1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Podofo 4G CarPlay Android Radio. This intelligent car system is designed to enhance your driving experience with advanced features such as GPS navigation, multimedia playback, and seamless smartphone integration. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

The image displays the main head unit of the Podofo 4G CarPlay Android Radio, showcasing its large IPS display and sleek design, ready for integration into a vehicle dashboard.
2. Package Contents
Before proceeding with installation, please verify that all items listed below are included in your package:

This image illustrates the complete packing list, including the main head unit, power cable, RCA cable, reversing input cable, USB cable, GPS antenna, 4G antenna (for V4Pro/Ultra/V8Ultra models), optional camera, Canbus decoder, and installation tools.
- Main Head Unit
- Power Cable
- RCA Cable
- Reversing Input Cable
- USB Cable
- GPS Antenna
- 4G Antenna (Only for V4Pro/Ultra/V8Ultra models)
- Canbus Decoder
- Installation Tools (Screwdriver, Plastic pry tool)
- Optional: Rear View Camera
3. Installation Guide
Professional installation is recommended. Ensure the vehicle's power is disconnected before starting the installation process.
3.1. Pre-Installation Check
Verify the compatibility of the unit with your vehicle (Renault Logan L90 2004-2009). Check the dimensions of the unit against your car's dashboard opening.

This diagram provides the precise measurements of the head unit and its mounting frame, showing a 9-inch display, with overall dimensions of 23.2cm (9.1 inches) width, 17.5cm (6.8 inches) height, and a base width of 25.1cm (7.4 inches) tapering to 40.7cm (16.0 inches).
3.2. Removing the Old Unit
- Carefully remove the trim panels around your existing car radio.
- Unscrew the mounting screws holding the old unit in place.
- Gently pull out the old unit and disconnect all wiring harnesses and antenna cables.
3.3. Wiring Connections
Connect the provided power cable, RCA cable, and other necessary cables to the corresponding ports on the new head unit and your vehicle's wiring harness. Ensure all connections are secure.
- Power Cable: Connect to the vehicle's power supply.
- RCA Cable: For audio/video output to external amplifiers or monitors.
- Reversing Input: Connect to the reverse gear signal and optional rear view camera.
- USB Cable: For connecting USB devices.
- GPS Antenna: Mount in a location with a clear view of the sky for optimal signal reception.
- 4G Antenna: (If applicable) Mount for optimal 4G network reception.
- Canbus Decoder: Connect if your vehicle requires it for steering wheel controls or other integrated functions.
3.4. Mounting the New Unit
- Slide the new Podofo radio into the dashboard opening.
- Secure it with the mounting screws.
- Reattach the trim panels.

This image shows a side-by-side comparison of a car dashboard "Before Installation" with the original radio and "After Installation" with the new Podofo Android Radio seamlessly integrated, demonstrating a clean and modern upgrade.
4. Operating Instructions
4.1. Initial Power On and Setup
- Turn on your vehicle's ignition. The unit should power on automatically.
- Follow the on-screen prompts for initial setup, including language selection, time zone, and network configuration.
4.2. CarPlay & Android Auto
Integrate your smartphone for navigation, music, calls, and more.

The image displays the user interface for both Apple CarPlay (for iOS devices) and Android Auto (for Android devices), showing how smartphones can be integrated with the car's display for enhanced functionality.
- For iOS System (CarPlay): Connect your iPhone via USB. The CarPlay interface will automatically launch.
- For Android System (Android Auto): Connect your Android phone via USB. Ensure Android Auto is installed on your phone.
4.3. WiFi and 4G Network
Access online content, navigation, and apps.

This image illustrates the unit's capability to connect to WiFi or 4G networks, enabling web browsing, online navigation, video streaming, and app downloads, with various app icons displayed on the screen.
- WiFi: Go to Settings > Network & Internet > Wi-Fi to connect to an available Wi-Fi network.
- 4G Network: (If supported by your model) Insert a 4G SIM card (not included) into the designated slot. Configure APN settings if necessary.
4.4. GPS Navigation
Utilize built-in GPS for real-time navigation.

