Freeman LD40

Contents

Freeman LD40 20V Cordless Concrete Strip Pin Nailer

Model: LD40

Brand: Freeman

1. Introduction

Thank you for choosing the Freeman LD40 20V Cordless Concrete Strip Pin Nailer. This powerful and versatile tool is designed for various fastening projects, offering cordless convenience and robust performance. It is ideal for construction, contractors, and DIY enthusiasts for applications such as pipes installation, drywall profile fixing, and securing wood or steel to concrete walls and cement.

Freeman LD40 Cordless Concrete Strip Pin Nailer
Figure 1: Freeman LD40 Cordless Concrete Strip Pin Nailer

2. General Safety Information

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury when using power tools. Read and understand all instructions before operating this tool.

  • Wear Eye Protection: Always wear ANSI Z87.1 compliant safety glasses with side shields.
  • Wear Hearing Protection: Prolonged exposure to noise can cause hearing damage.
  • Keep Work Area Clean: Cluttered areas invite injuries.
  • Dress Properly: Do not wear loose clothing or jewelry. Contain long hair.
  • Avoid Accidental Firing: Keep fingers off the trigger when not driving fasteners.
  • Disconnect Power: Always disconnect the battery pack before making adjustments, changing accessories, or storing the tool.
  • Use the Right Tool: Do not force the tool or attachment to do a job for which it was not designed.
  • Maintain Tools With Care: Keep tools sharp and clean for better and safer performance.
  • Store Idle Tools: When not in use, tools should be stored in a dry, high, or locked-up place, out of reach of children.

3. Product Overview

The Freeman LD40 is a 20V Lithium Ion powered cordless concrete nailer featuring a brushless motor for increased power and efficiency. It is designed for durability with an aircraft-grade aluminum piston and S7 steel drive blade, incorporating a patented anti-seize gear and soft-impact mechanism for extended drive blade life.

3.1. Key Components

  • Battery Pack: 20V Lithium Ion (2.0Ah or 4.0Ah compatible).
  • Magazine: Holds up to 33 plastic collated concrete nails.
  • Depth Adjustment: Tool-free adjustment for various applications.
  • Quick Release Magazine: For easy jam clearing.
  • No-Mar Safety Contact: Protects work surfaces.
  • Textured Rubber Grip: For comfortable and secure handling.

3.2. What's in the Box

The LD40 nailer typically includes the main unit, a battery, a charger, and a selection of nozzles for different applications. The specific contents may vary, but generally include:

  • Freeman LD40 Cordless Concrete Strip Pin Nailer
  • 20V Lithium Ion Battery (e.g., 2.0Ah or 4.0Ah)
  • Battery Charger
  • Various Multi-Purpose Nozzles (e.g., Universal, Pipe Clamp, Pipe Strap Clamp, Cable Wire Clip, M5/M8 Thread Concrete Pin, Concrete Nail, Threaded Stud)
Freeman LD40 with 11 different nozzles and accessories
Figure 2: Freeman LD40 with included nozzles and accessories

4. Specifications

AttributeValue
Model NumberLD40
TypeConcrete Nail Gun
MaterialStainless steel
Power SourceBattery (Lithium Ion)
Battery TypeLithium Ion
Charging Time45 min. (2.0Ah)
Type of Nail16~38mm (5/8"~1-1/2"), Φ2.7~3.0mm (Φ0.106"~0.118")
Max Magazine Capacity33 PCS
Nailing Capacity60~90 nails/min.
Energy Output90~120J
Cycles Per ChargeUp to 950 pcs (4.0Ah)
Size394x384x116mm (15.2"x4.53"x15.47")
Weight (W/O Battery)4.13kg (9.1 lbs)
ApplicationBuilding Construct, Windows and doors installation, Plumbing and water pipes installation
CertificateGS CE ETL
Warranty1 year

5. Setup

5.1. Battery Installation

  1. Ensure the battery is fully charged using the provided charger.
  2. Align the battery pack with the battery slot on the tool handle.
  3. Slide the battery into the slot until it clicks securely into place.
Video 1: Product demonstration showing battery installation, nail loading, and operation.

