1. Introduction
Thank you for choosing the SKMEI 2647 Digital Watch. This manual provides detailed instructions for setting up, operating, and maintaining your watch. Please read this manual carefully to ensure proper use and to enjoy all the features of your new timepiece.
2. Safety Information
- Do not attempt to open the watch case or remove the back cover.
- Avoid exposing the watch to extreme temperatures (hot or cold) or sudden temperature changes.
- Keep the watch away from strong magnetic fields.
- Clean the watch with a soft, dry cloth. Do not use chemical cleaners.
- While the watch is 30M water-resistant, it is suitable for washing hands, sweat, and light rain. Do not press any buttons underwater. Avoid prolonged submersion, showering, swimming, or diving with the watch.
3. Watch Components
The SKMEI 2647 Digital Watch features a rectangular case with a digital display and two control buttons.

This diagram illustrates the main display elements and button functions: Week, Date, Time, Alarm, Second, Light Button, and Mode Button.
Button Functions:
- Light Button: Activates the EL backlight for visibility in low-light conditions.
- Mode Button: Cycles through different watch modes (Time, Stopwatch, Countdown, Alarm, etc.) and is used for setting adjustments.
4. Initial Setup
4.1. Time and Date Setting
- In Time Mode, press and hold the Mode Button until the display starts flashing, indicating setting mode.
- Press the Light Button to cycle through the setting options (seconds, minutes, hours, 12/24 hour format, month, date, day of week).
- Use the Mode Button to adjust the selected value.
- Once all settings are adjusted, press the Light Button again to exit setting mode.
5. Operating Instructions
The SKMEI 2647 watch offers multiple functions accessible via the Mode Button.

This image highlights the primary functions of the watch.
5.1. Time Display (Normal Mode)
This is the default mode, displaying the current time, day of the week, and date.
5.2. EL Backlight
Press the Light Button to illuminate the display for a few seconds. This feature is useful in dark environments.

The watch display is illuminated for easy reading in low light.
5.3. Stopwatch Function (Chrono)
- From Time Mode, press the Mode Button once to enter Stopwatch Mode. The display will show 'ST' or '0:00:00'.
- Press the Light Button to start the stopwatch.
- Press the Light Button again to pause/resume.
- To reset, press the Mode Button while the stopwatch is paused.
- Press the Mode Button to return to Time Mode.
5.4. Alarm Setting (ALM)
- From Time Mode, press the Mode Button twice to enter Alarm Mode. The display will show 'ALM'.
- Press and hold the Mode Button until the alarm time starts flashing.
- Use the Light Button to select hours or minutes.
- Use the Mode Button to adjust the selected value.
- Press the Light Button to confirm and exit setting mode.
- To turn the alarm ON/OFF, press the Light Button in Alarm Mode (without holding).
5.5. Countdown Timer (CHM)
- From Time Mode, press the Mode Button three times to enter Countdown Mode. The display will show 'TR' or '0:00:00'.
- Press and hold the Mode Button until the countdown time starts flashing.
- Use the Light Button to select hours, minutes, or seconds.
- Use the Mode Button to adjust the selected value.
- Press the Light Button to confirm and exit setting mode.
- Press the Light Button to start/pause the countdown.
- When the countdown reaches zero, an alarm will sound.
6. Care and Maintenance
- Cleaning: Wipe the watch case and band regularly with a soft, dry cloth to remove dirt and sweat. For silicone bands, a damp cloth with mild soap can be used, then rinse and dry thoroughly.
- Water Resistance: The watch is 30M water-resistant. This means it can withstand splashes, rain, and brief immersion. However, it is not suitable for swimming, diving, or hot water activities (like showering or saunas) as steam can penetrate the seals. Do not operate buttons underwater.
- Battery Replacement: The watch uses a non-rechargeable battery (CR2016). When the display dims or functions become erratic, it's time for a battery replacement. It is recommended to have the battery replaced by a professional watch technician to ensure the water resistance seal is maintained.
- Storage: When not in use for extended periods, store the watch in a cool, dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or dim. | Low battery. | Replace the battery (CR2016). |
| Time is incorrect. | Time needs to be set or reset. | Refer to Section 4.1 for time setting instructions. |
| Buttons are unresponsive. | Watch might be in a locked mode or battery is very low. | Try replacing the battery. If still unresponsive, contact support. |
| Water inside the watch. | Water resistance compromised (e.g., buttons pressed underwater, exposure to hot water). | Immediately take the watch to a professional for inspection and repair to prevent further damage. |
8. Specifications

Detailed dimensions and basic information of the watch.
| Attribute | Detail |
|---|---|
| Brand Name | Skmei |
| Model Number | SKMEI 2647 |
| Item Type | Digital Wristwatches |
| Display Type | Digital |
| Movement | Digital |
| Case Material | Plastic |
| Case Shape | Rectangle |
| Case Thickness | 9.5mm |
| Case Width | 29.3mm |
| Dial Diameter | 29.3mm |
| Dial Window Material Type | Glass |
| Band Material Type | Silicone |
| Band Width | 20mm |
| Band Length | 25cm |
| Clasp Type | Buckle |
| Water Resistance Depth | 3Bar (30M) |
| Features | Stop Watch, Luminous, Chronograph, Complete Calendar, Multiple Time Zone, Alarm, Week Display |
| Functions | Time, Chrono, Alarm, Date, Week, EL Light, 12/24 hour clock, Countdown |
| Weight | 40.2g |
| Battery Included | Yes |
| Rechargeable Battery Included | No |
| Wireless | No |
| Voltage | <36V |
| Certification | CE |
| Boxes & Cases Material | No package |
| Origin | Mainland China |
| Suitable Audience | Men, women, boys, girls, unisex, students, couples |
9. User Tips
- Read the Manual: Familiarize yourself with all functions by reading this manual thoroughly.
- Practice Settings: Practice setting the time, alarm, and using the stopwatch/countdown functions a few times to become comfortable with the button operations.
- Battery Life: To maximize battery life, avoid excessive use of the EL backlight.
- Water Exposure: Always remember the 30M water resistance limits. It's best to remove the watch before showering or swimming to prevent accidental damage.
10. Warranty and Support
For any issues or inquiries regarding your SKMEI 2647 Digital Watch, please contact the retailer or manufacturer's customer support. Keep your purchase receipt as proof of purchase for warranty claims.
This product is CE certified, indicating compliance with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).