Dobtian 1.8 inch offline controller

Contents

Dobtian GRBL Offline Controller Board User Manual

Model: 1.8 inch offline controller | Brand: Dobtian

1. Introduction

This manual provides comprehensive instructions for the safe and efficient operation of your Dobtian 1.8 inch GRBL Offline Controller Board. This controller is designed to manage 3-axis CNC engraving, carving, and milling machines, including models such as the 3018Pro, 1610, 2418, and 3018 series.

Package Contents

Please verify that all items listed below are included in your package:

  • 1 x 1.8 Inch Offline Controller Board
  • 1 x TF Card (128MB)
  • 1 x Connection Cable
GRBL Offline Controller Board, TF card, and connection cable
The GRBL Offline Controller Board, TF card, and connection cable included in the package.

2. Safety Information

Warning:

  • This product contains small parts which may pose a choking hazard. Keep out of reach of children under 3 years.
  • Be careful of sharp edges during handling and installation.

3. Specifications

General Specifications

Attribute Value
Brand Name Dobtian
Model Number 1.8 inch offline controller
Application Milling Machine
Is Smart Device No
Certification CE
Origin Mainland China

Controller Features

  • GRBL control for X/Y/Z three axes.
  • PWM pulse frequency duty cycle is adjustable.
  • Supports various file formats: NC, NCC, TAP, TXT, Gcode, GCO, NL, CUT, CNC.
  • Includes a free 128MB memory card and supports SD/TF memory cards.
  • Built-in battery for time adjustment.

Dimensions

Measurement Value
Length 10 cm (3.94 inches)
Width 4 cm (1.57 inches)
Height 2 cm (0.79 inches)
Dimensions of the GRBL Offline Controller Board
Physical dimensions of the controller board.

Package Details

Attribute Value
Package Length 20 cm
Package Width 13 cm
Package Height 4 cm
Package Weight 0.084 kg

4. Setup

Connecting the Controller to your CNC Machine

Follow these steps to connect the offline controller to your GRBL-compatible CNC machine:

  1. Ensure your CNC machine is powered off before making any connections.
  2. Locate the GRBL control port on your CNC mainboard.
  3. Connect one end of the provided cable to the controller board's designated port (often labeled 'Connect to CNC' or similar).
  4. Connect the other end of the cable to the GRBL control port on your CNC mainboard.
  5. Insert the provided TF card into the 'TF Card' slot on the controller board.
  6. Power on your CNC machine. The controller board should power on and display the main interface.
Detailed wiring diagram for the GRBL Offline Controller Board
Wiring diagram showing connections for the GRBL Offline Controller Board.

Setup Video Guide

For a visual guide on connecting and setting up your controller, please watch the following video:

Video: Product overview and demonstration of connecting the GRBL Offline Controller Board.

5. Operating Instructions

The controller features a 1.8-inch display and a set of buttons for navigation and control. The main interface allows access to different functions such as movement, file selection, and settings.

Controller Layout and Basic Navigation

The controller has several buttons for operation:

  • Movement Buttons (Yellow): X+, X-, Y+, Y-, Z+, Z- for axis control.
  • Function Buttons (Red): OK/Spindle, Step/Exit.
  • Navigation Buttons (Yellow): Ctrl, File, Sset (Settings) on the main page.

The main page typically shows options like 'Ctrl', 'File', and 'Sset'.

Key Functions Overview

Function Key
Move X, Y, Z Axes X+, X-, Y+, Y-, Z+, Z-
Spindle On/Off A (Spindle)
Step (Movement Increment) B (Step)
Back / Exit Menu B (Long press for Exit)

Detailed Operations

  1. Setting Origin (Control Interface Return): Use the 'Control interface return' function to set the current position as the origin point for your CNC job.
  2. Unlocking (Y+ on Main Page): From the offline main page, press 'Y+' to unlock the machine.
  3. Returning to Zero (Y- on Main Page): From the offline main page, press 'Y-' to return the machine to its zero position.
  4. Language Switching (Z+ on Main Page): From the offline main page, press 'Z+' to switch between Chinese and English languages.
  5. Adjusting PWM Pulse Frequency / Duty Cycle:
    • The PWM pulse frequency duty cycle is adjustable.
    • Short press 'Z+' or 'Z-' on the main page to adjust the laser power or spindle speed.
  6. Spindle Speed Switch:
    • Short press the 'EXIT' button on the homepage to switch the maximum spindle speed between 1000 and 10000. This setting applies when PWM is at 100% duty cycle.
  7. File Selection and Printing:
    • Navigate to the 'File' menu from the main page.
    • Select your desired NC, NCC, TAP, TXT, Gcode, GCO, NL, CUT, or CNC file from the TF card.
    • Confirm the selection to prepare for printing.
    • The screen will show 'Ready To Print' then 'Printed: X%' during operation.
  8. Settings (Sset):
    • Move Increment: Adjust the movement step size (e.g., 10mm/T, 0.1mm/T, 1mm/T, 5mm/T).
    • Baud Rate: Set the communication baud rate (e.g., 9600, 115200).

6. User Tips

  • Compatibility Check: Before purchasing, thoroughly research and verify the compatibility of this controller with your specific CNC machine's mainboard and available ports. Some CNC machines, like certain versions of the ttc3018, may not have the necessary serial port on their remote control connectors for direct adaptation.
  • External Power Supply: If your CNC machine does not provide sufficient power to the controller, or for testing purposes, an external power supply unit can be used to power the offline controller board.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the controller board. Avoid using liquid cleaners or solvents that could damage the electronic components.
  • Storage: Store the controller in a dry, dust-free environment when not in use. Protect it from extreme temperatures and humidity.
  • Connections: Periodically check all cable connections to ensure they are secure and free from damage.

8. Troubleshooting

Common Issues and Solutions

  • Controller Not Responding / No Display:
    • Check all power and connection cables to ensure they are securely attached.
    • Verify that your CNC machine is powered on and providing power to the controller.
    • If necessary, try powering the controller with an external power supply (refer to User Tips).
  • File Not Loading or Recognized:
    • Ensure the TF card is properly inserted into the slot.
    • Verify that the file format is supported (NC, NCC, TAP, TXT, Gcode, GCO, NL, CUT, CNC).
    • Check if the file on the TF card is corrupted or improperly saved.
  • Axis Movement Issues:
    • Confirm that the motor connections for the respective axes are correct and secure.
    • Check the 'Step' settings in the controller's menu to ensure appropriate movement increments.
    • Ensure there are no physical obstructions preventing axis movement.
  • Spindle Not Activating:
    • Verify the spindle connection to the CNC mainboard.
    • Ensure the 'A (Spindle)' button is pressed to turn the spindle on.
    • Check the PWM settings and maximum spindle speed settings in the controller.

9. Warranty and Support

For technical support, warranty inquiries, or further assistance, please contact the manufacturer or their authorized representatives:

Manufacturer Contact

  • Company: Guangzhou Dechuang trading Co.,Ltd
  • Address: Room218, No.1 Xingheng East Street, Nansha Street, Nansha District, Guangzhou
  • Email: supercooper2018@126.com

EU Representative Contact

  • Company: ECLATSOLUTIONSARL
  • Address: Bureau1145, 37Passage duPonceau, 75002 Paris, France
  • Email: eclatsolution@outlook.com
  • Phone: +33187652619

A detailed user manual in PDF format is also available. You can view it here.

© 2024 Dobtian. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.