5.2. Loading Nails

  1. Ensure the battery is removed for safety.
  2. Pull back the magazine follower until it locks into place.
  3. Insert a strip of plastic collated concrete nails into the magazine, ensuring the nail heads are properly seated.
  4. Release the magazine follower to push the nails forward.
Compatible nails for Freeman LD40, showing sizes from 5/8 inch to 1-1/2 inch
Figure 3: Compatible nails for the LD40, showing various lengths and diameters.

5.3. Attaching Nozzles

The LD40 comes with various multi-purpose nozzles to adapt to different fastening tasks. To attach a nozzle:

  1. Ensure the tool is disconnected from power (battery removed).
  2. Select the appropriate nozzle for your application (e.g., Universal, Pipe Clamp, Threaded Stud).
  3. Screw the chosen nozzle onto the nose of the nailer until it is finger-tight and secure.
Diagram showing 11 different nozzles for various applications including universal, pipe clamp, cable clip, and threaded stud nozzles
Figure 4: Detailed view of the 11 different nozzles and their applications.

6. Operating Instructions

6.1. Nailing

  1. With the battery installed and nails loaded, press the tool firmly against the workpiece.
  2. Ensure the safety contact tip is fully depressed.
  3. Pull the trigger to drive a nail. The tool can drive 60-90 nails per minute.
Image showing the Freeman LD40 nailer in use, penetrating steel easily
Figure 5: The LD40 demonstrating strong nailing power, penetrating 6mm steel.

6.2. Depth Adjustment

The LD40 features tool-free depth adjustment, allowing you to control how deep the nail is driven into the material. This is crucial for achieving flush finishes or specific penetration depths.

  1. Locate the depth adjustment mechanism near the nose of the tool.
  2. Rotate the adjustment knob or lever to increase or decrease the driving depth. Test on a scrap piece of material to ensure the desired depth is achieved.
Detailed diagram of the LD40 showing depth adjustment, anodized magazine, quick release, and textured grip
Figure 6: Illustration of the tool-free depth adjustment feature.

6.3. Nailing Power Adjustment

The nailing power can be adjusted to suit different materials and nail types, with a maximum energy output of up to 120J. This is typically done by adjusting the air tank pressure (if applicable to the specific model's internal mechanism, or via a dedicated power setting).

Diagram showing adjustable nailing power settings with 6.5, 7.5, and 9 bar pressure, equivalent to 40, 50, and 65 series gas nailers
Figure 7: Nailing power adjustment based on pressure settings.

7. Maintenance

7.1. Clearing Jams

In the event of a nail jam:

  1. Immediately remove the battery pack.
  2. Locate the quick release magazine latch. Open the magazine to access the jammed fastener.
  3. Carefully remove the jammed nail and any debris.
  4. Close the magazine securely.
  5. Reinsert the battery and resume operation.

7.2. Drive Blade Replacement

The LD40 features an easy maintenance design for quick replacement of wearable parts like the drive blade.

  1. Remove the battery pack.
  2. Locate the screws securing the drive blade cover (typically 5 screws).
  3. Remove the screws and the cover.
  4. Carefully remove the old drive blade.
  5. Install the new drive blade, ensuring it is correctly seated.
  6. Replace the cover and secure it with the screws.
Diagram showing how to remove 5 screws to replace the drive blade for easy maintenance
Figure 8: Easy maintenance: Removing screws to replace the drive blade.

8. Troubleshooting

ProblemPossible CauseSolution
Nailer does not fireBattery not installed or discharged; Safety contact not fully depressed; No nails in magazine.Check battery charge and installation; Ensure contact tip is fully depressed against workpiece; Reload nails.
Nails jam frequentlyIncorrect nail size/type; Damaged nails; Magazine dirty or damaged.Use recommended nails; Inspect nails for damage; Clean magazine and check for damage.
Nails not driven flushInsufficient power setting; Depth adjustment too shallow.Increase power setting; Adjust depth setting deeper.
Nails driven too deepExcessive power setting; Depth adjustment too deep.Decrease power setting; Adjust depth setting shallower.

9. User Tips

No specific user tips were available from provided reviews or Q&A. Always refer to the general safety guidelines and manufacturer's instructions for optimal use and longevity of your tool.

10. Warranty and Support

10.1. Warranty Information

The Freeman LD40 Cordless Concrete Strip Pin Nailer comes with a 1-year warranty. Please retain your proof of purchase for any warranty claims. The warranty covers defects in materials and workmanship under normal use.

10.2. Customer Support

For technical assistance, troubleshooting, or warranty service, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.