HXCONTROLLER 80A MPPT Solar Charge Controller

Contents

HXCONTROLLER MPPT Solar Charge Controller User Manual

Model: 80A MPPT Solar Charge Controller

1. Introduction

This manual provides essential information for the safe and efficient operation of your HXCONTROLLER MPPT Solar Charge Controller. This controller is designed for solar off-grid power generation systems, automatically managing battery charging and discharging. It utilizes an advanced tracking algorithm to maximize power harvest from solar panels and includes a Low Voltage Disconnect (LVD) function to prevent battery over-discharge. The optimized battery charging process extends battery life and enhances overall system performance. Please read this manual thoroughly before installation and use to ensure proper functionality and to leverage all features of your controller.

2. Key Features

  • Advanced MPPT (Maximum Power Point Tracking) technology with tracking efficiency no less than 99.5%.
  • LCD display for dynamic display of operation data and working status.
  • Compatible with multiple battery types: Sealed, GEL, Flooded, and LiFePO4. User-defined battery charging parameters are adjustable.
  • Dual USB 5V charging ports.
  • Automatic system voltage identification: 12V/24V/36V/48V/60V/72V/84V/96V.
  • Comprehensive protection functions: Over-voltage, Over-current, Over-temperature, Photovoltaic array short-circuit, Over-voltage, Over-current reverse connection, Battery overcharge, Reverse connection, and Under-voltage protection.
  • Backlight display for improved visibility.
  • Maximum input solar panel voltage (Voc) is 230Vdc.
  • Supports RS485 WIFI Device (sold separately).

3. Setup and Installation

3.1 Safety Clearances

Ensure adequate ventilation and heat dissipation by maintaining the following safety clearances around the controller. No other equipment or objects should be within this range.

Diagram showing recommended safety distances for controller installation: 20cm left/right, 30cm up/down.
Figure 3.1: Recommended Installation Safety Distances
Table 3.1: Safety Distance Requirements
DirectionSafe Distance
Left and Right20 cm
Up30 cm
Down30 cm

3.2 Wiring Instructions

Follow the correct wiring sequence to prevent damage to the controller and other components:

  1. First, connect the positive (+) and negative (-) electrodes of the battery.
  2. Next, connect the positive (+) and negative (-) poles of the DC load.
  3. Finally, connect the positive (+) and negative (-) poles of the solar panel.
Wiring diagram for the MPPT solar charge controller showing connections for PV panel, battery, and DC load.
Figure 3.2: Connection Diagram

The connection diagram illustrates the proper order and terminals for connecting the solar panel, battery, and DC load to the controller. Ensure all connections are secure and correctly polarized.

Front view of the HXCONTROLLER MPPT Solar Charge Controller with LCD display and control buttons.
Figure 3.3: Front View of the Controller
Bottom view of the HXCONTROLLER MPPT Solar Charge Controller showing terminal box cover plate, temperature sensor interface, solar panel terminals, battery terminals, DC load terminals, RS485 interface, and cooling hole.
Figure 3.4: Bottom View with Connection Points
  • 1. Temperature sensor interface: Connect the external temperature sensor here.
  • 2. Solar panels: Connect the positive and negative leads from your solar panels.
  • 3. Battery: Connect the positive and negative leads to your battery bank.
  • 4. DC load: Connect your DC loads here.
  • 5. RS485 interface: For communication with external devices like WIFI modules.
  • 6. Terminal box cover plate: Protects the wiring terminals.
  • 7. LCD display: Shows operational data and settings.
  • 8. Cooling hole: Ensures proper heat dissipation.

4. Operating Instructions

4.1 LCD Display Overview

The LCD provides real-time information about the system's status.

LCD display showing PV voltage, controller generation wattage, charging current, battery voltage, and total power generation.
Figure 4.1: LCD Display Information
  • 1. DC Voltage: Displays the current DC voltage.
  • 2. Controller Generation Wattage: Shows the power being generated by the controller.
  • 3. Charging Current: Indicates the current flowing into the battery.
  • 4. Battery Voltage: Displays the current battery voltage.
  • 5. Total Power Generation: Accumulative power generated.

