1. Product Overview
The JIKONG Smart Active Battery Management System (BMS) is designed for large-capacity series lithium battery packs. It integrates voltage acquisition, high-current active balancing, overcharge, over-discharge, overcurrent, over-temperature protection, coulomb meter, Bluetooth communication, and optional GPS remote functions. This BMS is compatible with Li-ion, LiFePO4, and LTO battery types.
The protection board utilizes energy transfer active balancing technology with independent intellectual property rights, achieving a continuous balance current of 1A or 2A. This high-current active equalization technology ensures battery consistency, improves battery range, and extends battery life.
A mobile application (APP) is available for Android and iOS, allowing users to monitor battery status, modify parameters, and control charge/discharge switches via Bluetooth. The compact design and comprehensive functionality make it suitable for various applications, including small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage, base station backup power, and solar power stations.
2. Key Features
The JIKONG Smart Active BMS offers a wide range of features to ensure optimal battery performance and safety:
- LED Bluetooth status indicator
- APP Bluetooth remote operation
- Battery capacity calculation
- High-precision voltage acquisition (±3mV)
- High-precision current acquisition
- Support for information screen display
- Accurate time logging
- Optional RS485 communication
- Optional CAN communication
- Optional ACC detection function
- Optional heating function
- Optional parallel function
- Optional alarm function
- Optional GPS communication
- Comprehensive protection functions:
- Charge overcurrent protection
- Charge overvoltage protection
- Charge over-temperature protection
- Charge low-temperature protection
- Discharge overcurrent protection
- Discharge undervoltage protection
- Discharge over-temperature protection
- Short circuit protection

3. Specifications
3.1. Basic Parameters
| Index | Parameter | Value | Unit |
|---|---|---|---|
| 1 | Supply voltage | 7.5-36 | V |
| 2 | Operating power consumption | <900 | mW |
| 3 | Operating temperature | -30-70 | °C |
| 4 | Maximum number of collection strings | 8 | String |
| 5 | Maximum balancing current | 1A / 2A | A |
| 6 | Maximum charging current | 200 | A |
| 7 | Maximum discharge current | 200 | A |
| 8 | Maximum instantaneous current | 400 | A |
| 9 | Maximum internal loop resistance | 0.35 | mΩ |
| 10 | Protective plate size | 152.25*127.26*15.6 | mm |
| 11 | Finished weight | 424 | g |
3.2. Default Parameters
The following table outlines the default parameters for various battery types. These can be adjusted via the APP.
| Parameter | Li-ion (Default) | LiFePO4 (Default) | LTO (Default) | Unit |
|---|---|---|---|---|
| Balancing initial voltage | 3 | 3 | 2 | V |
| Maximum balancing current | 1A / 2A | 1A / 2A | 1A / 2A | A |
| Unit overcharge voltage | 4.2 | 3.6 | 2.7 | V |
| Single overcharge protection recovery | 4.18 | 3.55 | 2.65 | V |
| Monomer undervoltage protection | 2.82 | 2.6 | 1.8 | V |
| Single undervoltage protection recovery | 2.85 | 2.65 | 1.85 | V |
| Automatic shutdown voltage | 2.8 | 2.5 | 1.7 | V |
| SOC-0% voltage | 2.9 | 2.6 | 1.85 | V |
| SOC-100% voltage | 4.18 | 3.5 | 2.65 | V |
| Trigger balancing differential pressure | 0.01 | 0.01 | 0.01 | V |
| Charging overcurrent protection delay | 30 | 30 | 30 | S |
| Charge overcurrent protection release time | 60 | 60 | 60 | S |
| Discharge overcurrent protection delay | 300 | 300 | 300 | S |
| Discharge overcurrent protection release time | 60 | 60 | 60 | S |
| Short-circuit protection delay | 5 | 5 | 5 | µS |
| Short circuit protection release time | 30 | 30 | 30 | S |
| Charging over-temperature protection temperature | 70 | 70 | 70 | °C |
| Charge over-temperature restore temperature | 60 | 60 | 60 | °C |
| Discharge over-temperature protection temperature | 70 | 70 | 70 | °C |
| Discharge over-temperature recovery temperature | 60 | 60 | 60 | °C |
| Charging low-temperature protection temperature | -20 | -20 | -20 | °C |
| Charge low-temperature restore temperature | -10 | -10 | -10 | °C |
| MOS Over-temperature protection temperature | 100 | 100 | 100 | °C |
| MOS Over-temperature protection recovery temperature | 80 | 80 | 80 | °C |
| Device address | 0 | 0 | 0 | / |

