SOLAKAKA E9 Pro

Contents

SOLAKAKA E9 Pro MMO Vertical Mouse User Manual

Model: E9 Pro | Brand: SOLAKAKA

Introduction

Thank you for choosing the SOLAKAKA E9 Pro MMO Vertical Mouse. This manual provides detailed instructions to help you set up, operate, and maintain your new ergonomic gaming mouse. The E9 Pro is designed to offer a blend of comfort and high performance for both gaming and daily work, featuring a PAW3395 sensor, 10 programmable side buttons, and tri-mode connectivity.

Package Contents

Please verify that all items are present in your package:

  • SOLAKAKA E9 Pro Mouse x1
  • USB-C Charging Cable x1
  • 2.4 GHz Receiver x1
  • User Manual x1
Contents of the SOLAKAKA E9 Pro box, including the mouse, USB-C cable, 2.4GHz receiver, and user manual.
Figure 1: What's in the Box

Setup

First-time Use Instructions

  1. Fully charge the mouse using the included USB-C charging cable. Refer to the 'Charging Instructions' section for details.
  2. Remove the protective film from the anti-slip pad on the bottom of the mouse.
  3. The mouse customization software is primarily compatible with Windows operating systems.

Driver Setup

To unlock the full customization potential of your E9 Pro mouse, including button remapping, macro functions, and advanced performance settings, you will need to install the driver software.

  1. Download the Driver: Visit solakakadriver.com to download the appropriate driver for your E9 Pro mouse.
  2. Online Driver (Web-based): Alternatively, you can access a web-based driver for quick access. Press and hold the DPI+ button for 3 to 5 seconds to automatically display the webpage. Follow the instructions to navigate to the link.
  3. Installation: Once downloaded, follow the on-screen prompts to install the software.
  4. Launch Software: After installation, open the software to begin customizing your mouse.

Note: The downloadable driver is currently not supported on macOS. However, the mouse is plug-and-play on Mac for basic functions. For advanced customization on Mac, you will need to configure settings on a Windows PC, as they are saved to the mouse's onboard memory.

Screenshot of the SOLAKAKA web driver interface showing key assignment, macro editor, DPI settings, and lighting options.
Figure 2: SOLAKAKA Web Driver Interface
Video 1: Quick Guide on SOLAKAKA E9 Pro Mouse Usage, covering driver setup, button customization, macro functions, performance settings, RGB lighting, and connection modes.

Operation

Button Layout

Diagram illustrating the button layout of the E9 Pro mouse, labeling Left Button, Scroll Wheel/Middle Button, Right Button, DPI+, DPI-, Forward, Backward, Return to Desktop, Logo Light/DPI Indicator, and Low Battery/Charging Indicator.
Figure 3: E9 Pro Button Layout

Connection Modes (Tri-Mode Connectivity)

The E9 Pro supports three connection modes: Bluetooth (BT), 2.4GHz Wireless, and Type-C Wired. Use the switch at the bottom of the mouse to select your desired mode.

Bottom view of the E9 Pro mouse showing the 2.4G/Off/BT switch and the mode button.
Figure 4: Mouse Bottom with Connection Mode Switch
  1. Bluetooth (BT) Mode Connection:
    • Switch the power to "BT" at the bottom of the mouse.
    • Press and hold the Mode Switch Button until the indicator flashes rapidly (pairing mode).
    • Open Bluetooth settings on your device, select "E9PRO BT1" (green light) or "E9PRO BT2" (blue light), and tap "Connect".
  2. 2.4GHz Wireless Connection:
    • Switch the power to "2.4G" at the bottom of the mouse and turn it on.
    • Remove the 2.4G receiver from its storage slot and plug it into your device's USB port. The mouse should connect automatically.
  3. Type-C Wired Connection:
    • Connect the mouse to your device using the provided USB-C cable. The mouse will function as a wired device and charge simultaneously.

DPI Switching

Adjust the mouse sensitivity (DPI) to match your preference or task:

  • Press the DPI- or DPI+ buttons on the mouse to cycle through preset DPI levels.
  • For fine-tuning and a wider range of DPI settings (up to 36000 DPI), use the driver software.

