HZTZ Y50

Contents

HZTZ Y50 Series Smart Label Printer User Manual

Thank you for choosing our printer. Please read this manual carefully and keep it for future reference.

1. Package Contents

Please check the package contents upon unboxing:

  • Printer x1
  • User Manual x1
  • USB Type-C Cable x1
Y50 Printer Package Contents
Image: Y50 printer, user manual, USB-C cable, and a roll of labels.

2. Appearance and Components

Familiarize yourself with the printer's components and indicator light statuses:

2.1 Indicator Light Status

IndicatorStatusDescription
GreenSolidThe printer is in normal standby state.
RedSteady onOut of paper / Low Battery / Print head overheating / Paper compartment open.
RedBlinkingCharging.
OrangeSolidFirmware upgrading mode.
BlueBlinkingPrinting.
BlueSolidBluetooth connected.

2.2 Components Overview

  • Tear-off Blade: For cleanly detaching printed labels.
  • Open Slide: Slide to open the paper compartment.
  • Reset Button: Used for device reset (typically a small pinhole button).
  • Charging Port (Type-C): For connecting the USB Type-C charging cable.
  • Indicator Light: Shows the printer's status.
  • Power Button: For turning the printer on/off and other functions.

3. Setup

3.1 Charging the Printer

  • For protecting battery life, charging while printing is not recommended.
  • When the battery is low, the indicator light will be red. If you continue to print with low battery, the printer will be turned off automatically. Please charge the battery to continue printing.
  • The battery needs 2.5-3 hours to be fully charged.
  • At least charge the battery once every 2 to 3 months to ensure its normal function.
  • If the device cannot be turned on, please charge for 1 hour at least.
  • Charging with more than 5V voltage will damage the printer.

3.2 Installing the App

Before using the printer, please install the FlashLabel Pro app from App Store or Google Play. You can also scan the QR code below to install the app.

On the Home screen of the FlashLabel Pro app, you'll find thousands of templates after tapping 'Template'.

FlashLabel Pro App Interface
Image: Y50 printer with a smartphone displaying the FlashLabel Pro app interface and various custom labels.

3.3 Fitting Paper

  1. Press and hold the Power button for two seconds to turn on the printer. Press the Open Slide on the right to open the paper compartment.
  2. Push the paper compartment baffle to the sides, and fit the label paper into the paper compartment with the print side facing down. Danger! Beware of the sharp Tear-off blade when the paper compartment is open.
  3. Push the paper compartment baffle inwards to secure the label paper. Pull the first paper out, making sure it sticks out of the paper exit.
  4. Close the paper compartment. The printer will automatically detect the label paper and return a label back to the paper compartment.

4. Operating Instructions

4.1 Basic Functions

FunctionOperation
Switch onPress and hold the Power button for two seconds.
Switch offPress and hold the Power button for two seconds when the device is on.
Detect a labelPress the Power button once when the device is on.
Print a test pageDouble-press the Power button when the device is on.

4.2 Connecting and Printing

  1. Open the FlashLabel Pro app and turn on Bluetooth on your phone. Make sure the printer is turned on.
  2. On the app's Home screen, tap the 'Connect' button, then select your printer (e.g., Y50_BA1B_BLE) and click 'Connect'.
    Notice: If a PIN code is required, input 0000 or 1234.
  3. After connecting, tap '+' to create a new label, or tap 'Template' on the Home tab to enter the label editor.
  4. After editing your label, click the 'Print' button in the top right corner to preview and print labels.
Video: Demonstration of connecting the Y50 printer via Bluetooth and printing various labels from the FlashLabel Pro app.
Y50 Printer Label Applications
Image: Y50 printer demonstrating various label applications in different industries (factory material labels, clothing store hang tags, household category labels) and showing supported label paper types (square, round, 57mm receipt, label maker, jewelry labels).

