Lishui Controller LSW1729-1M

Contents

Brushless Motor Controller LSW1729-1M User Manual

For E-Bike & Scooter Conversion Kits

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of your LSW1729-1M Brushless Motor Controller. This controller is designed for 48V systems with a 20A maximum current, suitable for various E-Bike and Scooter conversion kits. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Specifications

FeatureSpecification
TypeController
ModelLSW1729-1M
Rated Voltage48V
Maximum Current20A
Rated Current10A
Low Voltage Protection41V
Throttle Adjustment Voltage1.2V-4.4V
Dimensions (L x W x H)105mm x 49mm x 29mm
Weight352g
OriginMainland China

The controller's label provides these specifications directly:

Close-up of LSW1729-1M controller label showing specifications.
Figure 1: Controller Label with Specifications

3. Installation & Wiring

3.1 Compatibility Check (Crucial Step)

Before attempting installation, it is critical to verify the communication protocol compatibility of this controller with your existing e-bike or scooter system. Incompatible protocols can lead to error codes on your display or non-functionality.

  • Verify Model Number: Compare the model number on your original controller with LSW1729-1M.
  • Consult Customer Service: If unsure about compatibility, send photos of your original controller's label and all connectors to customer service for verification. This ensures you receive the correct product and avoids potential issues.

3.2 Controller Overview

The controller acts as the central processing unit for your e-bike's electrical system, managing power and signals from various components. It connects to the motor, display, throttle, brake levers, and pedal assist sensor.

Brushless Motor Controller LSW1729-1M with various connection wires.
Figure 2: LSW1729-1M Controller with Wires
LSW1729-1M controller with all connectors individually numbered for identification.
Figure 3: LSW1729-1M Controller Connectors

Refer to Figure 3 for a visual guide to the various connectors. Each connector serves a specific function:

  • Power Supply: Connects to the battery.
  • Motor Hall Sensor Wires: Provides feedback on motor position.
  • Brakes: Connects to brake levers for motor cut-off.
  • Throttle Grip: Controls motor speed.
  • Pedal Assist Sensor (PAS): Detects pedaling input.
  • Bike Headlight: For lighting control (if applicable).
  • Motor: Connects to the motor's power phases.

3.3 Physical Dimensions

Ensure adequate space for installation based on the controller's dimensions.

LSW1729-1M controller with dimensions: 105mm length, 49mm width, 29mm height.
Figure 4: Controller Dimensions

4. Operation

The LSW1729-1M controller facilitates the operation of your e-bike or scooter by processing signals from user inputs and system sensors. Key operational aspects include:

  • Throttle Control: Adjusts motor speed based on throttle input (1.2V-4.4V range).
  • Pedal Assist: Engages motor assistance when pedaling is detected by the PAS.
  • Brake Cut-off: Disengages motor power when brakes are applied for safety.
  • Low Voltage Protection: Automatically cuts off power if battery voltage drops below 41V to protect the battery.

4.1 App Integration (If Applicable)

Lishui controllers often support app integration for enhanced control and monitoring. If your system includes an IoT module and a compatible app, you may access features such as:

  • Speed and Range Meter
  • Battery Capacity Indicator
  • Light Control
  • PAS Level Control
  • Remote Lock/Unlock
  • GPS Location Tracking
  • Riding Activity Records

The app is typically compatible with both Android and iOS smartphones. Refer to your e-bike/scooter manufacturer's instructions for specific app setup and usage.

5. Maintenance

The LSW1729-1M controller is designed for durability and low maintenance. No specific routine maintenance is required for the controller itself beyond general care of your e-bike or scooter.

  • Keep Dry: Protect the controller from excessive moisture and water exposure.
  • Clean Gently: If cleaning is necessary, use a soft, dry cloth. Avoid harsh chemicals or abrasive materials.
  • Inspect Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion or damage.

6. Troubleshooting

  • Error Codes on Display: If your display shows error codes after installation, the most common cause is an incompatible communication protocol between the controller and other components. Re-verify compatibility as described in Section 3.1.
  • No Power/Intermittent Power: Check all power connections, including battery, motor, and controller. Ensure the battery is charged and functioning correctly.
  • Motor Not Responding: Verify motor Hall sensor connections and throttle/PAS connections. Ensure the brake levers are not engaged, as they cut off motor power.
  • Incompatibility Issues: If your original controller model differs, ensure that the communication protocols match. In some cases, connectors can be modified to achieve compatibility; consult customer service for guidance.

7. User Tips

  • Always Confirm Compatibility: To avoid issues, always send photos of your original controller's label and connectors to customer service before purchasing a replacement.
  • Understand Communication Protocols: Be aware that different controller models use different communication protocols. Compatibility is key for proper function.
  • Consider Connector Modification: If protocols match but connectors differ, it may be possible to modify the connectors. Seek professional assistance if needed.

8. Frequently Asked Questions (FAQ)

Q: Why do I need to provide a photo of the controller label?
A: Many buyers are unfamiliar with controllers. Providing a photo of your original controller's label helps us verify the correct product purchase, preventing wasted time and money due to incompatibility.
Q: Can I use your controller if my model differs from yours?
A: Different controller models use different communication protocols. Replacement is possible only if the communication protocols match. Typically, e-bike controllers consist of connectors for the power supply, motor Hall sensor wires, brakes, throttle grip, pedal assist sensor, bike headlight, and motor. As long as you can modify the controller connectors (we can assist with this modification), our controller can replace your original one.
Q: How do I find my controller model if I don't know it?
A: Send photos of the controller label and display screen serial number to our online customer service. We'll identify your controller model and recommend a suitable replacement.

9. Support & Contact

For further assistance, technical support, or inquiries, please contact Lishui Controller customer service. Our dedicated after-sales team is ready to provide quick responses and support.

Lishui Electronics Europe GmbH

  • Address: Am Bahnhof 21, 53757 Sankt Augustin, Germany
  • Mobile: +49 15221467527
  • Tel: +49-2241-9454576
  • Fax: +49-2241-9454577
  • Email: info@lsee.eu

Nanjing Lishui Electronics Research Institute Co., Ltd

  • Address: No.9 Shuibao Road, Yongyang Town, Lishui District, Nanjing, 211200, P.R.China
  • Tel: +86-25-5720-2368 / +86-25-5720-7820
  • Fax: +86-25-5721-2368
  • Email: sales@lsdzs.com

For more detailed information, you may also refer to the official Lishui Controller Brochure PDF: Lishui Controller Brochure (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.