The image shows the GPS navigation interface with a map displaying a route, current speed, and estimated time of arrival. Below, icons for Google Maps, iGO, Navitel, and Sygic indicate support for various navigation applications.
The unit supports various navigation apps like Google Maps, iGO, Navitel, and Sygic. With a WiFi connection, you can use real-time navigation.
4.5. RDS/MTK FM Radio
Enjoy your favorite radio stations.

This image displays the FM radio interface, showing frequency tuning (e.g., 99.00 MHz), station presets, and RDS (Radio Data System) information. The visual equalizer indicates sound customization options.
Tune into FM stations. Long press to save your favorite stations. RDS provides additional information like station name and program type.
4.6. Bluetooth Function (BT Function)
Hands-free calling and wireless music streaming.

The image shows the Bluetooth interface for connecting a phone, displaying an incoming call screen and options for BT Phone, Bluetooth settings, and BT Music playback.
- Go to Settings > Bluetooth and enable Bluetooth.
- Pair your smartphone with the unit.
- Once connected, you can make/receive calls and stream audio.
4.7. DSP Tuning (36EQ & HiFi)
Customize your audio experience.

This image illustrates the Digital Sound Processor (DSP) tuning software, featuring a 36-band equalizer, 10-band equalization, and sound type selection to optimize audio quality and compensate for original car speaker limitations.
Access the DSP settings to adjust frequency, 36-band equalization, 10-band equalization, and sound type to achieve optimal sound quality.
4.8. Intelligent AI Voice Control
Control functions using voice commands.

The image depicts the Intelligent AI Voice control feature, showing a cartoon robot icon and examples of voice commands such as "Open bluetooth," "Play next song," "Play popular music," "Send message to David," "Open Maps," and "Go to the nearby gas station."
Activate the AI voice assistant to control the player, open/close the mobile phone interface, open/close navigation, make calls, and other functions hands-free.
4.9. Dual Screen Display
Run two applications simultaneously.

This image demonstrates the dual screen display capability, showing two different applications running side-by-side: "MAP + Video Play" (navigation and video) and "Wifi + Music" (web browsing and music playback).
The unit supports split-screen functionality, allowing you to operate different functions simultaneously, such as navigation and video playback, or Wi-Fi browsing and music.
4.10. Steering Wheel Control
Control the unit conveniently from your steering wheel.

The image shows the "Steering Learn" interface within the unit's settings, where users can program the functions of their car's steering wheel buttons to control the radio, including volume, track skipping, calls, and navigation.
If your vehicle has steering wheel controls, you can configure them in the unit's settings (e.g., "Steering Learn") to control various functions like volume, track changes, and calls.
4.11. ADAS DVR Support
Enhance driving safety with advanced driver-assistance features.

This image illustrates the ADAS (Advanced Driver-Assistance Systems) DVR functionality, including Lane Departure Warning System (LDWS), Front Vehicle Departure Warning (FVDW), and Forward Collision Warning System (FCWS), which alert the driver to potential road hazards.
When connected to an optional ADAS DVR camera, the system can detect vehicles too close, provide lane departure warnings (LDWS), front vehicle departure warnings (FVDW), and forward collision warnings (FCWS).
4.12. Rear View Camera
Assist with parking and reversing.

The image shows the display when a rear view camera is active, providing a wide-angle (170°) view with parking guidelines. An optional camera is depicted below, along with a parking assist graphic.
The unit supports rear view camera input. When reversing, the display will automatically switch to the camera feed, providing a 170° wide field of vision and parking assistance lines.
5. Specifications
Below are the general specifications for the Podofo 4G CarPlay Android Radio. Note that specific features may vary by model variant (e.g., V2Plus, V4Plus, V8Ultra).

