ROBORE SF20

Contents

ROBORE SF20 Treadmill User Manual

Your guide to setting up, operating, and maintaining your ROBORE SF20 Treadmill.

1. Introduction

The ROBORE SF20 Treadmill is designed for home use, offering a versatile and efficient workout experience. Featuring a powerful 3.0 HP brushless motor, a 15% manual incline, and a triple shock absorption system, it provides a comfortable and effective way to achieve your fitness goals. Its foldable design ensures easy storage, making it ideal for any living space.

ROBORE SF20 Treadmill overview
Figure 1: ROBORE SF20 Treadmill in its operational state.

2. Setup and Assembly

The ROBORE SF20 Treadmill comes pre-assembled, requiring no complex setup. Simply unpack, unfold, and connect to power.

2.1 Unfolding the Treadmill

  1. Carefully remove the treadmill from its packaging.
  2. Place the treadmill on a flat, stable surface. Ensure there is at least 2 meters (6.5 feet) of clear space behind the treadmill and 0.6 meters (2 feet) on each side.
  3. Gently lower the running deck until it locks into place.
Folding and unfolding sequence of the treadmill
Figure 2: Visual guide for unfolding and folding the treadmill for storage.

2.2 Power Connection

  1. Ensure the treadmill's power switch is in the 'OFF' position.
  2. Plug the power cord into a grounded electrical outlet.
  3. Turn the power switch to the 'ON' position.

3. Operating Instructions

3.1 Control Panel Overview

The treadmill features an intuitive button control panel with a triple-screens LED display. Familiarize yourself with the buttons:

Close-up of the treadmill control panel with button functions
Figure 3: Detailed view of the control panel and its functions.
  • Start (ⓒ): Begins your workout.
  • Stop (Ⅱ): Halts the running belt.
  • Speed+ (▲): Increases the running speed.
  • Speed- (▼): Decreases the running speed.
  • Fast Adjustment (2/4): Quickly adjusts speed to preset levels (e.g., 2 km/h, 4 km/h).
  • Program/Mode (P/M): Selects different workout programs or modes.
  • Emergency Stop Button (Red): Press immediately to stop the treadmill in an emergency. Always attach the safety key clip to your clothing before starting a workout.

3.2 Starting a Workout

  1. Stand on the side rails of the treadmill.
  2. Attach the safety key clip to your clothing.
  3. Press the 'Start' button. The belt will begin moving at a low speed.
  4. Gradually increase your speed using the 'Speed+' button to your desired pace.

3.3 Adjusting Speed and Incline

The treadmill offers three main speed ranges:

  • Walking Mode: 1-3 km/h
  • Jogging Mode: 3-6 km/h
  • Running Mode: 6-12 km/h

Adjust speed using the 'Speed+' and 'Speed-' buttons or the 'Fast Adjustment' buttons.

The treadmill features a 15% manual incline. To adjust the incline, you will need to physically lift the rear of the treadmill and secure it at the desired incline level. Refer to the base of the treadmill for specific adjustment points.

Person running on treadmill with 15% manual incline, showing calorie burn comparison
Figure 4: Demonstrating the 15% manual incline feature and its benefits.

3.4 Using the Tablet Holder

The integrated tablet holder is designed with a 135° Golden Elevation for optimal viewing during your workout. Place your tablet securely in the holder to enjoy entertainment or follow guided workouts.

Treadmill tablet holder at 135 degree angle
Figure 5: The 135° Golden Elevation of the tablet holder for comfortable viewing.

3.5 Folding for Storage

To fold the treadmill for storage, ensure the treadmill is off and unplugged. Lift the running deck until it locks into its vertical position. The built-in transport wheels allow for easy movement.

Folded treadmill stored under a sofa
Figure 6: The treadmill's compact folded state, ideal for space-saving storage.

4. Maintenance

Regular maintenance ensures the longevity and optimal performance of your ROBORE SF20 Treadmill.

4.1 Cleaning

  • Wipe down the treadmill surfaces, including the console and handrails, with a damp cloth after each use to remove sweat and dust.
  • Avoid using abrasive cleaners or solvents that could damage the finish.

4.2 Running Belt

The treadmill features a 7-layer non-slip diamond-textured running belt. Periodically check the belt for any signs of wear or damage. Ensure the belt is centered and properly tensioned. If the belt feels loose or slips, it may need adjustment.

Close-up of the non-slip diamond texture running belt
Figure 7: The non-slip diamond texture of the running belt for enhanced grip.