4.2 Parameter Setting Steps

To adjust settings, use the control buttons below the LCD display. The buttons are: SET (Back), UP (+), DOWN (-), and CONFIRM (3S).

Diagram illustrating the parameter setting steps on the MPPT controller's LCD screen using the SET, UP, DOWN, and CONFIRM buttons.
Figure 4.2: Parameter Setting Flowchart
  1. Enter Main Menu: Press the SET button to enter the main menu. Use UP or DOWN to navigate through submenus.
  2. Select Content: Select the desired setting (e.g., Language, DC Output, Battery Type, Charging Current, Reset) and press CONFIRM to enter.
  3. Language Setting: Choose between Chinese and English.
  4. DC Output Setting: Turn DC output ON or OFF for the load.
  5. Battery Type Setting: Select from built-in battery types (Lead Acid, Gel, LiFePO4, Li-ion) or choose "USER" for custom settings. After selecting, press CONFIRM to set the required voltage.
  6. Charging Current Setting: Adjust the charging current. Refer to the "Parameter Table" in the Specifications section for product-specific ranges.
  7. Restore Factory Settings: If needed, select "Reset total" to clear all records and restore default settings.

A video demonstration of setting the battery type is available:

Video 4.1: Demonstrating Battery Type Setting on the Controller

5. Maintenance

Regular maintenance ensures optimal performance and longevity of your solar charge controller.

  • Cleaning: Keep the controller clean and free from dust and debris. Use a dry cloth to wipe the exterior. Ensure cooling holes are unobstructed.
  • Connections: Periodically check all wiring connections for tightness and corrosion. Loose connections can lead to power loss or overheating.
  • Battery Health: Monitor battery voltage and performance. The controller automatically compensates charging based on battery temperature to prolong battery life.
  • Environmental Conditions: Ensure the controller is operating within its specified working environment temperature range (-10℃ to +45℃) and humidity (0-90% RH, non-condensing).
  • Firmware Updates: If available, check the manufacturer's website for any firmware updates that may improve performance or add features.
Image showing automatic fan cooling, easy installation, and HD LCD screen features of the controller.
Figure 5.1: Maintenance-related features: Automatic fan cooling and easy installation.
  • Automatic fan cooling: The controller features an internal fan for active cooling, which helps maintain optimal operating temperatures. Ensure the fan intake and exhaust are clear.
  • Easy installation: The design facilitates straightforward installation, but proper wiring and safety clearances are crucial.
  • HD LCD screen: The clear display aids in monitoring and setting parameters.

6. Troubleshooting

This section provides guidance on common issues you might encounter with your MPPT solar charge controller.

6.1 Common Protection Functions

The controller is equipped with several protection mechanisms to ensure system safety and longevity:

Diagram illustrating various protection features of the MPPT solar charge controller: Self-recovery, Short-circuit Protection, Reverse Connect Protection, Open-circuit Protection, Over-current Protection, High-temperature Protection.
Figure 6.1: Controller Protection Features
  • Self-recovery: The controller can recover from certain fault conditions automatically.
  • Short-circuit Protection: Protects against short circuits in the PV array, battery, or load.
  • Reverse Connect Protection: Prevents damage from incorrect polarity connections for PV, battery, and load.
  • Open-circuit Protection: Safeguards against open circuits in the system.
  • Over-current Protection: Limits current to prevent damage from excessive current flow.
  • High-temperature Protection: Reduces power output or shuts down if internal temperature exceeds safe limits (above 80°C).

If an alarm is triggered (indicated by the ALARM icon on the LCD), check the connections and system status. For persistent issues, consult the "Restore factory settings" option in the Operating Instructions or contact support.

7. Specifications

Below are the detailed technical specifications for the HXCONTROLLER MPPT Solar Charge Controller.