Polling Rate Switching

To change the polling rate:

  • Press and hold the Scroll Wheel + Right Button simultaneously for 3 seconds.
  • The polling rate can also be adjusted via the driver software.

RGB Lighting Adjustment

Customize the aesthetic of your mouse with various RGB lighting effects:

  • Press the Backward button + DPI- button simultaneously to cycle through lighting effects.
  • For advanced customization and to create your own desk aesthetic, use the driver software or web driver.

Button Customization and Macro Function

The E9 Pro features 10 programmable side buttons and allows extensive customization through its software:

  • Button Assignment: Open the driver software to assign different functions to each button, including the scroll up/down inputs. This adapts the mouse easily to your daily use or MMO gaming needs.
  • Macro Editor: The software allows you to record both keyboard and mouse actions and assign them to a single button. By fine-tuning your macros, you can execute complex combos or simplify repetitive tasks.
  • Onboard Memory: Once configured, your settings are saved to the mouse's onboard memory, making them accessible across different devices without needing the software running.

Quick Power Check

To check the battery level:

  • Press the Scroll Wheel + (DPI+) button simultaneously. Buttons 0-9 will illuminate green for 5 seconds, indicating the remaining battery percentage (e.g., if only buttons 0-2 illuminate green, this indicates 30% battery remaining).

Switch Custom Profiles

To switch between custom profiles:

  • Press the Scroll Wheel + (DPI-) button simultaneously. The blue light will flash N times, indicating the active configuration (e.g., 1 flash for configuration 1, 2 flashes for configuration 2).

Maintenance

Charging Instructions

To ensure optimal battery life and safe operation, please follow these charging guidelines:

  • Charging Indicator:
    • Slow flashing red: Charging
    • Solid green: Fully charged
    • Rapid flashing red: Low battery alert, please charge
  • Recommended Charging Method: It is recommended to use only the computer USB port to charge the mouse.
  • Avoid Fast Chargers: Do not use fast-charging mobile phone chargers to charge the item.
  • Avoid Inferior Adapters: Do not use inferior non-standard power adapters.
  • Avoid Over-Voltage/Over-Current: Do not use over-voltage and over-current power adapters.
  • Temperature: When charging, please keep away from high-temperature equipment.
  • Indicator Light: The indicator light is on when charging, and off when fully charged.
  • Long-term Storage: If not in use for a long time, please turn off the power switch.

Intelligent Power Saving

The E9 Pro is equipped with intelligent power-saving features to extend battery life:

  • Default Mode: RGB lighting automatically turns off when the mouse is moved.
  • Always On Mode: Enable "Always On" mode via software for constant lighting. Note that this increases power consumption; switch to wired mode when the battery is low to avoid input delay.
  • Sleep Modes:
    • Sleep Mode (Lights Off): After 1 minute of inactivity.
    • Standby Mode: After 3 minutes of inactivity.
    • Deep Sleep Mode: After 20 minutes of inactivity.

