NOBLE LC-30SC

Contents

NOBLE LC-30SC Portable Commercial Carpet Cleaner User Manual

Model: LC-30SC | Brand: NOBLE

1. Introduction

Thank you for choosing the NOBLE LC-30SC Portable Commercial Carpet Cleaner. This powerful and versatile machine is designed for efficient cleaning of carpets and hard floors in both commercial and home environments. With its robust construction and user-friendly design, the LC-30SC provides deep cleaning capabilities to remove dirt and stains effectively. Please read this manual thoroughly before operating the machine to ensure safe and optimal performance.

NOBLE LC-30SC Portable Commercial Carpet Cleaner
Figure 1: NOBLE LC-30SC Portable Commercial Carpet Cleaner

2. Important Safety Instructions

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury.

  • Read all instructions before using the appliance.
  • Do not operate the machine with a damaged cord or plug.
  • Do not use outdoors or on wet surfaces.
  • Unplug from outlet when not in use and before servicing.
  • Do not allow to be used as a toy. Close attention is necessary when used by or near children.
  • Use only as described in this manual. Use only manufacturer's recommended attachments.
  • Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.
  • Keep cord away from heated surfaces.
  • Do not handle plug or appliance with wet hands.
  • Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
  • Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
  • Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
  • Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
  • Do not use without filters in place.

3. Specifications

Feature Specification
ModelLC-30SC (also referred to as LC-20SC in some documentation)
Capacity30L
Total Power1034W
Clean Water Capacity10L
Voltage220V-240V
Power of Water Pump34W
Power of Vacuum Motor1000W
Height720mm
Tank Diameter335mm
Mode of CoolingCirculating air cooling
Air Flow Rate53L/S
Vacuum Suction230mbar
Length of Cable7m
Hose Diameter40mm
Packing Dimensions (LxWxH)455x410x845mm
Net Weight15.8kg
Gross Weight17.5kg
Hose Gross Weight5.2kg
Pressure87PSI
ColorBlack

4. Product Components

The NOBLE LC-30SC carpet cleaner consists of the following main components:

  • Main Unit: Houses the motor, dirty water tank, and control panel.
  • Clean Water Tank: Separate tank for water and cleaning solution (10L capacity).
  • Vacuum Hose: Flexible hose for suction.
  • Spray Hose: Connects to the water pump for spraying cleaning solution.
  • Wand/Nozzle Assembly: Long handle with a spray nozzle and suction head for carpet cleaning.
  • Control Panel: Power switches for vacuum and pump.
  • Wheels: For easy mobility.
Detailed view of the LC-30SC carpet cleaner components
Figure 2: Main components of the LC-30SC cleaner

5. Setup Instructions

  1. Unpacking: Carefully remove all components from the packaging. Check for any damage.
  2. Attach Wheels: If not pre-assembled, attach the wheels to the base of the main unit.
  3. Connect Hoses: Securely connect the vacuum hose to the suction inlet on the main unit and to the wand/nozzle assembly. Connect the spray hose from the water pump outlet to the spray nozzle on the wand.
  4. Prepare Cleaning Solution: Fill the clean water tank (10L capacity) with water and the recommended carpet cleaning solution according to the solution manufacturer's instructions. Do not overfill.
  5. Position the Machine: Place the cleaner on a stable, level surface near the area to be cleaned.
  6. Power Connection: Ensure the power switch is OFF, then plug the 7m power cable into a suitable grounded electrical outlet (220V-240V).

6. Operating Instructions

  1. Pre-Vacuum: For best results, thoroughly vacuum the area to be cleaned with a dry vacuum cleaner to remove loose dirt and debris.
  2. Turn On Power: Switch on the main power button on the control panel.
  3. Activate Pump: Turn on the water pump switch. Allow a few seconds for the pump to prime and build pressure.
  4. Apply Solution: Press the trigger on the wand to spray the cleaning solution onto the carpet. Apply an even coat, avoiding oversaturation.
  5. Vacuum: Turn on the vacuum motor switch. Slowly pull the wand across the sprayed area, allowing the vacuum to extract the dirty solution. Overlap passes slightly to ensure thorough cleaning.
  6. Rinse (Optional): For heavily soiled areas or to remove excess detergent, you may repeat the vacuuming process using only clean water in the solution tank.
  7. Monitor Tanks: Keep an eye on the clean water tank to ensure it doesn't run dry and the dirty water tank to prevent overfilling.
  8. Finish Cleaning: Once the area is clean, make a few dry passes with the vacuum to remove as much moisture as possible.
  9. Power Off: Turn off the pump switch, then the vacuum motor switch, and finally the main power switch. Unplug the machine from the outlet.
LC-30SC carpet cleaner in use in an office environment
Figure 3: LC-30SC in operation for commercial carpet cleaning

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your carpet cleaner.

  • Empty and Clean Tanks: After each use, empty both the dirty water tank and the clean water tank. Rinse them thoroughly with clean water to prevent residue buildup and odors.
  • Clean Hoses and Wand: Flush the spray hose with clean water to remove any remaining cleaning solution. Rinse the vacuum hose and wand assembly.
  • Check Filters: Inspect and clean any filters (e.g., motor protection filter) regularly. Replace if damaged or excessively dirty.
  • Wipe Down Exterior: Wipe the exterior of the machine with a damp cloth.
  • Store Properly: Store the machine in a dry, cool place, away from direct sunlight and extreme temperatures. Ensure hoses are coiled neatly to prevent kinks.

8. Troubleshooting

Problem Possible Cause Solution
Machine does not turn on No power supply; Power switch off; Circuit breaker tripped. Check power cord connection; Ensure switch is ON; Reset circuit breaker.
No spray from nozzle Clean water tank empty; Pump switch off; Nozzle clogged; Pump malfunction. Refill clean water tank; Turn pump switch ON; Clean nozzle; Contact support.
Low or no suction Dirty water tank full; Vacuum hose clogged/disconnected; Filter dirty; Vacuum motor issue. Empty dirty water tank; Check hose for blockages/connections; Clean/replace filter; Contact support.
Leaking water Hose connections loose; Tank not sealed properly; Damaged hose/tank. Tighten all hose connections; Ensure tank lids are secure; Inspect for damage and contact support if necessary.

9. User Tips

  • Test Cleaning Solution: Always test your cleaning solution on an inconspicuous area of the carpet first to ensure colorfastness.
  • Don't Oversaturate: Avoid applying too much cleaning solution, as this can lead to longer drying times and potential residue buildup.
  • Work in Sections: Clean carpets in small, manageable sections to ensure thorough cleaning and extraction.
  • Ventilate Area: Ensure good ventilation in the cleaning area to aid in drying and prevent mildew.
  • Regular Cleaning: For high-traffic areas, regular light cleaning is more effective than infrequent deep cleaning.

10. Warranty and Support

The NOBLE LC-30SC carpet cleaner comes with a 1-year warranty from the date of purchase, covering manufacturing defects. This warranty does not cover damage caused by misuse, neglect, accident, or unauthorized modifications.

For after-sales service, including free spare parts and online support, please contact our customer service team:

  • WhatsApp/Mobile: +86 13798691852
  • WeChat: mandy184826881
  • QQ: 423243028
  • Tel/Fax: +86 757 86292092
  • Website: www.stoneshine.cn

Our working hours are Monday to Friday, 9:00-22:00 (Beijing time). Please allow for time differences when expecting a reply.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.