5. Maintenance

5.1 Cleaning Print Head and Roller

Please clean the print head and roller if one of the following situations occurs:

  • Poor printing quality.
  • Noise during printing or paper rolling.
  • Foreign objects on the print head.

Clean the print head and roller using the following procedures:

  1. Turn off the printer.
  2. Open the paper compartment and locate the print head. Wait for the print head to cool down completely if you have recently printed.
  3. Rotate the roller by hand and use an alcohol cotton swab (should be dry) to wipe the dust and stains off its surface.
  4. Use an alcohol cotton swab (should be dry) to wipe the dust or stains off the print head.
  5. Wait for at least 5 minutes for the alcohol to fully evaporate, then fit the label paper and close the paper compartment.

Important Notices:

  • Make sure the printer is turned off during cleaning.
  • Avoid touching the print head with your hand or any metal objects; do not scratch the surface of the print head / roller / sensor with tools such as tweezers.
  • Do not use acetone, gasoline, or other organic solvents to clean the print head and the roller.
  • Turn on the power to continue printing until the alcohol completely evaporates.
  • Always keep the surface of the print head / roller / sensor clean.

6. Troubleshooting (FAQs)

  • Q: Do I need to enable permission to obtain location information?
    A: Due to Android system's requirement, you need to enable location to turn on Bluetooth.
  • Q: What is the PIN code?
    A: Most default PIN codes are 0000; under special circumstances, you can try 1234.
  • Q: What to do if the printing is poor or small?
    A: 1. Clean Print Head and Roller.
    2. Replace with good quality label paper.
    3. Check if the size of the label paper fits the templates in the App. If you create a new label, the size of the label you created must be the same as the label paper.
  • Q: Why print blank?
    A: Make sure the print side of label paper faces down. You can try to change the direction of the label paper roll.

7. Specifications

Detailed specifications for the HZTZ Y50 Series Smart Label Printer:

ParameterDetailParameterDetail
ProductLabel PrinterModelY50/Y50P
Dimensions121 × 85 × 56.3mmWeight243g
Charging Time2.5HOperating Temperature5℃ - 40℃
Battery Capacity1700mAhPrinting MethodThermal printing
Printing Resolution203dpiPrinting Width15 - 46mm
ConnectivityBluetoothChargeType-C
Y50 Printer Product Parameters
Image: Table detailing Y50 printer specifications including machine name, resolution, print speed, machine size, connection mode, max print width, battery, bare weight, and packing specifications.
Y50 Printer Dimensions
Image: Y50 printer dimensions (8.5cm/3.35in width, 5.8cm/2.28in depth, 12.1cm/4.76in height).
Y50 Printer Lightweight Design
Image: Y50 printer held in a hand, illustrating its lightweight and compact design (0.46 lb / 210g).

8. User Tips

  • Inspect Upon Arrival: Although the product is robust, always check the printer for any damage immediately after receiving it, especially if the packaging appears compromised.
  • Model Identification: The printer model is typically Y50, but some units may be marked as Y50P. Both refer to the same series of smart label printers.
  • Optimal Label Use: For best print quality, ensure you are using thermal label paper specifically designed for label makers.

9. Safety Precautions

Please read and follow these safety guidelines to ensure safe operation and prevent damage:

  • Do not disassemble the product without authorization. Disassembled products cannot be returned or exchanged.
  • Do not use the product near places with flammable products such as gas stations or fuel depots.
  • Do not wipe the product with corrosive chemicals or cleaning agents.
  • There is a built-in lithium battery; please do not use it in environments with temperatures higher than 40°C. Keep away from fire and other heat sources, and do not place it in direct sunlight, such as in a closed car.
  • Children should be charged and use the device under the supervision of adults. After full charge, please make sure to pull out the charging line in time to prevent overheating, short circuits, or fire.
  • Working environment: 0°C-40°C ambient temperature, relative humidity 30%-85%RH (non-condensing). Please do not exceed the recommended temperature range.
  • If you suspect that there is a problem with the battery, please contact the after-sales service center for assistance.

FCC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.