Troubleshooting

  • Mouse Pointer Not Moving:
    • Ensure the 2.4GHz receiver is not blocked by metal surfaces.
    • Try using a USB 2.0 extension cable for the receiver.
    • Reinsert the receiver firmly into the USB port.
    • Charge the mouse and check if the red indicator lights up.
  • Bluetooth Connection Fails:
    • Make sure your system supports Bluetooth 5.0 or above.
    • Remove any existing "E9 PRO Mouse" entries from your device's Bluetooth list and attempt to pair again.
    • Restart Bluetooth on your device.
  • Unstable Cursor:
    • Switch to a dark-colored mouse pad for better tracking.
    • Disable "Straight Line Correction" in the driver software if enabled.
    • Check if DPI + Polling Rate are set too high for your usage.
    • Charge the mouse if the battery is low.
  • Software Displays "Device not connected":
    • Switch to 2.4 GHz wireless or wired mode (Bluetooth does not support advanced configuration).
    • Grant browser permissions if using the web driver – it requires access to HID devices (accept the pop-up in Chrome/Edge).
    • Close other mouse software (e.g., Logitech G HUB, Razer Synapse) to avoid conflicts.
    • Unplug and re-plug the USB receiver, then refresh the page.
  • Settings Don't Work or High Latency over Bluetooth:
    • Protocol Limitation: Bluetooth only supports basic functions. Configure complex macros in 2.4G/wired mode first, then switch back to Bluetooth.
    • Reduce Latency: Stay within 1 meter of your computer and away from Wi-Fi routers or other 2.4GHz interference.
  • How to Restore Factory Settings:
    • Via Software: In the driver software, navigate to "Restore Factory Defaults" and save to the device.
    • Via Hardware: Press and hold the Scroll Wheel and Mode Switch Button for 3 seconds. Alternatively, press and hold the DPI+ and Mode buttons for 5 seconds while plugging in the USB cable.
  • Mac Compatibility and Side Button Configuration:
    • The E9 Pro is plug-and-play on Mac with all basic functions (click, scroll, side buttons).
    • For advanced button customization on Mac, you will need to use the Windows software for the initial setup. Once configured, settings are saved to the mouse’s onboard memory and remain fully functional on Mac without any additional software.
    • If you only have a Mac, you can temporarily borrow a Windows PC to configure the mouse. The settings will be permanently saved to the mouse and work across all devices.

Specifications

Comparison table for E9 and E9 Pro models, detailing sensor, polling rate, DPI, ACC, IPS, On Board Memory, Battery, and Weight.
Figure 5: E9 & E9 Pro Series Comparison
SOLAKAKA E9 Pro Product Specifications
ParameterDetails
ModelE9 Pro
MaterialPlastic
Battery Capacity1000 mAh
Mouse Size (L x H x W)133±0.5 mm x 73±0.5 mm x 89±0.5 mm
Mouse Weight97±3g (excluding receiver)
Lighting TypeRGB
Connection ModesType-C wired / 2.4GHz wireless / Bluetooth
Compatible SystemsWindows / Mac / Linux
Compatible DevicesPC / Laptop / Tablet
Sleep Mode (Lights Off)1 minute
Standby Mode3 minutes
Deep Sleep Mode20 minutes
Sensor ModelPixart 3395
Acceleration50 G
DPI Settings800/1200/1600/2400/3200/6400 (Adjustable via software by ±20%, ranging from 100DPI to 36000DPI)
Tracking Speed (IPS)650 ips (inches per second)
Polling Rate1000Hz/2000Hz/4000Hz/8000Hz (BT mode only supports 250Hz)
Left/Right Button Lifespan80,000,000 clicks
Middle Button Lifespan10,000,000 clicks

User Tips

Based on user experiences, here are some helpful tips for your E9 Pro mouse:

  • Web Configurator: The mouse features a convenient web configurator for its onboard driver, eliminating the need for local software installation for basic customization.
  • Extensive Remapping: All keys, including scroll up/down inputs, can be remapped to suit your workflow or gaming style.
  • Hand Size Consideration: Users with hands between medium and large glove sizes might find the mouse slightly small. Consider using 3D mouse grips for a more tailored fit.
  • Comfort for Extended Use: Many users find the E9 Pro very comfortable for hours of use, making it suitable for long gaming sessions or work.
  • Intuitive Software: The customization software is generally intuitive and offers a comprehensive set of features.
  • Lightweight Design: The mouse is noted for its lightweight design, contributing to reduced fatigue during use.
  • Bluetooth Performance: Bluetooth connectivity offers good response, especially when used with a motherboard's built-in Bluetooth.
  • Macros for Productivity: The macro capabilities are highly effective for improving work efficiency, in addition to gaming.
  • Onboard Memory: Settings are saved directly to the mouse's onboard memory, ensuring your custom configurations work across different devices without additional software.
  • Check Ribbon Cable: In rare cases, the thumb button ribbon cable might detach during transit. This is usually a quick fix.
  • Software Scaling: Some users have noted that the GUI program might not scale optimally on low screen resolutions in Windows.

Warranty and Support

For any issues with installing or using software drivers, or for further assistance with your SOLAKAKA E9 Pro mouse, please contact our after-sales service. Refer to your purchase documentation for contact details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.