4. Installation and Wiring
The JIKONG JK-BxA8S-20P series protection board is suitable for 3-8 series lithium battery packs. The wiring method varies depending on the number of cells in the battery pack. Always ensure all cables are connected correctly before powering on the BMS.
4.1. General Installation Steps
- Connect all balance cables to the BMS.
- Insert the main cable into the BMS.
- Connect the B-line (total negative electrode) and P-line (total positive electrode) to the battery.
4.2. Wiring Diagrams


4.3. Interface Definition
The BMS features various connectors and pins for different functions. Refer to the following tables for detailed pin definitions:
P1: Balance and Acquisition Interface (XH-10AW-2.54)
| Pin Number | Name | Definition |
|---|---|---|
| 1 | B- | Total negative battery |
| 2 | B1 | The first battery positive |
| 3 | B2 | The second battery positive |
| 4 | B3 | The third battery positive |
| 5 | B4 | The fourth battery positive |
| 6 | B5 | The fifth battery positive |
| 7 | B6 | The sixth battery positive |
| 8 | B7 | The seventh battery positive |
| 9 | B8 | The eighth battery positive |
| 10 | B+ | Protection board power supply, connected to the battery |
P2: Buzzer Interface (A1254WF-2A, Optional)
| Pin Number | Name | Definition |
|---|---|---|
| 1 | GND | Buzzer power negative |
| 2 | VCC | Buzzer power supply positive |
P3: Communication Interface (A1254WF-4A, Optional)
| Pin Number | Name | Definition |
|---|---|---|
| 1 | CAN L | CAN signal negative terminal |
| 2 | CAN H | CAN signal positive terminal |
| 3 | RS485 A | RS485 signal positive terminal |
| 4 | RS485 B | RS485 signal negative terminal |
P4: GPS Interface (1.25T-4PWT)
| Pin Number | Name | Definition |
|---|---|---|
| 1 | GND | Power/signal ground |
| 2 | RX | UART RX, 3.3V |
| 3 | TX | UART TX, 3.3V |
| 4 | VGPS | Power output, voltage close to B+ |
P5: 4 External Optional Temperature Interface (HY2.0-4P)
| Pin Number | Name | Definition |
|---|---|---|
| 1 | T5A | Fifth temperature sensor pin A |
| 2 | T5B | Fifth temperature sensor pin B |
| 3 | T4A | Fourth temperature sensor pin A |
| 4 | T4B | Fourth temperature sensor pin B |
P6: Temperature Interface (HY2.0-4P)
| Pin Number | Name | Definition |
|---|---|---|
| 1 | T2A | Second temperature sensor pin A |
| 2 | T2B | Second temperature sensor pin B |
| 3 | T1A | First temperature sensor pin A |
| 4 | T1B | First temperature sensor pin B |
P7: Display Interface (A1254WF-6A)
| Pin Number | Name | Definition |
|---|---|---|
| 1 | VCC | Display power output |
| 2 | A | The display RS485 signal is positive |
| 3 | B | Display RS485 signal negative |
| 4 | GND | Negative terminal |
| 5 | K+ | Activate the positive signal |
| 6 | K- | Activation signal negative electrode |
P8: Parallel Interface (A1254WF-3A, Optional)
| Pin Number | Name | Definition |
|---|---|---|
| 1 | P-status | Parallel module status signal |
| 2 | P-EN | Parallel module enable signal, output low level to turn on parallel module |
| 3 | GND | Signal ground |
P9: ACC Interface (A1254WF-5A, Optional)
| Pin Number | Name | Definition |
|---|---|---|
| 1 | ACC+ | ACC Positive |
| 2 | ACC- | ACC Negative |
| 3 | NC | Empty |
| 4 | C_Detect+ | The charger output 12V positive |
| 5 | C_Detect- | The charger output 12V negative |

5. Operation
5.1. Device Activation
Before powering on the protection board, ensure the balance cable is properly connected and that P- and B- are correctly wired. Verify the protection board is securely fixed to the battery pack. Incorrect connections can lead to malfunctions or damage.
The BMS is designed for charging activation. After battery assembly, connect the charger (with voltage 2V higher than battery voltage) to activate the protection board. Alternatively, if a display screen and button are installed, the device can be activated by inserting the cable into the display interface and pressing the button.
5.2. APP and Display Operation
The JIKONG mobile APP supports Android and iOS. Download the APP by scanning the QR code provided in the manual (Android Version 7 minimum required). The APP allows you to:
- Check real-time battery working status.
- Modify protection board parameters.
- Control charge and discharge switches.
The BMS also supports PC software and dedicated display screens for monitoring and interaction.