Decorative banner with text 'Parameter Table'.
Figure 7.1: Parameter Table Overview
Table 7.1: General Specifications (80A Model)
FeatureDescription
MPPT Model80A
Rated Charging Current80A
Maximum PV Input Power
  • 12V system: 960W
  • 24V system: 1920W
  • 36V system: 2880W
  • 48V system: 3840W
  • 60V system: 4800W
  • 72V system: 5760W
  • 84V system: 6720W
  • 96V system: 7680W
Charging ModeMPPT automatic maximum power tracking, fast charging, balanced charging, and floating charging.
Battery Type CompatibilityLead Acid (12V/24V/36V/48V/96V auto-identification + adjustable), Gel (12V/24V/36V/48V/60V/72V/84V/96V adjustable), Lithium Iron Phosphate (Unit voltage 3.2V * strings, 2-45 adjustable), Ternary Lithium (Unit voltage 3.7V * strings, 2-45 adjustable), User Defined (Equalizing charge, floating charge, DC discharge limit voltage adjustable: 8V-170V).
Lithium Activation FunctionWith photovoltaic input, charging voltage is available (activates lithium battery), and DC output can be used without battery.
Photovoltaic Minimum Voltage Start ChargingPV voltage > battery voltage + 3V (can also charge with small current on rainy days).
PV Maximum Open Circuit Input Voltage0-230V
Photovoltaic Charging Current Adjustable0-80A
DC Current Output (Street Lamp Function)Continuous output 60A
Temperature CompensationAutomatically compensates charging voltage and current based on battery temperature.
LCD Touch ButtonDisplays generating capacity, PV voltage, battery voltage, charging current, power, operation status. Settings for battery type, charging current, factory reset, Chinese/English display.
RS485 Communication8-pin RS485 communication interface for querying operation status and settings.
Working Environment Temperature-10℃ to +45℃
Static Power Consumption2W
Overall Efficiency96.5% ~ 99%
Temperature Protection85℃
Temperature Rise ProtectionReduces power output above 80℃.
Humidity0-90% RH (no condensation)
Mechanical Protection LevelIP21
Altitude0-3000m
Size26.7cm * 17.9cm * 9.1cm
Net / Gross Weight2.9KG
Package Size315mm*240mm*120mm

Controller Dimensions for other models:

  • 40A: 21.8 * 16.4 * 9 CM
  • 60A and 80A: 26.7 * 17.9 * 9.1 CM
  • 100A: 31.8 * 22.2 * 10.1 CM
Detailed parameter table for various MPPT controller models (30A, 40A, 60A, 80A, 100A, 120A) covering rated charging current, maximum PV input power for different system voltages, charging modes, battery types, and other technical specifications.
Figure 7.2: Comprehensive Parameter Table (Part 1)
Continuation of the parameter table, detailing LCD touch button functions, RS485 communication, working environment temperature, static power consumption, overall efficiency, temperature protection, humidity, mechanical protection level, altitude, size, and weight for different models.
Figure 7.3: Comprehensive Parameter Table (Part 2)
Image showing the HXCONTROLLER MPPT Solar Charge Controller compatible with multiple battery types: Lithium, Flooded, Sealed, Gel, and User Custom Battery. It also indicates auto-matching for 12/24/48/60/72/96V systems and 3-stage charging (Equalize, Boost, Float Charge).
Figure 7.4: Battery Type Compatibility and Charging Stages

The controller boasts high tracking efficiency of up to 98% and a peak conversion efficiency of 99%, ensuring maximum power harvest from your solar panels.

8. User Tips

  • For optimal performance, ensure your solar panel array voltage (Voc) does not exceed 230Vdc.
  • When setting custom battery parameters, carefully refer to your battery manufacturer's specifications to avoid damage.
  • Consider purchasing the optional RS485 WIFI device for remote monitoring and control of your solar system.
  • Always connect the battery first and disconnect the solar panel last during installation or maintenance to prevent damage.

9. Warranty and Support

For warranty information and technical support, please refer to the official HXCONTROLLER website or contact your retailer. Keep your purchase receipt as proof of purchase for any warranty claims.

© 2024 HXCONTROLLER. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.