This comprehensive table details the specifications across various Podofo car radio models (V2Plus, V4Plus, V6, V4G, V4C/V6C, V4Pro, V8Ultra), including RAM/ROM, Core count, CPU, Screen resolution, Internet connectivity (Wi-Fi, 4G), Keyboard color, Cooling Fan, DSP, Navigation, EQ bands, Power amplifier, Audio format support, Online Radio, Radio Chip, Bluetooth version, Rear View Camera support, and other supported features like OBD2, USB, DVR, TMPS, DAB+, AUX.
General Specifications (Based on 2+64G CarPlay model)
| Feature | Specification |
|---|---|
| Brand Name | Inefala |
| Din | Double Din |
| RAM | 6G (Varies by model, e.g., 2G, 4G, 8G) |
| ROM | 128G (Varies by model, e.g., 64G) |
| Operating System | Android 10.0 OS |
| Processor Type | MTK |
| Processor Speed | 2.2GHZ/2.0GHZ/1.8GHZ/1.5GHZ (Varies by model) |
| Out Power | 4*45W |
| Voltage | 12 V |
| Item Weight | 2kg |
| Display Size | 9" |
| Resolution | 1280*720/1024*600 (Varies by model) |
| Tuner Type | RDS FM |
| Special Features | Built-In Speaker/Microphone, WiFi function, Support 4G Network, Support Can-Bus, Built-in GPS, Charger, Mobile Phone, MP3 players, Voice Control, DSP, CarPlay, Android Auto, Reversing Input, Split Screen, Support steering wheel control |
| Digital Media Format | Mp3, MP4, WMA, JPEG |
| Interface | 2 USB port |
| Certification | CE |
| Warranty | 1 YEAR |
6. Troubleshooting
If you encounter any issues, please refer to the following common problems and solutions:
| Problem | Possible Cause / Solution |
|---|---|
| Unit does not power on. | Check power cable connections. Ensure vehicle ignition is on. Check vehicle's fuse box. |
| No sound. | Check speaker wiring. Ensure volume is not muted or too low. Verify DSP settings. |
| GPS signal weak or inaccurate. | Ensure GPS antenna is mounted in a clear, unobstructed location. Update GPS maps if necessary. |
| CarPlay/Android Auto not connecting. | Use a high-quality USB cable. Ensure your phone's software is up to date. Reinstall Android Auto app on phone if needed. |
| Steering wheel controls not working. | Ensure Canbus decoder is correctly installed (if required). Perform "Steering Learn" calibration in settings. |
| Touch screen unresponsive. | Restart the unit. If problem persists, contact support. |
7. User Tips
- For optimal performance, keep the system software updated. Check for updates periodically in the settings menu.
- When using navigation, ensure you have downloaded offline maps for areas with poor network coverage.
- Customize the UI interface to your preference for a personalized experience. (Refer to Figure 2: Changeable UI interface)
- Regularly clean the screen with a soft, lint-free cloth to maintain clarity and responsiveness.

This image showcases various customizable user interface (UI) options available for different models (V8 Ultra, V4 Pro, V4 G, V4C/V6C, V4 Plus), allowing users to personalize the look and feel of their car machine.
8. Maintenance
- Screen Cleaning: Use a soft, dry, lint-free cloth to clean the display. For stubborn smudges, lightly dampen the cloth with water or a screen-safe cleaner. Avoid harsh chemicals.
- Software Updates: Periodically check for and install software updates to ensure optimal performance and access to new features.
- Cable Inspection: Occasionally inspect all connected cables for any signs of wear or damage.
- Temperature: Avoid exposing the unit to extreme temperatures, which can affect its lifespan and performance.
9. Warranty and Support
The Podofo 4G CarPlay Android Radio comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
For technical support, warranty claims, or service inquiries, please contact your retailer or the manufacturer's customer service. Refer to your purchase documentation for specific contact details.
Please retain your proof of purchase for warranty validation.