5.3. Active Balancing
The active balancing feature transfers energy from higher-voltage cells to lower-voltage cells to achieve voltage balance with minimal energy loss. Active balancing operates continuously when a voltage difference above the set threshold is detected, whether charging, discharging, or idle.
Users can set the balance trigger pressure difference (mV) and adjust the balance current via the APP. It is recommended that the balance current does not exceed 0.2C of the battery capacity. If not needed, the balancing function can be turned off in the BMS control page of the APP.

5.4. Communication Functions
The BMS supports optional CAN and RS485 communication functions. Users can select the desired communication protocol and set the address via the APP. The BMS is compatible with mainstream inverter communication protocols.

6. Protection Functions and Troubleshooting
The BMS incorporates various protection mechanisms to safeguard the battery and ensure safe operation. When a protection event occurs, the BMS will take action (e.g., shut down charging/discharging) and attempt to recover once conditions return to normal.
6.1. Overvoltage Protection
The BMS includes charge overvoltage protection. If any cell voltage exceeds the set overcharge protection voltage during charging, the BMS will stop charging. Charging resumes when all cell voltages drop below the overcharge recovery voltage.
6.2. Undervoltage Protection
Discharge undervoltage protection is standard. If any cell voltage falls below the set undervoltage protection voltage during discharge, the BMS will stop discharging. Discharge resumes when all cell voltages rise above the undervoltage recovery voltage. If any cell voltage drops below the automatic shutdown voltage, the BMS will shut down completely.
6.3. Overcurrent Protection
The BMS provides charge and discharge overcurrent protection. If the current exceeds the set continuous current for a specified delay, the BMS will stop the respective operation. It will resume after the overcurrent release time. Note: Maximum continuous discharge current should not exceed 200A.
6.4. Temperature Protection
The BMS features charge/discharge over-temperature and low-temperature protection. If the battery temperature exceeds the set limits, the BMS will stop charging or discharging. Operations resume when temperatures return to the safe range. For cold environments, the optional heating function is recommended.
6.5. Short Circuit Protection
Short circuit protection is standard. The BMS will immediately stop operation upon detecting a short circuit. Users can adjust the short circuit protection delay and recovery time via the APP. If a short circuit occurs during initial charging or connecting a load, increasing the delay time might resolve issues caused by high instantaneous currents from the charger or load capacitance.
6.6. Emergency Switch
In case of critical issues like over-temperature, over-discharge, over-charge, or cell string drops during normal use, activating the emergency switch in the APP's BMS control page will enable charge and discharge for 30 minutes. This provides an emergency operational window. The BMS will continue to operate for the 30-minute period, even if cell voltages reach the automatic shutdown level, to prevent sudden power loss.
6.7. Intelligent Sleep
The intelligent sleep function helps reduce the BMS's self-consumption by shutting down when in standby (charging/discharging current less than 1A for 26 consecutive hours). The BMS can be reactivated by pressing a button or connecting a charger.
7. Dimensions
The JIKONG JK-BxA8S-20P series protection board has the following dimensions:
- JK-B2A8S20P: 152.25mm (Length) × 127.26mm (Width) × 15.6mm (Height)
- JK-B1A8S10P: 153.9mm (Length) × 87mm (Width) × 17.6mm (Height)
- JK-B2A8S30P: 174.77mm (Length) × 127.26mm (Width) × 17.6mm (Height)



8. User Tips
- Verify Wiring: Always double-check all balance cables and main power connections (P- and B-) before initial power-on to prevent damage.
- Parameter Customization: Utilize the mobile APP to fine-tune protection parameters (e.g., overvoltage, undervoltage, currents, temperatures) to match your specific battery type and application needs.
- Cold Weather Operation: If operating in low-temperature environments, consider using the optional heating function to maintain battery performance and longevity.
- Regular Monitoring: Periodically check the battery status via the APP or dedicated display to ensure optimal operation and identify any potential issues early.
- Firmware Updates: Keep the APP and BMS firmware updated to benefit from the latest features and improvements.
9. Support and Documentation
For detailed parameter settings and advanced configurations, please refer to the comprehensive "Instructions for Setting Protection Board Parameters" document, which can be found on the JIKONG website or accessed via the APP.
For further assistance, please contact JIKONG customer support.
A PDF version of the user manual is available for download: User Manual (PDF)