Blade: Turn the adjustment knob/screw counterclockwise.

6. Operating Instructions

6.1 Powering On and Speed Adjustment

Press the red switch to turn the saw ON. The power supply features 7 distinct speed settings. Adjust the speed according to the material being cut and the desired finish.

Image: High-Powered Motor and 7-Level Adjustable Power Supply.

6.2 Adjusting Cutting Angle and Depth

The saw allows for precise angle adjustments from 0° to 90° and a cutting depth of 0-16mm.

Image: Cutting depth and angle adjustment features.

• Angle Adjustment: Use the aluminum alloy angle pusher and the integrated ruler to set the desired cutting angle. Secure it firmly before cutting.
• Cutting Depth Adjustment: Adjust the blade height using the mechanism described in Section 5.3 to achieve the desired cutting depth (up to 16mm).

6.3 General Cutting Tips

• Always ensure the workpiece is stable and properly guided.
• Use the appropriate blade for the material you are cutting.
• Feed the material slowly and steadily into the blade.
• Do not force the saw; let the blade do the work.
• Utilize the transparent safety baffle to protect against debris.
• For fine work or polishing, attach the flexible shaft tool and select the appropriate accessory.

Image: Versatile applications with the flexible shaft tool.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your table saw.

• Cleaning: After each use, disconnect the power and clean the saw. Remove sawdust and debris from the table, blade area, and vents using a brush or compressed air.
• Blade Care: Keep blades sharp and clean. Replace dull or damaged blades immediately.
• Lubrication: Periodically lubricate moving parts as recommended in the detailed product specifications (if applicable).
• Storage: Store the saw in a dry, clean, and secure location, out of reach of children.
• Power Cord: Inspect the power cord regularly for any damage. Do not use the saw if the cord is damaged.

8. Troubleshooting

This section addresses common issues you might encounter.

• Saw Not Turning On:
  - Check if the power cord is securely plugged into both the saw and the power outlet.
  - Ensure the power switch is in the 'ON' position.
  - Verify the power outlet is functional.
• Blade Not Cutting Effectively:
  - The blade might be dull; replace it with a sharp one.
  - Ensure you are using the correct blade type for the material.
  - Check if the cutting depth is set correctly.
  - Reduce the feeding speed.
• Excessive Vibration or Noise:
  - Ensure the saw is on a stable surface.
  - Check if the blade is properly installed and tightened.
  - Inspect the blade for damage or warping.
• Overheating:
  - Ensure the vents are clear of obstructions to allow for proper heat dissipation.
  - Avoid continuous heavy-duty operation without breaks.

If you encounter problems not listed here or if troubleshooting steps do not resolve the issue, please contact customer support.

9. Specifications

Below are the technical specifications for the YOFIDRA 960W Electric Mini Table Saw.

Image: Detailed product specifications.

10. User Tips

• Power Verification: The saw is rated at 960W. This power is suitable for a wide range of DIY and light woodworking tasks. Always ensure your power supply can handle the wattage.
• Blade Selection: Experiment with different blade types (PCB, High Speed Steel, Alloy, Resin) to find the best fit for your specific material and desired cut quality.
• Angle Precision: Take your time when setting the cutting angle. A precise angle ensures clean and accurate cuts.
• Dust Management: For the white model, utilize the dust extraction tube to keep your workspace cleaner and improve visibility during cutting.
• Flexible Shaft Use: The flexible shaft attachment (included with the black model) significantly expands the tool's versatility for detailed grinding, carving, and sanding tasks.

11. Warranty and Support

For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase. Refer to the seller's policy for specific warranty terms and conditions.