4.3 Shock Absorption System

The treadmill is equipped with 8 built-in shock absorbers and 2 external shock-absorbing mats, forming a triple shock absorption system. This system is designed for durability and requires minimal maintenance. Ensure the external mats are clean and free from debris.

Diagram illustrating the treadmill's shock absorption layers
Figure 8: Diagram of the multi-layer shock-absorbing system.

4.4 Motor

The 3.0 HP brushless motor is designed for quiet operation and a long service life of approximately 3500 hours (8-10 years). It is generally maintenance-free. Keep the area around the motor clean and free of dust buildup to ensure proper ventilation.

Detailed view of the 3.0 HP brushless motor
Figure 9: Internal view of the 3.0 HP brushless motor.

4.5 Lubrication

While the treadmill is designed for low maintenance, periodic lubrication of the running belt may be required. Consult the specific instructions provided with your treadmill's lubrication kit or contact customer support for guidance on proper lubrication procedures and frequency.

5. Troubleshooting

If you encounter any issues with your treadmill, refer to the following common troubleshooting steps:

5.1 Treadmill Not Starting

  • Ensure the power cord is securely plugged into a grounded outlet and the treadmill.
  • Check that the power switch is in the 'ON' position.
  • Verify that the safety key is correctly placed on the console. The treadmill will not operate without the safety key.
  • Check your home's circuit breaker if the treadmill receives no power.

5.2 Running Belt Slipping or Hesitating

  • The running belt may be too loose. Refer to the maintenance section or contact support for instructions on how to adjust belt tension.
  • The belt may require lubrication. Follow the lubrication instructions if applicable.

5.3 Unusual Noises

  • Stop the treadmill immediately and unplug it.
  • Inspect the area around and under the running belt for any foreign objects.
  • Check for any loose screws or components on the frame or motor cover.
  • If the noise persists after checking, contact customer support.

6. Specifications

Category Detail
General
  • Brand: ROBORE
  • Type: Treadmill
  • Model: SF20
  • Color: Black
Performance & Features
  • Incline: 15% Manual Incline
  • Motor: 3.0 HP Brushless Motor
  • Noise Level: < 45 dB
  • Motor Service Life: 3500 Hours (8-10 Years)
  • Power Consumption: < 0.5 kWh
  • Running Belt Type: 7-Layer Non-Slip Diamond Texture Running Belt
  • Running Belt Dimensions: 97 × 40 cm
  • Shock Absorption System: 8 Built-in Shock Absorbers + 2 External Shock-Absorbing Mats (Triple Shock Absorption)
  • Speed Range: Walking (1-3 km/h), Jogging (3-6 km/h), Running (6-12 km/h)
  • Maximum Load Capacity: 136 kg / 265 lbs
  • Control Method: Button Control
  • Display: Triple-Screens Display
  • Tablet Holder Angle: 135° Golden Elevation
  • With Speakers: No
  • Bluetooth connection available: No
  • Adjustable slope: No (Manual Incline)
  • Screen: Yes
  • Heart Rate Test: Without
  • Driving Power: Electric
  • Function: Multifunctional
  • Application: Home Use Treadmill
  • Type of sports: Cardio Training
Dimensions & Weight
  • Product Weight: 18.5 kg
  • Product Size (L x W x H): 113 × 55.3 × 100 cm
  • Folded Thickness: 10.5 cm
  • Mobility: Built-in Transport Wheels
  • Package Weight: 21.3 kg
  • Package Size (L x W x H): 118 × 58 × 11.5 cm
Assembly & Contents
  • Assembly: No Assembly Required
  • Package Contents: 1 x Treadmill, 1 x User Manual

7. User Tips

Maximize your workout and ensure safety with these helpful tips:

  • Warm-up and Cool-down: Always begin your workout with a 5-10 minute warm-up (light walking or stretching) and end with a 5-10 minute cool-down to prevent injury and aid recovery.
  • Stay Hydrated: Keep a water bottle nearby and drink water regularly throughout your workout.
  • Use the Safety Key: Always attach the safety key clip to your clothing. This ensures the treadmill stops immediately if you accidentally step off.
  • Proper Footwear: Wear appropriate athletic shoes with good cushioning and support to protect your feet and joints.
  • Vary Your Workouts: Utilize the 15% manual incline to simulate outdoor running and engage different muscle groups, enhancing calorie burn and cardiovascular benefits.
  • Listen to Your Body: Do not overexert yourself. If you feel pain, dizziness, or shortness of breath, stop your workout immediately.

8. Warranty and Support

The ROBORE SF20 Treadmill typically comes with a 1-year warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included in your package or contact the seller directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.